我要光纖到府 | 引用:
如果是硬撥,PC端之MTU應設為1500,若不是可能為網路狀況之差異,或是其他因素,小弟自己測試的結果1454和1492在我的電腦上是1454勝出,但差異並沒有到30KB/sec之多 。大約只有幾KB差異,差到30KB/Sec很有可能是網路狀況影響。 感謝您的測試分享 | |
回覆 |
會員 | 引用:
回家再測試看看1500,1492及1454間的差異 thanks. | |
回覆 |
文心雕龍 | |
回覆 |
我要光纖到府 | 引用:
| |
回覆 |
會員 | 請問一下~ 是不是1454都適合每個人使用呢? 我有點搞不清楚@@~有點笨 |
回覆 |
超級初心者 | 那如果是分享器後面呢?? 算是pppoe還是? |
回覆 |
文心雕龍 | 引用:
我改成其他數值(ex:1450)後他還是顯示建議1480 而且我測過大約在1480左右的MTU是我PING 168.95.1.1 加上不同封包大小後可以得到最佳的反應時間說(1490以上都會TIME OUT) | |
回覆 |
我要光纖到府 | 引用:
| |
回覆 |
我要光纖到府 | 引用:
| |
回覆 |
我要光纖到府 | 引用:
The SG TCP/IP Analyzer is a server-side program designed to display your Internet connection parameters, extracted directly from your TCP packets sent to our server. The server part of the TCP Analyzer is a specialized web server. It doesn't really serve different web pages, rather it responds to all requests with the same page, the content of which is modified depending on the TCP settings of the requesting client. It then transfers control to a PHP script that does the actual analysis and displays the results. 這個Analyzer純粹是讀出您設定的數值(建議值是寫在MTU = XXX的下面那一行),若是更改後他仍然顯示1480表示您更改的數值並未生效(未重新開機、更改位置錯誤等..)。 | |
回覆 |
XML | RSS 2.0 | RSS |
本論壇所有文章僅代表留言者個人意見,並不代表本站之立場,討論區以「即時留言」方式運作,故無法完全監察所有即時留言,若您發現文章可能有異議,請 email :[email protected] 處理。