【問題】我的modem不能用??

[Mr.Heart]

我是用rh7.3+gnome

我執行rh pppdialer時 modem有抓到卻不能撥?
大家幫幫我

[xiver]

很久沒用Modem了所以記不太清楚
好像要root才能撥吧...???
有錯誤得話建議看看/var/log下的messages除錯

[Mr.Heart]

最初由 xiver 發表
很久沒用Modem了所以記不太清楚
好像要root才能撥吧...???
有錯誤得話建議看看/var/log下的messages除錯

我的modem抓到不能撥
我去看 /var/log/message 內容如下

Aug 8 10:28:09 localhost ifup-ppp: Setting up a new /etc/ppp/peers/ppp0 config file
Aug 8 10:28:09 localhost ifup-ppp: pppd started for ppp0 on /dev/ttyS1 at 115200
Aug 8 10:28:10 localhost kernel: CSLIP: code copyright 1989 Regents of the University of California
Aug 8 10:28:10 localhost kernel: PPP generic driver version 2.4.2
Aug 8 10:28:10 localhost pppd[1517]: pppd 2.4.1 started by root, uid 0
Aug 8 10:28:11 localhost WvDial: WvDial: Internet dialer version 1.41
Aug 8 10:28:11 localhost WvDial: Initializing modem.
Aug 8 10:28:11 localhost WvDial: Sending: ATZ
Aug 8 10:28:11 localhost WvDial: ERROR
Aug 8 10:28:11 localhost WvDial: Bad init string.
Aug 8 10:28:11 localhost pppd[1517]: Connect script failed
Aug 8 10:28:12 localhost pppd[1517]: Exit.
Aug 8 10:28:24 localhost kernel: cdrom: This disc doesn't have any tracks I recognize!

我不是很了解，請各位大大幫幫我，謝謝

[xiver]

感覺好像是送出ATZ初始化MODEM出錯
你的應該是外接式的,建議檢查你的連接阜設定值
或改用kppp試試看

[Mr.Heart]

最初由 xiver 發表
感覺好像是送出ATZ初始化MODEM出錯
你的應該是外接式的,建議檢查你的連接阜設定值
或改用kppp試試看

連接阜設定值??要去那匑heck
kppp是gnome中的程式嗎?
請大大幫幫我
謝謝

[chienchun_chen]

最初由 Mr.Heart 發表

連接阜設定值??要去那匑heck
kppp是gnome中的程式嗎?
請大大幫幫我
謝謝

try this way!
use the util wvdial and wvdialconf
step1:type
wvdialconf /etc/wvdial.conf
------> it creat the file in /etc (mean you must be root)
step2:type
wvdial
------> will scan you all com port include COM3 and COM4 etc....,and show you the modem status.....
step3:vi /etc/wvdial.conf
modify the PHONE NUMBER to your ISP TEL
and ID , Passwd
step4:/sbin/ifup ppp0
to start pppd ,will start to connect
step5pen a termianl to ping somewhere ip,If not,setup you RH7.3 net-config(seem to Control panel )
Good luck!

[xiver]

按照上面網友的方法試試看吧
因為我以前是用chat script + pppd的方式撥的
wvdial沒用過
kppp是kde中的一個撥接程式,開命令視窗打kppp,應該就找的到,除非你沒裝
最後注意你的modem接到的是com1,or com2
檢查pppdialer中類似/dev/ttyS0 or /dev/modem
modem應該是link到你接modem的那一個串列阜
com1 = ttyS0
com2 = ttyS1

[Mr.Heart]

請問高手們

用vi 修改完文件後
要如何存檔阿

謝謝

[xiver]

按 :
打wq

[Mr.Heart]

最初由 chienchun_chen 發表


try this way!
use the util wvdial and wvdialconf
step1:type
wvdialconf /etc/wvdial.conf
------> it creat the file in /etc (mean you must be root)
step2:type
wvdial
------> will scan you all com port include COM3 and COM4 etc....,and show you the modem status.....
step3:vi /etc/wvdial.conf
modify the PHONE NUMBER to your ISP TEL
and ID , Passwd
step4:/sbin/ifup ppp0
to start pppd ,will start to connect
step5pen a termianl to ping somewhere ip,If not,setup you RH7.3 net-config(seem to Control panel )
Good luck!

我照上面的方法試了一次
結果，wvdial說沒有偵測到任何的modem
可是我在winxp下modem裝在com2(ttsy1)就可以正常的使用
請各位高手幫幫我吧
我的modem是 ADI哈網族