Traxdata 2410ERK是一台很妙的機器

[IWC]

今天去光華買了,花了2200
很妙,只要用燒錄軟體開啟燒不死就一定會燒死
不開啟燒不死就燒不死
據說是這台有硬體啟動燒不死
就算燒錄軟體不支援燒不死也無所謂
但是如果去啟動燒錄軟體的燒不死功能就穩死
很難懂喔
反正用這台千萬別勾你燒錄軟體中的燒不死選項就對啦

[xemon]

may be LITEON OEM.

[IWC]

我覺得不是耶
他有兩個按鈕,比liteon多一顆面盤撥放
有誰知道這跟哪一台是相同的機器嗎??

CDRW-241040plus才是liteon代工,無面盤撥放

[nothing]

會不會是Seamless Link?????
Traxdata的燒錄機有蠻多廠商代工過.....

[andyd]

traxdata241040ERK這台是BTC 代工的(superlink)
traxdata241040E是aopen代工的(justlink)
那台superlink好像蠻多問題的..
justlink用起來還好

[IWC]

那如果要換軔體的話
可以跟哪一台共用??

[grant]

可是我的traxdata241040E備份防考的safedisc v2 沒有一次會成功的，有點差

[MIMIWIN1020]

我也是買了一樣的燒錄機，起先我還在用P-2 300的電腦時還沒問題，但換了AMD1G跟主機板
時，就出問題了，首先是怎麼燒都掛(毀了20多片空白光碟)跳出緩衝區不足，燒錄時緩衝區不穩，燒到8%就掛了，拿去益松檢查原來是燒錄機掛了，我買不到4個月ㄟ，也只燒了2.30片，拿去順發修好回家一試，情況沒改善，但在順發試就沒問題，"奈安奶"有人能幫幫我嗎?我該怎麼做?我的電腦:AMD1G,128M,微星K7 TURBO 3BAT，問題如下:
Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 1999/5/5 PM 10:22:00
Nero Version: 5.5.5.9
Recorder: <CDWRITER IDE2410> Version: A.23 - HA 0 TA 0 - 5.5.5.9
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
CD-ROM: <ASUS CD-S400> Version: 1.20 - HA 1 TA 1 - 5.5.5.9
Adapter driver: <ESDI_506
> HA 1
CDWRITER IDE2410 (Target 0, E: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
ASUS CD-S400 (Target 1, F: Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 127MB (130520kB)
Free physical memory: 0MB (752kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: On

CD-ROM (ISO)
13.7.2002

PM 05:13:26 #1 Phase 90 File dlgbrnst.cpp, Line 1436
Buffer Underrun Protection activated

PM 05:13:26 #2 Text 0 File Reader.cpp, Line 117
Reader running

PM 05:13:26 #3 Text 0 File Writer.cpp, Line 122
Writer IDE2410 running

PM 05:13:26 #4 ISO9660GEN -11 File geniso.cpp, Line 4306
First writeable address = 0 (0x00000000)

PM 05:13:26 #5 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 257732 (257732) = #257732/57:16.32
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

PM 05:13:28 #6 Text 0 File DlgWaitCD.cpp, Line 194
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 277479 (61:41.54)

PM 05:13:28 #7 Text 0 File DlgWaitCD.cpp, Line 1331
Recorder: CDWRITER IDE2410;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: B3 00 CE, 2: 61 1A 41 (LI 97:26.65), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 24 1A D8, 2: 26 B2 4A, 3: 00 80 80 (invalid)

PM 05:13:28 #8 Text 0 File ThreadedTransferInterface.cpp, Line 814
Prepare recorder IDE2410 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 2 to 2:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 528142336

PM 05:13:28 #9 Text 0 File ThreadedTransferInterface.cpp, Line 842
Removed 2 run-out blocks from end of track 2.

PM 05:13:28 #10 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 257732 (257732) = #257732/57:16.32
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 257730 blocks [IDE2410 ]
--------------------------------------------------------------

PM 05:13:28 #11 Phase 24 File dlgbrnst.cpp, Line 1436
Caching of files started

PM 05:13:43 #12 Phase 25 File dlgbrnst.cpp, Line 1436
Caching of files completed

PM 05:13:43 #13 Phase 36 File dlgbrnst.cpp, Line 1436
Burn process started at 10x (1,500 KB/s)

PM 05:13:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1940
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #19745

PM 05:13:43 #15 Text 0 File Mmc.cpp, Line 14839
Set BUFE: supported -> ON , JSpeed

PM 05:14:21 #16 SCSI -1135 File Cdrdrv.cpp, Line 1366
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03CAE66C
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x7D 0xB0 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

PM 05:14:21 #17 mmc -1135 File Writer.cpp, Line 308
Write error

PM 05:14:21 #18 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

PM 05:14:21 #19 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader

PM 05:14:21 #20 CDR -201 File WriterStatus.cpp, Line 183
Invalid writestate

PM 05:14:21 #21 TRANSFER -18 File WriterStatus.cpp, Line 183
Could not perform EndTrack

PM 05:14:21 #22 SCSI -1176 File Cdrdrv.cpp, Line 1162
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03

PM 05:14:21 #23 mmc -1176 File WriterStatus.cpp, Line 222
Session fixation error

PM 05:14:21 #24 TRANSFER -19 File WriterStatus.cpp, Line 222
Could not perform Fixation

PM 05:14:21 #25 Text 0 File WriterStatus.cpp, Line 231
falling back to disc fixation

PM 05:14:21 #26 SCSI -1176 File Cdrdrv.cpp, Line 1162
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03

PM 05:14:21 #27 mmc -1176 File WriterStatus.cpp, Line 222
Session fixation error

PM 05:14:21 #28 TRANSFER -19 File WriterStatus.cpp, Line 222
Could not perform Fixation

PM 05:14:21 #29 Phase 38 File dlgbrnst.cpp, Line 1436
Burn process failed at 10x (1,500 KB/s)

PM 05:14:21 #30 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 1999/5/5 PM 10:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 2002/7/13 PM 01:34:26
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 1999/5/5 PM 10:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 1999/5/5 PM 10:22:00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 1999/5/5 PM 10:22:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 1999/5/5 PM 10:22:00

[Marko]

樓上的老兄:
看你的log檔,你的dma沒開,緩衝區不穩是一定ㄉ,
請你先裝IDE BusMaster再開dma!!

[MIMIWIN1020]

請問我是否該先確認我主機板上的晶片嗎?也就是安裝IDE驅動程式需確認主機板哪個晶片的型號?再去開DMA嗎?我的主機板是微星K7 TRUBO 3BAT的。還有謝謝你的指導。