會員 | 【問題】有關ADSL model中的訊息? 開啟 : http://192.168.1.1 點入Diagnostics 其中的TEST ATM 0AM F5 segment ping出現FAIL , 有要緊嗎? 如圖 : http://homepage8.seed.net.tw/web@3/s...7-TEST-ATM.JPG 謝謝指教!! |
回覆 |
會員 | 回覆: 【問題】有關ADSL model中的訊息? 你沒有開硬體撥接出現這樣算正常吧 數據機不知怎麼上網,有開硬體撥接應該會是下面的結果 HiNet Diagnostics Your modem is capable of testing your DSL connection. The individual tests are listed below. If a test displays a fail status, click "Rerun Diagnostic Tests" at the bottom of this page to make sure the fail status is consistent. If the test continues to fail, click "Help" and follow the troubleshooting procedures. Test the connection to your local network Test your Ethernet Connection: PASS Help Test the connection to your DSL service provider Test ADSL Synchronization: PASS Help Test ATM OAM F5 segment ping: PASS Help Test ATM OAM F5 end-to-end ping: PASS Help Test the connection to your Internet service provider Test PPP server connection: PASS Help Test authentication with ISP: PASS Help Test the assigned IP address: PASS Help Ping default gateway: PASS Help Ping primary Domain Name Server: PASS Help |
回覆 |
會員 | 回覆: 【問題】有關ADSL model中的訊息? 那麼就是沒有改硬撥 , 用PPPOE撥接 , 那Test ATM OAM F5 segment ping FAIL , 是正常囉@@" ps : 我的ADSL modem是AR4031B(沒改硬撥) , 目前還是用XP的PPPOE撥接上網 |
回覆 |
|
XML | RSS 2.0 | RSS |
本論壇所有文章僅代表留言者個人意見,並不代表本站之立場,討論區以「即時留言」方式運作,故無法完全監察所有即時留言,若您發現文章可能有異議,請 email :[email protected] 處理。