Watch Dog | ======= Debug Command Listing ======= AT just answer OK ATHE print help ATBAx change baudrate. 1:38.4k, 2:19.2k, 3:9.6k 4:57.6k 5:115.2k ATENx,(y) set BootExtension Debug Flag (y=password) ATSE show the seed of password generator ATTI(h,m,s) change system time to hour:min:sec or show current time ATDA(y,m,d) change system date to year/month/day or show current date ATDS dump RAS stack ATDT dump Boot Module Common Area ATDUx,y dump memory contents from address x for length y ATRBx display the 8-bit value of address x ATRWx display the 16-bit value of address x ATRLx display the 32-bit value of address x ATGO(x) run program at addr x or boot router ATGR boot router ATGT run Hardware Test Program ATRTw,x,y(,z) RAM test level w, from address x to y (z iterations) ATSH dump manufacturer related data in ROM ATDOx,y download from address x for length y to PC via XMODEM ATTD download router configuration to PC via XMODEM ATUR upload router firmware to flash ROM ATLC upload router configuration file to flash ROM ATXSx xmodem select: x=0: CRC mode(default); x=1: checksum mode ATWBx,y write address x with 8-bit value y ATWWx,y write address x with 16-bit value y ATWLx,y write address x with 32-bit value y AT%Tx enable Hardware Test Program at boot up ATBTx block write enable (1=enable , other=disable) ATWEa(,b,c,d) write MAC addr, Country code, EngDbgFlag, Featurebit to flash rom ATCUx write country code to flash rom ATCB copy from FLASH ROM to working buffer ATCL clear working buffer ATSB save working buffer to FLASH ROM ATBU dump manufacturer related data in rom ATWMx set MAC address in working buffer ATCOx set Country code in working buffer ATFLx set EngDebugFlag in working buffer ATSTx set ROMRAS address in working buffer ATSYx set system type in working buffer ATVDx set vendor name in working buffer ATPNx set product name in working buffer ATFEx,y,... set feature bits in working buffer ATMP check & dump memMap TAB ATUPx,y upload to ram address x for length y from PC in xmodem ATUXx(,y) xmodem upload from flashblock x to y ATERx,y erase flash rom from block x to y ATWFx,y,z copy data from address x to flash addr y , length z ATLOa,b,c,d Ent/Trap Log Cmd 以上 AT 指令是我從 P642R51.BIN & P642R61.BIN 中挖出來的, 有興趣的網友請參考 |
回覆 |
|
類似的主題 | ||||
主題 | 主題作者 | 討論版 | 回覆 | 最後發表 |
關於燒錄機與CloneCD4.0.0.1 & SD2.51,2.6 | zog | -- 光 碟 燒 錄 討 論 版 | 3 | 2002-05-19 11:14 PM |
中華電信 P642R-51 北區第六批韌體及設定檔... | ivanwu | ---- ADSL 軟 硬 體 技 術 | 2 | 2002-02-26 11:35 PM |
"P642R-61" ADSL over PSTN router (with TI ADSL chipset) | Lettuce | ---- ADSL 軟 硬 體 技 術 | 4 | 2001-05-23 09:38 PM |
關於 command mode & debug mode | simonyang | ---- ADSL 軟 硬 體 技 術 | 2 | 2001-03-28 05:50 PM |
XML | RSS 2.0 | RSS |
本論壇所有文章僅代表留言者個人意見,並不代表本站之立場,討論區以「即時留言」方式運作,故無法完全監察所有即時留言,若您發現文章可能有異議,請 email :[email protected] 處理。