WebSphereMania | 作業系統安裝順序錯誤的問題描述與解決辦法 雖然根據以上所列的微軟幾篇文章,安裝多重微軟作業系統時有一定的順序,但是有時候有人會忘了以上的原則或是個人疏忽之下,在已經安裝 Windows NT/2000/XP/Server 2003 的電腦環境中再安裝 Win95/98/Me or DOS,或是先安裝 Windows 2000/XP 再安裝 Windows NT 等動作,此時要讓它可以雙重或多重開機,小弟建議大家看以下文章的處理方式: Warning SU0015 Setup detected a Windows NT file system partition on your hard disk. Files on this partition will not be available when you use Windows 95 (or Windows 98). Windows 2000 R1:Repair the existing installation R2:Emergency repair process F:Fast repair M:Manual repair
參考資料
Windows 2000/XP/Server 2003 Related
參考資料
|
WebSphereMania | Windows NT 4.0 FTDisk 和 Windows XP/Server 2003 不相容 Windows NT 4.0 有 Volume Sets, Stripe Sets 及 Mirror Sets, Stripe Sets with parity。在 Windows 2000 必須是動態磁碟(Dynamic Disk)才能設定 Spanned Volume, Stripe Volume 及 Mirrored Volumes, RAID-5 Volumes,但是在 Windows 2000 仍能正常顯示與存取 Windows NT 4.0 的 FT Disk Sets,雖然使用上有其限制。 但是在 Windows XP 及 Windows Server 2003 上頭就不是這麼回事了,Windows NT 4.0 的 FT Disk Sets 在 Disk Management 中會顯示為 Healthy (Unknown Partition)。 當然還是有解決辦法,不過是暫時性的。先使用 mountvol 指令列出 FT Disk Sets 的 driver letters,然後利用 FTOnline 指令,讓這些 FT Disk Sets 可以上線使用,只是,每次開機都要執行一次,甚為麻煩。 至於在 FT Disk Sets 上面設定的分享(Share),在 FTOnline 之後上不能使用,需要重新 Restart Server Service 或是在 Command Line 下以下指令: net stop dfs net stop browser net stop server net start server net start browser net start dfs 之後才能正常分享。 根本解決之道,還是備份 FT Disk Sets 上面的資料,刪除 FT Disk Sets,並以 FT Disk Volume 來重建。 參考資料
|
WebSphereMania | 其它 Boot.ini - 直接編輯 - Recovery Console 的 fixboot 指令(Windows 2000/XP/Server 2003) - Recovery Console 的 bootcfg 指令(Windows XP/Server 2003) - 直接使用 bootcfg 指令(Windows XP/Server 2003) 參考資料
Bootsect.dos 毀損時的處理 - 從 Backup 的檔案 Copy 出來。 - 重新建立。 參考資料
字集顯示問題 - 刪除 bootfont.ini - Copy DBCS 的 ntldr / ntdetect.com。 參考資料 |
XML | RSS 2.0 | RSS |
本論壇所有文章僅代表留言者個人意見,並不代表本站之立場,討論區以「即時留言」方式運作,故無法完全監察所有即時留言,若您發現文章可能有異議,請 email :[email protected] 處理。