我標到了一顆P3-733 (slot1) 733/256/133/1.65V S1 (cpu上黑殼子上寫)
我主機板 FIC(大眾) KA11 (bios已更新最新的QM415)
http://www.fic.com.tw/support/mother...ml?model_id=10
(上面pdf說明可以支援到P3-733 SECC2 133x5.5)
ftp://ftp.fic.com.tw/motherboard/cpu...slot1/KA11.pdf
結果...我裝上去後...開機顯示 Celeron 550 100x5.5 ....暈倒@@
去bios裡調cpu clock, 調成133/33 or 133/44 重新開機, 沒銀幕訊號,然後電腦就不動了
我主機板上外頻已經調為733,550,366(同一種調法)
電壓也試過auto, 1.65V, 1.7V
(sd ram兩條128mb的也是PC-133, 開機時有寫dram clock 133
顯卡是ELSA G2 MX400 64mb APG)
但...就是不能把外頻調成133...><
我sdram上面有貼"CL=3"的標籤
我去bios裡,關掉Auto Detect DIMM/PCI Clk, 然後把DRAM Clock調成HCLK-33M
SDRAM Cycle Length調成 "2", 重開機,
開機畫面上面還是寫 "Suggested DRAM clock = 100"&"Suggested DRAM CL = 3"
@@...再試著把cpu外頻調成133/33,開機還是沒銀幕...
還有,官方網站FAQ寫到...
Q9: The BIOS displays "Suggested DRAM clock = 133" upon booting but I am using
PC133 ram. The message goes away if I set DRAM Clock to HCLK-33M. Since I am
using a Coppermine 600EB 133MHz processor it only seems to be recognising the
RAM as PC100 speed. 4/20/2000
A: No matter what the FSB settings in the BIOS, for CPUs PIII-600(S.E.C.C. 2)
or PIII-600E (S.E.C.C. 2) the memory sub-system will always run at 100Mhz.
有關係嗎??
怎麼辦??拜託...謝謝大家∼
 |
回覆時引用此文章
書籤