請幫幫忙,看一下。

顯示結果從第 1 筆 到 3 筆,共計 3 筆
  1. #1
    會員
    註冊日期
    2001-09-26
    討論區文章
    4

    請幫幫忙,看一下。

    我的主機板是精英的板子 P6BXT-A+,大概是兩年前的板子,我的CPU是賽揚300MHz。

    不曉得可否換成P3 850MHz的CPU(Socket370)呢?

    下面是主機板的規格:

    The P6BXT-A+ is a full-sized ATX board measuring 305x220mm and using 4-layer printed circuit board. The P6BXT-A+ has a special design feature so that it includes a Slot-1 processor slot and a PPGA (Plastic Pin Grid Array) Celeron Socket-PGA370 processor socket. This feature means that you can install the mainboard with either a Pentium-III cartridge, a Pentium-II cartridge, the SEPP (Single Edge Processor Package) Celeron cartridge, or one of the new generation PPGA Celeron cartridges. In addition, the mainboard supports a 66 MHz memory bus, or a 100 MHz memory bus, so you can use inexpensive 66MHz memory chips, or higher-performance PC-100 memory chips. The board is installed with an integrated PCI-3D sound system and has a full suite of I/O ports. Seven expansion slots are available for system development and hardware monitoring is supported. This board allows complete flexibility. System integrators can choose the high-performance Slot -1 processor or the inexpensive PPGA Celeron processor according to the system requirements and the price/performance comparison of the two kinds of processor.

    PROCESSORS

    SECC2 Pentium III up to 850MHz(100MHz FSB), Pentium II
    FC-PGA Pentium III up to 850MHz(100MHz FSB)
    Celeron PPGA up to 533MHz / FC-PGA up to 800MHz
    CHIPSET

    Intel 440BX
    MEMORY

    Three 168-pin DIMM
    Maximum: 768MB
    SYSTEM BIOS

    Award BIOS
    I/O INTERFACE

    Supports Plug and Play function
    One - EPP/ECP mode parallel port
    Two - 16550 high-speed serial I/O ports (2 connectors)
    Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
    Dual PCI IDE interfaces - supports four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA 33)
    PS/2 keyboard and PS/2 mouse connectors
    ATX Power Supply Connector
    Audio Ports(Line-in, Line-out, Mic-in, CD-in and game port)
    Two sets of USB connector
    Other ports:
    IrDA Cable header
    Green, HDD, power indicator LED headers
    CPU and Case Fan headers
    LAN Card Wake Up/Internal Modem Ring Wake-Up headers

    RTC & BATTERY

    Intel 82371EB (PIIX4E) included 256 bytes CMOS SRAM
    FORM FACTOR

    ATX (305mm*220mm)


    另外,不曉得他是AGP 2X 還是 4X 呢?

    請告知,Thanks!




  2. #2
    會員 atlasricky 的大頭照
    註冊日期
    2001-09-04
    所在地區
    2m/512
    討論區文章
    110

    Re: 請幫幫忙,看一下。

    最初由 chechi65
    我的主機板是精英的板子 P6BXT-A+,大概是兩年前的板子,我的CPU是賽揚300MHz。

    不曉得可否換成P3 850MHz的CPU(Socket370)呢?

    下面是主機板的規格:

    The P6BXT-A+ is a full-sized ATX board measuring 305x220mm and using 4-layer printed circuit board. The P6BXT-A+ has a special design feature so that it includes a Slot-1 processor slot and a PPGA (Plastic Pin Grid Array) Celeron Socket-PGA370 processor socket. This feature means that you can install the mainboard with either a Pentium-III cartridge, a Pentium-II cartridge, the SEPP (Single Edge Processor Package) Celeron cartridge, or one of the new generation PPGA Celeron cartridges. In addition, the mainboard supports a 66 MHz memory bus, or a 100 MHz memory bus, so you can use inexpensive 66MHz memory chips, or higher-performance PC-100 memory chips. The board is installed with an integrated PCI-3D sound system and has a full suite of I/O ports. Seven expansion slots are available for system development and hardware monitoring is supported. This board allows complete flexibility. System integrators can choose the high-performance Slot -1 processor or the inexpensive PPGA Celeron processor according to the system requirements and the price/performance comparison of the two kinds of processor.

    PROCESSORS

    SECC2 Pentium III up to 850MHz(100MHz FSB), Pentium II
    FC-PGA Pentium III up to 850MHz(100MHz FSB)
    Celeron PPGA up to 533MHz / FC-PGA up to 800MHz
    CHIPSET

    Intel 440BX
    MEMORY

    Three 168-pin DIMM
    Maximum: 768MB
    SYSTEM BIOS

    Award BIOS
    I/O INTERFACE

    Supports Plug and Play function
    One - EPP/ECP mode parallel port
    Two - 16550 high-speed serial I/O ports (2 connectors)
    Supports 360K~2.88M Byte, 3 Mode FDDs or LS120
    Dual PCI IDE interfaces - supports four IDE devices (PIO mode 4, DMA Mode 2, Ultra DMA 33)
    PS/2 keyboard and PS/2 mouse connectors
    ATX Power Supply Connector
    Audio Ports(Line-in, Line-out, Mic-in, CD-in and game port)
    Two sets of USB connector
    Other ports:
    IrDA Cable header
    Green, HDD, power indicator LED headers
    CPU and Case Fan headers
    LAN Card Wake Up/Internal Modem Ring Wake-Up headers

    RTC & BATTERY

    Intel 82371EB (PIIX4E) included 256 bytes CMOS SRAM
    FORM FACTOR

    ATX (305mm*220mm)


    另外,不曉得他是AGP 2X 還是 4X 呢?

    請告知,Thanks!

    我想應該是不行~這跟CPU的製程有關希~現在新的P-3是FC-PGA封裝ㄉ~跟舊賽陽是不同的封裝製程~~我不太清楚更星BIOS可不可以~我想應該是不行~妳可以上精英網站看一下~那應該只有AGP2X~因為 440 BX只有支援AGP2X~這ㄍ我可以確定~還有就算可以上P-3~應該是上舊的100MHZ的~P-3~850好像是新製程不行~我記的最高好像有出到700~鷹為我們公司~就是用700的P-3然後也是440BX~的CHIP~不過要更新BIOS才會抓到P-3不然指認的P-2~但效能我覺得跟P-2差不多~換了跟沒換一樣~和張板子吧~CPU我認為他不是最重要的~不知道你怎ㄇ認為
    附加圖片 附加圖片 piii_pii_celeron.gif  

  3. #3
    會員
    註冊日期
    2001-09-26
    討論區文章
    4
    SECC2 Pentium III up to 850MHz(100MHz FSB), Pentium II
    FC-PGA Pentium III up to 850MHz(100MHz FSB)
    Celeron PPGA up to 533MHz / FC-PGA up to 800MHz

    這是它支援的CPU格式,它不是有FC-PGA嗎?那可買到哪種CPU呢?

    它有 SLOT 1 和 Socket 370 兩種介面。

類似的主題

  1. 【問題】請幫忙看一下是不是數據機出問題
    作者:sam95142 所在討論版:---- ADSL 軟 硬 體 技 術
    回覆: 2
    最後發表: 2007-06-09, 11:53 AM
  2. 【求助】請幫忙看一下適合升8M嗎?
    作者:charmingleg 所在討論版:---- ADSL 連 線 測 速 版
    回覆: 2
    最後發表: 2007-04-20, 10:11 PM
  3. [問題]請幫忙看一下ATU-R設定
    作者:DAVIDKAO 所在討論版:---- ADSL 軟 硬 體 技 術
    回覆: 11
    最後發表: 2007-02-21, 11:52 PM
  4. 【問題】請幫忙看一下8m/640k的數值好不好
    作者:MOSSLIN 所在討論版:---- ADSL 連 線 測 速 版
    回覆: 1
    最後發表: 2006-08-31, 10:34 PM
  5. 請幫幫忙一下...win98的問題
    作者:chisato 所在討論版:-- Windows 討 論 版
    回覆: 4
    最後發表: 2001-09-08, 02:27 PM

 

此網頁沒有從搜尋引擎而來的訪客

發表文章規則

  • 不可以發表新主題
  • 不可以回覆文章
  • 不可以上傳附加檔案
  • 不可以編輯自己的文章
  •