如提,我知道FDISK,但是硬碟目前跳線是插在Enabled ,跳線要插在哪, 可以請大大幫我,還有開機片要怎麼作啊...
如提,我知道FDISK,但是硬碟目前跳線是插在Enabled ,跳線要插在哪, 可以請大大幫我,還有開機片要怎麼作啊...
請問你的型號是6Y120MO DiamondMax Plus 9 的硬碟ㄇ~
MAXTOR的硬碟都是用J50的腳位來定義master or slave
詳細資料http://www.maxtor.com/en/support/pro...us_9/index.htm
(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.
(Master with CLJ)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Slave)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.
(Slave with CLJ)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.
(Cable Select with CLJ)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
我的型號是6Y120P0-1A 120GB最初由 杯子 發表
請問你的型號是6Y120MO DiamondMax Plus 9 的硬碟ㄇ~
MAXTOR的硬碟都是用J50的腳位來定義master or slave
詳細資料http://www.maxtor.com/en/support/pro...us_9/index.htm
(Master)
The vertical jumper over the J50 pins is configuring the drive as a Master.
(Master with CLJ)
The vertical jumper over the J50 pins is configuring the drive as a Master.
The vertical jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Slave)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.
(Slave with CLJ)
No jumper is required to configure the drive as a Slave.
The jumper over the J44 and J42 positions is in the jumper storage position.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
(Cable Select)
The jumper over the J48 position is configuring the drive for Cable Select.
(Cable Select with CLJ)
The jumper over the J48 position is configuring the drive for Cable Select.
The jumper over the J46 pins is in the Cylinder Limitation position (CLJ).
書籤