| 會員 ![]() | 呃∼真的沒有人知道裡面選項所代表的意義嗎? 我目前把VCool、RamIdle移除, 把主機板設定調為安全選項, 還是會死當耶! 難道是硬體的問題嗎? 小弟再列出自已電腦上的配備給大家參考, 真的希望有人能幫助我解決win2000死當的問題, 拜託… (這幾次測試都是用3Dmark2001 SE版, 跑預設選項會當機…, 之前是玩榮譽勳章常常死當, 個人推斷是跑3D模試的問題…) -- AMD authon 1G 勝創 256 PC-150 陞技 KT7 ASUS V3800 TNT2 ULTRA 創巨 LIVE(散裝) 聯強網路卡 YAMAHA KHS 52X CD-ROM IBM DTLA 307030硬碟 |
| 回覆 |
| 會員 ![]() | 可以把這軟體MAIL給我嗎 我剛有抓但不能用耶 |
| 回覆 |
| 會員 ![]() | 引用:
放不上來… 建議你直接上軟體王去找, 應該就可以用了! | |
| 回覆 |
| 進階會員 | |
| 回覆 |
| 會員 ![]() | 給你參考 我是VIA-KT133a的晶片主機板 安裝VCOOL後,沒有設定他的選項,都用預設值 |
| 回覆 |
| 她不是我.. ![]() | NEW BETA - 1.8 Beta 9: "official" KT333 support, display temps as mini windows, smooth throttling, beep temp, etc. http://vcool.occludo.net/vc_beta.html Installation Windows 98 and Me only (manual installation) Simply download this beta archive and extract the executable (VCool.exe) to a folder of your choice. To run VCool double-click on Vcool.exe. Windows NT, 2000, XP Then download the beta archive and put executable (VCool.exe) into a folder of your choice - if you're upgrading from 1.7.2 replace the old executable. Copy the driver (vcool.sys) into the system32 folder, e.g. c:\winnt\system32 - (replacing the one of 1.7.2 if present). Use Loaddriver.exe (part of the beta archive) to install the new driver, i.e. enter the full path to vcool.sys (including the file name) and press install and start. Note: If you had 1.7.2 (or any of the betas) installed before, you can skip this step - just stop and (re-)start the driver ot simply reboot. |
| 回覆 |
| 最愛薰 | 引用:
以下是我VCool的設定,你可以參考看看.我用起來沒什麼問題. 我的CPU AMD D800.勝創 256 PC-150*2.M/B:Giga 7ZXR-C(VIA KT133A chip) | |
| 回覆 |
| 莫道君行早 ![]() | 回覆: 回覆: 【求助】關於VCool降溫軟體… 引用:
請問一下 Enable idle Loop 有沒有法子自動鉤選,不用手動的? | |
| 回覆 |
| XML | RSS 2.0 | RSS |
本論壇所有文章僅代表留言者個人意見,並不代表本站之立場,討論區以「即時留言」方式運作,故無法完全監察所有即時留言,若您發現文章可能有異議,請 email :[email protected] 處理。