請問一下 tekram(建邦) dc-390的BIOS如何載入!!!
----------------------------------------------------------------------
作業糸統 win98
CPU p2 300Mhz
主机版 技嘉 GA-6BXC PCB(ver):1.7版 BIOS(ver):6BXC_29
SCSI卡 Tekram(建邦) DC-390 SCSI(tm)2規格
BIOS rev:2.02版
(DVD-rom) pioneer DVD-U02(SCSI)
----------------------------------------------------------------------
1:請問 tekram(建邦) dc-390的BIOS如何載入
因為,建邦中文網址好像進不去,以下為其英文網址
[url]http://www.tekram.com/updates.asp?Product=DC-390_Series[/url]
Version: 3.21
File: DC390.ZIP
Date: 3/16/00
Size: 773KB
ps:這樣做也可以找到SCSI卡, 控制台--加入新的硬体--下一步之後(選 否)--下一步--下一步(選 SCSI控制卡)--
下一步--選廠商 Tekram 版本:Tekram DC-390U/F pciscsi adapter
不過這樣做不知效果好不好?
2:請問pionner DVD-U02的drive如何載入啟用
它的載入軟体位置於如下
[url]http://www.pioneerelectronics.com/Pioneer/CDA/ServiceAndSupport/SelfHelpForIndDet/1,1457,1354,00.html[/url]
不好意思麻煩各位,因為研究了久,還是不知道該怎麻辦,謝謝!!!!
順便請問一下,這句話是什麼意思,因為DC-390的bios我載入了 windows3.1版的.
Disk boot sector is to be modified.
type y to accept any key to abort award software,inc.
Re: 請問一下 tekram(建邦) dc-390的BIOS如何載入!!!
[QUOTE][i]最初由 wuwu [/i]
[B]----------------------------------------------------------------------
Version: 3.21
File: DC390.ZIP
Date: 3/16/00
Size: 773KB
最新含bios
Version: 3.23
File: DC390UFU2_323A.ZIP
Date:
Size: 842KB
原文說明
*** DC-390U/W/F/U2 Windows 98 Driver Installation ***
===================================================
Windows 98 now will detect Tekram DC-390U/F(old version before 3.0)
PCI SCSi Cards, and prompt you the message "Need update driver from Tekram"
during installation the Windows 98 system.
But the Windows 98 will not install DC-390U/F device driver for you.
So, you need to install the DC-390U/F device driver manually.
To install the Tekram DC-390U/F driver follow these steps:
1) First, you need to install Windows 98.
2) After completely installed the Windows 98 system, you need to update
Tekram device driver manually.
1. Click Start. Select Settings-->Control Panel.
2. Double click on the System icon.
3. Click on the Device Manager tab.
4. Either double click on the SCSI controllers entry, or click once on the
plus sign to the left of it.
5. Select the desired PCI symbios xxx SCSI Host Adapter entry or
Tekram DC390 U/F SCSI Host Adapter entry. Click the Properties button.
6. Click the Driver button. In Windows 95, the version of the currently
active driver should display in the File details section. In Windows 98,
press the DRIVER FILE DETAILS button to get this information to appear.
Note: In certain versions of Windows 95, the version of the active driver
appears as NOT available. This is an operating system issue and is
fixed in later versions of Windows 95. To verify the version of the
driver, click on the Properties field of the trm390w.MPD file under
the Version tab. The MPD driver is generally found in the
\WINDOWS\SYSTEM\IOSUBSYS\ directory.
7.. Click the Change Driver... button.
* * * * * For Windows 95 * * * * *
8. Even though you may have previously installed the trm390w.mpd, porceed
to click on the Have Disk... button to install a newer version.
9. Insert the Tekram Driver diskette in drive A: (or B:) and click OK.
and click OK. If using drive B:, you must select it from the pick list.
10. The Select Device dialog box should display "Tekram xxx PCI SCSI
Host Adapter," where xxx matches the installed adapter. Click OK.
11. The Driver tab is updated to display the new driver files. To install
these driver files, click OK. (Do NOT click the Change Driver... button.)
The driver files are copied, and a new driver database is built.
* * * * * For Windows 98 * * * * *
"Update Device Driver Wizard" starts and provides several windows with choices.
Follow the steps below to correctly install the device driver for Win98.
8. After the Intro window appears, click on the NEXT button.
9. The Wizard provides a choice between having the Wizard search for a
better driver than the one in use or displays a list of drivers from a
specific location. Choose "search..." and click on the NEXT button.
10. The next window allows the user to specify which device(s) will be
searched such as a floppy diskette, CD-ROM, or specify a specific path.
Select "Floppy disk drive" only and click on the NEXT button.
11. The next window queries the user about utilizing the currently installed
driver.
Mark "Install one of the other drivers" and click on the
"View List" button.
12. Next, a list of drivers appears from the specified search devices and the
currently installed driver. Highlight the driver of choice and click OK.
13. The previous window appears with the selected driver displayed as the
driver to install. Click on the NEXT button.
14. The next window displays the chosen driver along with reference to the
designated path to install it in. Click on the NEXT button.
15. The Wizard summary window appears. Click on the Finish button.
3) Reboot the system.
