有時候燒完片會停在"正在導出"...
然後燒錄機一直每隔五秒的發出"髂...髂...髂..."的聲音...
然後把nero強制關掉,按退片扭都沒有用...
好像整個燒錄機就掛在那...
我的燒錄機是Plextor 1210ts scsi卡是Tekram DC-315/U
買來到現在發生過3次吧...買大概1年多囉...
啊對了...我是有在燒到一半的時候把磁片放進去...
我的軟碟是裝在燒錄機上面...
磁片推進去的震動倒是滿大的...
會不會是因為這個關係啊???燒的時候不能夠震動到??
順便附上燒錄失敗的訊息...
而且每次燒片完在結尾的時候都會有"髂"的一聲...
所以不知道是什麼原因嚕...
8.6.2003
CD-ROM (ISO)
上午 10:31:02 #1 Text 0 File Isodoc.cpp, Line 7050
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 2 (Max. of 31 chars)
Character set : Multibyte
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
上午 10:31:02 #2 Phase 72 File dlgbrnst.cpp, Line 1574
BURN-Proof activated
上午 10:31:02 #3 Text 0 File Reader.cpp, Line 115
Reader running
上午 10:31:02 #4 Text 0 File Writer.cpp, Line 126
Writer PLEXTOR CD-R PX-W1210S running
上午 10:31:02 #5 ISO9660GEN -11 File geniso.cpp, Line 4485
First writeable address = 0 (0x00000000)
上午 10:31:02 #6 Text 0 File Burncd.cpp, Line 3597
Turn on Disc-At-Once, using CD-R/RW media
上午 10:31:02 #7 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (original item values)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 352960 (352960) = #352960/78:26.10
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
上午 10:31:02 #8 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 352959 (78:28.09)
上午 10:31:02 #9 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE
上午 10:31:02 #10 Text 0 File DlgWaitCD.cpp, Line 1420
Recorder: PLEXTOR CD-R PX-W1210S;
CDRW code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 0F 25 (LI 97:15.37), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
上午 10:31:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 811
Prepare recorder PLEXTOR CD-R PX-W1210S for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x20 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 0 350400 824864960
上午 10:31:02 #12 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 352960 (352960) = #352960/78:26.10
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 352960 blocks [PLEXTOR CD-R PX-W1210S]
--------------------------------------------------------------
上午 10:31:02 #13 Phase 24 File dlgbrnst.cpp, Line 1574
Caching of files started
上午 10:31:02 #14 Phase 25 File dlgbrnst.cpp, Line 1574
Caching of files completed
上午 10:31:02 #15 Phase 36 File dlgbrnst.cpp, Line 1574
Burn process started at 12x (1,800 KB/s)
上午 10:31:02 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1953
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
上午 10:31:02 #17 Text 0 File Mmc.cpp, Line 12135
StartDAO : CD-Text - Off
上午 10:31:02 #18 Text 0 File Mmc.cpp, Line 16752
Set BUFE: BURN-Proof -> ON
上午 10:31:02 #19 Text 0 File Mmc.cpp, Line 12393
CueData, Len=32
41 00 00 24 00 00 00 00
41 01 00 20 00 00 00 00
41 01 01 20 00 00 02 00
41 aa 01 24 00 4e 1c 0a
上午 10:39:59 #20 SCSI -1093 File Cdrdrv.cpp, Line 1184
SCSI Exec, HA 2, TA 4, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x05 0x7D 0xB5 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
上午 10:39:59 #21 MMC -1093 File Writer.cpp, Line 334
No seek complete
上午 10:39:59 #22 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
上午 10:39:59 #23 Phase 38 File dlgbrnst.cpp, Line 1574
Burn process failed at 12x (1,800 KB/s)
上午 10:39:59 #24 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 2003/4/14 下午 01:09:35
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 2003/4/14 下午 01:09:35
File 'Drivers\trm3x5.sys': Ver=3.02, size=21504 bytes, created 1999/6/16 下午 05:26:42 (Adapter driver for rec)
File 'Drivers\atapi.sys': Ver=5.00.2195.5376, size=86704 bytes, created 2002/7/22 下午 12:05:04 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 |
回覆時引用此文章
書籤