請教一下
1.直接燒錄映像檔和 使用daemon讀映像檔,再將虛擬光碟機中的資料完全燒錄,其結果會不一樣嗎?
2.在daemon中 "模擬"有safedisk.securom.laserlok三個選項是幹什麼的,要如何使用?
還請知道的前輩不吝指導或告知何處可找相關資料,謝謝!!!
請教一下
1.直接燒錄映像檔和 使用daemon讀映像檔,再將虛擬光碟機中的資料完全燒錄,其結果會不一樣嗎?
2.在daemon中 "模擬"有safedisk.securom.laserlok三個選項是幹什麼的,要如何使用?
還請知道的前輩不吝指導或告知何處可找相關資料,謝謝!!!
1.針對檔案而言是相同的,但如果映像檔中有特殊格式或內容就完全
不同了,因為那些絕大部分非得用光碟對燒或映像檔還原才能被燒錄進去
2.主要用途原設計是讓你不論任何的光碟保護都讓你能PASS過去,
不過大概都被拿來當作遊戲或程式的光碟保護破解方式之一吧
1.There is no difference to burn the image in both ways.
2.The simulations work only for the 3 types of CD protection "safedisk(safedisc 2), securom(new securom), laserlok", but not others.
1.有的會一樣有的會不一樣,不一樣的地方是用特殊燒錄機,燒錄有
SafeDisc2與NEW SecuROM保護的片,燒錄當然成功
一樣的地方是一般燒錄機,燒錄有SafeDisc2與NEW SecuROM保護的片,當然不成功,使用daemon讀映像檔,再將虛擬光碟機中的資料完全燒錄,當然也不成功,因為daemon它是模擬程式不是破解程式
2.在daemon中 "模擬"有safedisk.securom.laserlok三個選項是幹什麼的,假如不知到自己的光碟片是safedisk.securom.laserlok保護,你就三種全選擇就可以了,可以避開比對母片
3.是要靠自己實際測試
1. "There is no difference." No matter what you use a special recorder or not, the result is the same.
2. Once you enable Daemon, no matter whether you do or do not make any or all the choice of the 3 emulation modes, the program do it automatically.
那麼就是說我的映像檔都可以用此種方式燒錄囉!?(sorry!英文不大好!)會有這種問題主要是因為一張光碟內不想祇燒一個映像檔而已,謝謝前輩們指導!!
書籤