無法安裝XP

[by073828]

我灌XP重新開機之後就一直停在黑黑的畫面!!
就算只安裝一顆硬碟還是沒用.xp的光碟機開機也是沒用.
根本沒安裝完成第一次重新開機的時候就一直卡在黑黑的畫面.
電腦配備
cpu:amd athlon 1.4g
m/b:abit k7ta-r
hd:2顆 (ibm 10.1g seagate 40g)
cdrom:三台 (teac540e.pioneer dvd115.teaccdr58s)
其他配備 yamaha音效卡.scsi卡
目前的系統為win me
請各位幫幫忙!!mail:[email protected]

[ghost1978]

我猜你無法安裝是因為你的設備太多
試著把你的設備先拆掉只剩一顆硬碟一台光碟積及一片顯示卡其餘的設備
等XP安裝完成後再裝回去

[jerrys123]

嗯...我想你的顯示卡大概是用Geforce mx200吧?
目前我測過的xp安裝重開沒畫面
只有遇到顯示卡的軔體不支援xp這一項
我建議你先將顯示卡的軔體更新到最新的版本
然後再灌
這樣應該就沒問題了

我用xp pro
主機板KT7A
TB 1G
Samsung 256單面顆粒
IBM 40G、Maxtor 2G(備份用)
IDE 48X CD-ROM、4W CD-R
SCSI 40X CD-ROM、8X CD-R
Advansys 2930c SCSI卡
DOMEX IEEE1394卡
ATI Radeon 7500 VGA(之前是用ELSA Geforce2 mx200遇到你說的問題)
USB 4個Port接滿了
音效卡 Philiphs AE706
基本上可以插的都插滿了qq
還好足瓦的Aopen 250w-Fsp撐的住
沒有任何問題
xp跟2000一樣會自動指定IRQ
較不容易發生裝備衝突的情況
不過,不認識...
就是有可能的了^^
不認識顯示卡就不會跳到桌面直接黑黑一片(受害者之一)
先試試吧

[jerrys123]

補述上一篇
對於某些顯示卡軔體不支援XP
我本人已跟ELSA工程師討論過了
現在較新的顯示卡皆不需更新軔體(MX、MX400以上的等級)
而MX200已停產^^

[by073828]

我的顯示卡是艾爾莎ELSA Erazor 影雷者 511 TV-Out
晶片是Geforce2 mx400 不是mx200

[jerrys123]

我知道了=.=
是HiPoint磁碟陣列晶片的關係~_~|||
想到有個User跟我反應灌了xp要等很久才會跳到登入畫面
關於這個問題你可以直接跟大迅聯絡(KT7A-R的代理商)
或直接找陞技的客服問問看
建議你更新你主機板的BIOS到最新版再試試看
祝成功

[Romulus]

最初由 by073828 發表

我灌XP重新開機之後就一直停在黑黑的畫面!!
就算只安裝一顆硬碟還是沒用.xp的光碟機開機也是沒用.
根本沒安裝完成第一次重新開機的時候就一直卡在黑黑的畫面.
電腦配備
cpu:amd athlon 1.4g
m/b:abit k7ta-r
hd:2顆 (ibm 10.1g seagate 40g)
cdrom:三台 (teac540e.pioneer dvd115.teaccdr58s)
其他配備 yamaha音效卡.scsi卡
目前的系統為win me
請各位幫幫忙!!mail:[email protected]

我建議你更新主機板的Bios,若方便可先將Bios設回到 <出廠設定值> 也許就可以了.

[by073828]

謝謝各位的回覆!!!
一定要更新BIOS嗎??
我到陞技的網站看KT7A-R的最新BIOS.kt7s65.exe檔案說明中並沒有提到HPT370
與Winxp的相容的問題要更新嗎???
我也試過微軟的方法以GHOST.到另一台電腦複製映像檔.來用但一進入XP安裝程式
就當機!!!

[jerrys123]

[ KT7A-RAID ]

Filename: KT764.EXE
Date: 11/07/2001
ID: 64 NOTE:
Fine tune the register value of CPU driving strength to enhance the system stability.
HPT 370 RAID BIOS version 1.11.0402. The RAID function is for KT7-RAID /KT7A-RAID only.This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.

Filename: KT74A.EXE
Date: 08/24/2001
ID: 4A NOTE:
Support AMD 1.4GHz(133)CPU.
HPT 370 RAID BIOS version 1.11.0402.

Filename: KT73R.EXE
Date: 07/13/2001
ID: 3R NOTE:
Update BIOS code.
Enhance ISA PnP compatibility.
Enhance SCSI adapters compatibility.
Add 1400(133) Athlon support for KT7A/KT7A-RAID.
Add new option "1200 above" for high speed Athlons with 100FSB. KT7 / KT7-RAID / KT7A / KT7A-RAID / KT7E only support 1.4G(100) Athlon with L1 bridges disconnected. Check L1 before you buy a CPU please!
For Creative SBLive 5.1 sound card users, you may try these options while experience sound quality issue.
.PCI master read caching, default setting=Disabled
.PCI master time-out, Default setting=1
Setting above options to Disabled/3 will lead to the same result with VIA Latency patch V0.14 and may help SB Live 5.1 sound issue. If the system experiences low performance after these settings, enable the "PCI master read caching" please.

Enhance the high speed 133FSB Athlon stability for KT7A/KT7A-RAID.
HPT 370 RAID BIOS version 1.11.0402 for KT7-RAID/KT7A-RAID. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
BIOS compile date: 07/05/2001
!!! Attention for upgrading KT7-RAID / KT7A-RAID BIOS to 3R !!!

When you upgrade bios from ZT to 3R, we highly recommend you backup your system and data to an independent storage device first. New HPT 1.11.0402 bios may corrupt original RAID configuration created on old bios occasionally. That means you may need to rebuild RAID configuration. If it happens, all the data on RAID-0 will be gone!

For RAID-1 user, please press "CTRL+H" to enter hpt370 setup

Filename: KT73C.EXE
Date: 06/11/2001
ID: 3C NOTE:
HPT370 RAID BIOS version 1.11.0402
Attention !!!
Since bios 3C includes HPT bios 1.11, you may need upgrade your HPT370 driver before flashing the bios.
When you upgrade your bios from ZT to 3C, we highly recommend you backup your system to an independent storage device first. This is because the new HPT 1.11 bios can not keep the old configuration. This means you may need to rebuild your RAID system. Therefore, you may lose RAID-0 data when you update the bios from old version to new one.

For RAID-1 user, please press "CTRL+H" to enter hpt370 setup screen and do "Duplicate Mirror Disk " to recover RAID system.

=_=|||這個...
http://www.abit.com.tw
上面copy下來的
仔細找找...
一堆更新你HP磁陣晶片的BIOS更新檔^^|||
下載KT764.EXE吧!
最新版的

[jerrys123]

還有...XP不能用GHOST的...