以下是兩篇刊在CD-Freaks的版主文章，有極豐富的資訊(含相關連結)，可讀性極高。建議將之"完整"下載備份。
CloneCD Settings
Clone - Down & Dirty Pt 1
(Clone - Down & Dirty Pt 1，以後應會有Part 2吧!)
另外，對於使用一些讀取SafeDisc/SafeDisc2很慢(由於在讀取其中的邏輯壞磁區時所引起)來源機的朋友，Daemon Tools提供一輔助的方法"fastdump"，請參考：
DAEMON Tools' "fastdump" feature is used to speed up the image creation of Safedisc 1 & 2 protected CDs and is also the first step to create a backup of a Safedisc 2 protected CD.
To use this feature you will first have to make sure the DAEMON Manager is running with ENABLED safedisc emulation (that's very important!!)! Now install the CD you want to copy. Run the CD setup and select the desired install size and options. Afterwards start the application from the original CD, make sure the Safedisc CD verification is over and then exit the application. Do NOT remove the original CD from the CDROM/DVDROM drive you installed from. Now run your burning program and use the general settings for extracting a safedisc protected CD (get the correct settings for most burning progs under "Instructions" on our homepage). Now start the image creation in your burning program. You will notice the errors at the beginning of the CD (usual for safedisc protection) are counted up in about 10 seconds and then the extraction continues like normal. The resulting image will work the same as if you extracted it without the help of DAEMON Tools' Fastdump feature. You can use this image to mount it with DAEMON Tools' virtual STEALTH DVDROM or burn it to a CD.
Please note that this feature ONLY WORKS WITH SAFEDISC PROTECTED CDs!!! Other CDs using "unreadable sectors" can't be extracted faster!!
Using the feature described above you can also produce a perfect copy (if you have recorder being able to do so, of course!!) from an "unperfect" 1:1 copy without the errors at the beginning of the CD (maybe an older copy you made before CloneCD or Blindread/-write supported your recorder)! It works exactly the same as above. Install the game from your copy, run the game, close it, start your burning program with enabled safedisc emulation and extract the CD using the correct settings. Afterwards burn the image!
NOTES:
1.to extract you must have the CD in the SAME drive you started the game from!
2.for older safedisc protected games the Fastdump feature may even work without installing the game. Just start the extraction with enabled safedisc emulation.
 |
回覆時引用此文章
書籤