【問題】拜託拜託可以幫我看看嗎 我老是燒路失敗 拜託了 內附圖

[rz600000]

如提所說 我老是燒錄失敗 常會出現以上的訊息是為什麼呢
而且更怪的是 最下面一排顯示燒錄進度的圖示 常常有在跑 跑了不久
就會出現以上的訊息 可是拿出來片子 卻一點燒的痕跡也沒有
~~~~~~~~~~~~~~~~~
燒路機 顯示出 已經有燒路進去的資料 已經有跑了一段時間 但卻沒有燒錄痕跡是為什麼

而且 那片片子 還可以據續使用 就像是新的一樣 好像沒燒過一樣
就這樣有人可以為我解答嗎

[Asa]

我也一樣.......
我的燒錄機是RICHO 7240 /40R24W10RW用的也是NERO
跟你的狀況一樣,有時候跑的燒錄完才出現這個畫面,而且燒錄可能跑了快1個小時...
也一樣空片空空如也,有時候可以燒,有時候不可以燒

這是我唯一的一台IDE介面燒錄機,不知道跟這個有沒有關係.........

[rz600000]

難道沒有人知道這到底是怎麼回事嗎qq"~

[傳說]

到理銘網站下載新軔體試試吧...

[Marko]

1.2樓的
你們都安裝過IDE晶片組驅動程式嗎?

[rz600000]

啥米是ide 晶片驅動程式 是買主機板送的那張驅動程式嗎 我全裝了 還是別的
請多指教

[deave]

嗯...剛好我碰到我朋友一樣的問題...
也剛好是同一台的樣子...
又剛好我把他的錯誤訊息拿出來給大家看看...


Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 1999/5/5 PM 10:22:00
Nero Version: 5.5.5.1
Recorder: <RICOH CD-R/RW MP7240A> Version: 2.02 - HA 1 TA 1 - 5.5.5.1
Adapter driver: <ESDI_506
> HA 1
Drive buffer : 2048kB
CD-ROM: <Copystar FANTOM DVDROM> Version: 1.0g - HA 0 TA 0 - 5.5.5.1
Adapter driver: <copystar> HA 0
RICOH CD-R/RW MP7240A (Target 1, E: Autoinsert Off, DMA Off, Disconnect On, SyncDataXfer Off
Copystar FANTOM DVDROM (Target 0, G: Autoinsert On, DMA ?, Disconnect On, SyncDataXfer Off
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261584kB)
Free physical memory: 76MB (78784kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD-ROM (ISO)
31.7.2002

PM 09:22:16 #1 Phase 75 File dlgbrnst.cpp, Line 1426
JustLink activated

PM 09:22:16 #2 Text 0 File Reader.cpp, Line 117
Reader running

PM 09:22:16 #3 Text 0 File Writer.cpp, Line 122
Writer CD-R/RW MP7240A running

PM 09:22:17 #4 ISO9660GEN -11 File geniso.cpp, Line 4226
First writeable address = 0 (0x00000000)

PM 09:22:17 #5 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 98984 (98984) = #98984/21:59.59
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

PM 09:22:18 #6 Text 0 File DlgWaitCD.cpp, Line 1199
Recorder: RICOH CD-R/RW MP7240A;
CDR code: 00 97 27 06; OSJ entry from: DIGITAL STORAGE TECHNOLOGY CO.,LTD
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1B 06 (LI 97:27.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

PM 09:22:20 #7 Text 0 File ThreadedTransferInterface.cpp, Line 803
Prepare recorder CD-R/RW MP7240A for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 203026432

PM 09:22:20 #8 Text 0 File ThreadedTransferInterface.cpp, Line 831
Removed 2 run-out blocks from end of track 1.

PM 09:22:20 #9 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 98984 (98984) = #98984/21:59.59
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 98982 blocks [CD-R/RW MP7240A ]
--------------------------------------------------------------

PM 09:22:20 #10 Phase 24 File dlgbrnst.cpp, Line 1426
Caching of files started

PM 09:22:20 #11 Phase 25 File dlgbrnst.cpp, Line 1426
Caching of files completed

PM 09:22:20 #12 Phase 36 File dlgbrnst.cpp, Line 1426
Burn process started at 24x (3600 KB/s)

PM 09:22:20 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1844
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

PM 09:22:20 #14 Text 0 File Mmc.cpp, Line 14392
Set BUFE: JustLink -> ON , JustSpeed : On

PM 09:22:36 #15 SCSI -1152 File Cdrdrv.cpp, Line 1325
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x037562C8
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0

PM 09:22:36 #16 mmc -1152 File Writer.cpp, Line 308
Medium speed error

PM 09:22:36 #17 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

PM 09:22:36 #18 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader

PM 09:22:36 #19 CDR -201 File WriterStatus.cpp, Line 183
Invalid writestate

PM 09:22:36 #20 TRANSFER -18 File WriterStatus.cpp, Line 183
Could not perform EndTrack

PM 09:22:38 #21 Phase 38 File dlgbrnst.cpp, Line 1426
Burn process failed at 24x (3600 KB/s)

PM 09:22:38 #22 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 1999/5/5 PM 10:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 10, size=37493 bytes, created 2002/7/9 PM 04:43:10
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 1999/5/5 PM 10:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 1999/5/5 PM 10:22:00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 1999/5/5 PM 10:22:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 1999/5/5 PM 10:22:00

所以，也許真的要去抓ide晶片組驅動程式吧...我也不確定...試試看...
但是這問題還沒發生前，是確定有燒過，也有成功過的...

[cdx]

換好一點的片或是降速一定能有所幫助
我的PHIHIPS也是有過上面的情形
大概是功率不夠應付爛片吧

[tototo]

換一套燒錄軟體看看吧！

[Marko]

最初由 deave 發表
嗯...剛好我碰到我朋友一樣的問題...
也剛好是同一台的樣子...
又剛好我把他的錯誤訊息拿出來給大家看看...


Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 1999/5/5 PM 10:22:00
Nero Version: 5.5.5.1
Recorder: <RICOH CD-R/RW MP7240A> Version: 2.02 - HA 1 TA 1 - 5.5.5.1
Adapter driver: <ESDI_506
> HA 1
Drive buffer : 2048kB
CD-ROM: <Copystar FANTOM DVDROM> Version: 1.0g - HA 0 TA 0 - 5.5.5.1
Adapter driver: <copystar> HA 0
RICOH CD-R/RW MP7240A (Target 1, E: Autoinsert Off, DMA Off, Disconnect On, SyncDataXfer Off
Copystar FANTOM DVDROM (Target 0, G: Autoinsert On, DMA ?, Disconnect On, SyncDataXfer Off
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261584kB)
Free physical memory: 76MB (78784kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry: 1
Wizard: Off

CD-ROM (ISO)
31.7.2002

PM 09:22:16 #1 Phase 75 File dlgbrnst.cpp, Line 1426
JustLink activated

PM 09:22:16 #2 Text 0 File Reader.cpp, Line 117
Reader running

PM 09:22:16 #3 Text 0 File Writer.cpp, Line 122
Writer CD-R/RW MP7240A running

PM 09:22:17 #4 ISO9660GEN -11 File geniso.cpp, Line 4226
First writeable address = 0 (0x00000000)

PM 09:22:17 #5 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 98984 (98984) = #98984/21:59.59
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

PM 09:22:18 #6 Text 0 File DlgWaitCD.cpp, Line 1199
Recorder: RICOH CD-R/RW MP7240A;
CDR code: 00 97 27 06; OSJ entry from: DIGITAL STORAGE TECHNOLOGY CO.,LTD
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1B 06 (LI 97:27.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

PM 09:22:20 #7 Text 0 File ThreadedTransferInterface.cpp, Line 803
Prepare recorder CD-R/RW MP7240A for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 203026432

PM 09:22:20 #8 Text 0 File ThreadedTransferInterface.cpp, Line 831
Removed 2 run-out blocks from end of track 1.

PM 09:22:20 #9 Text 0 File ThreadedTransferInterface.cpp, Line 668
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 98984 (98984) = #98984/21:59.59
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 98982 blocks [CD-R/RW MP7240A ]
--------------------------------------------------------------

PM 09:22:20 #10 Phase 24 File dlgbrnst.cpp, Line 1426
Caching of files started

PM 09:22:20 #11 Phase 25 File dlgbrnst.cpp, Line 1426
Caching of files completed

PM 09:22:20 #12 Phase 36 File dlgbrnst.cpp, Line 1426
Burn process started at 24x (3600 KB/s)

PM 09:22:20 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1844
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

PM 09:22:20 #14 Text 0 File Mmc.cpp, Line 14392
Set BUFE: JustLink -> ON , JustSpeed : On

PM 09:22:36 #15 SCSI -1152 File Cdrdrv.cpp, Line 1325
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x037562C8
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0

PM 09:22:36 #16 mmc -1152 File Writer.cpp, Line 308
Medium speed error

PM 09:22:36 #17 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion

PM 09:22:36 #18 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader

PM 09:22:36 #19 CDR -201 File WriterStatus.cpp, Line 183
Invalid writestate

PM 09:22:36 #20 TRANSFER -18 File WriterStatus.cpp, Line 183
Could not perform EndTrack

PM 09:22:38 #21 Phase 38 File dlgbrnst.cpp, Line 1426
Burn process failed at 24x (3600 KB/s)

PM 09:22:38 #22 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 1999/5/5 PM 10:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 10, size=37493 bytes, created 2002/7/9 PM 04:43:10
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 1999/5/5 PM 10:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 1999/5/5 PM 10:22:00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 1999/5/5 PM 10:22:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 1999/5/5 PM 10:22:00

所以，也許真的要去抓ide晶片組驅動程式吧...我也不確定...試試看...
但是這問題還沒發生前，是確定有燒過，也有成功過的...

看了一下...你燒錄器DMA沒開...多半一定沒裝IDE驅動程式...還有..
你這錯誤訊息應是Medium Speed Error,換一個片子試試看...