-
CloneCD及防拷備份必讀
以下是兩篇刊在CD-Freaks的版主文章，有極豐富的資訊(含相關連結)，可讀性極高。建議將之"完整"下載備份。
[url="http://www.cdfreaks.com/forum/showthread.php?s=&threadid=41896"]CloneCD Settings[/url]
[url="http://www.cdfreaks.com/forum/showthread.php?s=&threadid=41618"]Clone - Down & Dirty Pt 1[/url]
(Clone - Down & Dirty Pt 1，以後應會有Part 2吧!)
另外，對於使用一些讀取SafeDisc/SafeDisc2很慢(由於在讀取其中的邏輯壞磁區時所引起)來源機的朋友，Daemon Tools提供一輔助的方法[url="http://www.daemon-tools.com/daemon.htm#features"]"fastdump"[/url]，請參考：
DAEMON Tools' "fastdump" feature is used to speed up the image creation of Safedisc 1 & 2 protected CDs and is also the first step to create a backup of a Safedisc 2 protected CD.
To use this feature you will first have to make sure the DAEMON Manager is running with ENABLED safedisc emulation (that's very important!!)! Now install the CD you want to copy. Run the CD setup and select the desired install size and options. Afterwards start the application from the original CD, make sure the Safedisc CD verification is over and then exit the application. Do NOT remove the original CD from the CDROM/DVDROM drive you installed from. Now run your burning program and use the general settings for extracting a safedisc protected CD (get the correct settings for most burning progs under "Instructions" on our homepage). Now start the image creation in your burning program. You will notice the errors at the beginning of the CD (usual for safedisc protection) are counted up in about 10 seconds and then the extraction continues like normal. The resulting image will work the same as if you extracted it without the help of DAEMON Tools' Fastdump feature. You can use this image to mount it with DAEMON Tools' virtual STEALTH DVDROM or burn it to a CD.
Please note that this feature ONLY WORKS WITH SAFEDISC PROTECTED CDs!!! Other CDs using "unreadable sectors" can't be extracted faster!!
Using the feature described above you can also produce a perfect copy (if you have recorder being able to do so, of course!!) from an "unperfect" 1:1 copy without the errors at the beginning of the CD (maybe an older copy you made before CloneCD or Blindread/-write supported your recorder)! It works exactly the same as above. Install the game from your copy, run the game, close it, start your burning program with enabled safedisc emulation and extract the CD using the correct settings. Afterwards burn the image!
NOTES:
1.to extract you must have the CD in the SAME drive you started the game from!
2.for older safedisc protected games the Fastdump feature may even work without installing the game. Just start the extraction with enabled safedisc emulation.
-
-
[QUOTE][i]最初由 饅頭 發表[/i]
[B]英文的看不董~~不過感謝你的告知啦!!~ [/B][/QUOTE]
分開看每個字母我都認識…合起來看每個句子都不認識我…:p
-
多謝 jess板主 的告知！
大致上看過一遍了，不過小弟會再找一天完整讀一次....
-
-
-
[QUOTE][i]最初由 anne99 發表[/i]
[B]
分開看每個字母我都認識…合起來看每個句子都不認識我…:p [/B][/QUOTE]
呵呵...我跟你有一樣...
身有同感ㄟ....
-
呵
請大家重視第二國語言學習囉..
如果台灣話也有字要學的話
相信大家一定駕輕就熟的囉
-
又到了翻譯時間啦~小弟我高3生活太閒了...
"fastdump" 是用來加速備份safedisc保護光碟，且是備份safedisc2的第一步
(或第一個推出的sd2複製...anyway，反正就是要用就對了)
想使用這個功能，首先要執行DAEMON，且把safedisc模擬的功能打開，<這是一定要的>
然後放入原版CD並安裝，裝完就可以執行程式了(或遊戲:D:D:D)
等到你確定已經通過SD的檢查步驟後就直接離開，過程中不要把你的CD拿出來
下一步~燒吧! 用你習慣的燒錄程式搭配燒SD的選項，不懂就參考他們站
備份開始之後應該會出現錯誤<通常是SD的關係>，約十秒之後備份照舊進行
備份結束後的這個檔案就可以算是完整備份了
完成之後的檔案你可以用DAEMON的SD模擬執行，或是乾脆燒到CD上面
不過要注意，這個功能只對SD保護有效，對於其他的保護方式並不能提昇速度
這是第一段，不過那兩個連結我上不去，SO....
下一段比較不重要，就如同我上面寫的步驟一樣：
放CD，安裝，執行，離開程式，複製...OK!
只是他還強調能把不完美的複製品變成真正的1比1複製
(前提要你是用特殊機來讀CD)
-
