崴海王及ARGtek U25G+5 - 第 3 頁

  • 崴海王及ARGtek U25G+5

    • 第 3 頁，共 4 頁 首頁首頁 1 2 3 4 末頁末頁
    顯示結果從第 21 筆 到 30 筆，共計 32 筆
    1. 2009-07-13, 06:18 PM #21
      FYI
      FYI 目前未上線
      會員
      註冊日期
      2001-06-22
      討論區文章
      7,294

      ARGTEK ARG-U23gA (RTL8187L) 上傳測試

      1. WinXP 裝置管理員顯示ARG-U23gA (RTL8187L) 必需的電力為500mA
      2. 省電模式: 無, 未連線耗電流98mA, 連線閒置耗電流292mA, 連線最大耗電流355mA
      3. 省電模式: "最小" 或 "最大", 未連線耗電流98mA, 連線閒置耗電流162mA(變動), 連線耗電流165~355mA
      4. 網卡塑膠外殼側面中間表面溫度約49~50 ℃, 室溫27 ℃

      測試環境:
      (192.168.1.66) PC1 <──有線── AP <----無線---- PC2 (192.168.1.22)
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.66, TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[1912] local 192.168.1.22 port 1054 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  22.4 MBytes  18.8 Mbits/sec
[1912] 10.0-20.0 sec  21.0 MBytes  17.6 Mbits/sec
[1912] 20.0-30.0 sec  22.3 MBytes  18.7 Mbits/sec
[1912] 30.0-40.0 sec  22.3 MBytes  18.7 Mbits/sec
[1912] 40.0-50.0 sec  22.3 MBytes  18.7 Mbits/sec
[1912] 50.0-60.0 sec  21.4 MBytes  17.9 Mbits/sec
[1912]  0.0-60.0 sec   132 MBytes  18.4 Mbits/sec
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.66, TCP port 5001
TCP window size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1055 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  29.6 MBytes  24.8 Mbits/sec
[1912] 10.0-20.0 sec  29.3 MBytes  24.6 Mbits/sec
[1912] 20.0-30.0 sec  29.4 MBytes  24.6 Mbits/sec
[1912] 30.0-40.0 sec  29.4 MBytes  24.7 Mbits/sec
[1912] 40.0-50.0 sec  29.4 MBytes  24.7 Mbits/sec
[1912] 50.0-60.0 sec  29.5 MBytes  24.8 Mbits/sec
[1912]  0.0-60.0 sec   177 MBytes  24.7 Mbits/sec
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -u -b 54M -l 1472
------------------------------------------------------------
Client connecting to 192.168.1.66, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1056 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  32.2 MBytes  27.0 Mbits/sec
[1912] 10.0-20.0 sec  32.3 MBytes  27.1 Mbits/sec
[1912] 20.0-30.0 sec  32.3 MBytes  27.1 Mbits/sec
[1912] 30.0-40.0 sec  32.1 MBytes  26.9 Mbits/sec
[1912] 40.0-50.0 sec  32.1 MBytes  26.9 Mbits/sec
[1912] 50.0-60.0 sec  32.4 MBytes  27.2 Mbits/sec
[1912]  0.0-60.0 sec   193 MBytes  27.0 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.0 sec   193 MBytes  27.0 Mbits/sec  1.233 ms    0/137685 (0%)
[1912] Sent 137685 datagrams
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -u -b 54M -l 64768
------------------------------------------------------------
Client connecting to 192.168.1.66, UDP port 5001
Sending 64768 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1057 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  35.9 MBytes  30.1 Mbits/sec
[1912] 10.0-20.0 sec  35.9 MBytes  30.1 Mbits/sec
[1912] 20.0-30.0 sec  35.9 MBytes  30.1 Mbits/sec
[1912] 30.0-40.0 sec  35.9 MBytes  30.2 Mbits/sec
[1912] 40.0-50.0 sec  35.9 MBytes  30.1 Mbits/sec
[1912] 50.0-60.0 sec  35.9 MBytes  30.2 Mbits/sec
[1912]  0.0-60.0 sec   216 MBytes  30.1 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.0 sec   216 MBytes  30.1 Mbits/sec  5.283 ms    0/ 3489 (0%)
[1912] Sent 3489 datagrams
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -- -m 1460
TCP STREAM TEST to 192.168.1.66
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

  8192   8192   1460    60.00      18.65
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -- -s 64K -S 64K -m 1460
TCP STREAM TEST to 192.168.1.66
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 65536  65536   1460    60.00      24.78
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 1472
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.66
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536    1472   60.00      153472      0      30.12
 65536           60.00      153472             30.12
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 64768
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.66
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536   64768   60.00        3468      0      29.95
 65536           60.00        3468             29.95


      回覆時引用此文章 回覆時引用此文章
    2. 2009-07-13, 06:28 PM #22
      FYI
      FYI 目前未上線
      會員
      註冊日期
      2001-06-22
      討論區文章
      7,294

      ARGTEK ARG-U23gA (RTL8187L) 下載測試

      AP: La Fonera Plus, 無線網卡: ARGTEK ARG-U23gA (RTL8187L)
      (192.168.1.66) PC1 ──有線──> AP ----無線----> PC2 (192.168.1.22)
      測試結果, 無線下載:
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.22, TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[1912] local 192.168.1.66 port 3075 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  19.5 MBytes  16.4 Mbits/sec
[1912] 10.0-20.0 sec  20.1 MBytes  16.8 Mbits/sec
[1912] 20.0-30.0 sec  20.2 MBytes  16.9 Mbits/sec
[1912] 30.0-40.0 sec  20.3 MBytes  17.1 Mbits/sec
[1912] 40.0-50.0 sec  19.9 MBytes  16.7 Mbits/sec
[1912] 50.0-60.0 sec  20.1 MBytes  16.8 Mbits/sec
[1912]  0.0-60.0 sec   120 MBytes  16.8 Mbits/sec
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.22, TCP port 5001
TCP window size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 3088 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  29.1 MBytes  24.4 Mbits/sec
[1912] 10.0-20.0 sec  27.8 MBytes  23.3 Mbits/sec
[1912] 20.0-30.0 sec  28.1 MBytes  23.6 Mbits/sec
[1912] 30.0-40.0 sec  28.3 MBytes  23.7 Mbits/sec
[1912] 40.0-50.0 sec  29.1 MBytes  24.4 Mbits/sec
[1912] 50.0-60.0 sec  29.9 MBytes  25.1 Mbits/sec
[1912]  0.0-60.0 sec   172 MBytes  24.1 Mbits/sec
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -u -b 54M -l 1472
------------------------------------------------------------
Client connecting to 192.168.1.22, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 3101 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  62.5 MBytes  52.5 Mbits/sec
[1912] 10.0-20.0 sec  63.0 MBytes  52.8 Mbits/sec
[1912] 20.0-30.0 sec  63.0 MBytes  52.8 Mbits/sec
[1912] 30.0-40.0 sec  62.7 MBytes  52.6 Mbits/sec
[1912] 40.0-50.0 sec  62.9 MBytes  52.8 Mbits/sec
[1912] 50.0-60.0 sec  62.9 MBytes  52.8 Mbits/sec
[1912]  0.0-60.0 sec   377 MBytes  52.7 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.1 sec   232 MBytes  32.4 Mbits/sec  1.439 ms 103090/268518 (38%)
[1912] Sent 268518 datagrams
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -u -b 33M -l 1472
------------------------------------------------------------
Client connecting to 192.168.1.22, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 3112 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  39.4 MBytes  33.0 Mbits/sec
[1912] 10.0-20.0 sec  39.4 MBytes  33.1 Mbits/sec
[1912] 20.0-30.0 sec  39.3 MBytes  33.0 Mbits/sec
[1912] 30.0-40.0 sec  39.4 MBytes  33.0 Mbits/sec
[1912] 40.0-50.0 sec  39.3 MBytes  33.0 Mbits/sec
[1912] 50.0-60.0 sec  39.4 MBytes  33.0 Mbits/sec
[1912]  0.0-60.0 sec   236 MBytes  33.0 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.1 sec   235 MBytes  32.7 Mbits/sec  1.524 ms 1115/168259 (0.66%)
[1912] Sent 168259 datagrams
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -u -b 32M -l 64768
------------------------------------------------------------
Client connecting to 192.168.1.22, UDP port 5001
Sending 64768 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 3290 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  38.2 MBytes  32.0 Mbits/sec
[1912] 10.0-20.0 sec  38.2 MBytes  32.0 Mbits/sec
[1912] 20.0-30.0 sec  38.1 MBytes  32.0 Mbits/sec
[1912] 30.0-40.0 sec  38.2 MBytes  32.0 Mbits/sec
[1912] 40.0-50.0 sec  38.2 MBytes  32.0 Mbits/sec
[1912] 50.0-60.0 sec  38.1 MBytes  32.0 Mbits/sec
[1912]  0.0-60.0 sec   229 MBytes  32.0 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.0 sec   229 MBytes  32.0 Mbits/sec  4.808 ms    1/ 3707 (0.027%)
[1912] Sent 3707 datagrams
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -u -b 33M -l 64768
------------------------------------------------------------
Client connecting to 192.168.1.22, UDP port 5001
Sending 64768 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 3301 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  39.3 MBytes  33.0 Mbits/sec
[1912] 10.0-20.0 sec  39.3 MBytes  33.0 Mbits/sec
[1912] 20.0-30.0 sec  39.3 MBytes  33.0 Mbits/sec
[1912] 30.0-40.0 sec  39.3 MBytes  33.0 Mbits/sec
[1912] 40.0-50.0 sec  39.3 MBytes  33.0 Mbits/sec
[1912] 50.0-60.0 sec  39.4 MBytes  33.1 Mbits/sec
[1912]  0.0-60.0 sec   236 MBytes  33.0 Mbits/sec
[1912] WARNING: did not receive ack of last datagram after 10 tries.
[1912] Sent 3823 datagrams
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -- -m 1460
TCP STREAM TEST to 192.168.1.22
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

  8192   8192   1460    60.00      16.92
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -- -s 64K -S 64K -m 1460
TCP STREAM TEST to 192.168.1.22
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 65536  65536   1460    60.00      23.56
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 1472
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.22
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536    1472   60.00      293936      0      57.69
 65536           60.00      165592             32.50
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 64768
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.22
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536   64768   60.00       10875      0      93.91
 65536           60.00          14              0.12
      回覆時引用此文章 回覆時引用此文章
    3. 2009-07-14, 05:15 PM #23
      FYI
      FYI 目前未上線
      會員
      註冊日期
      2001-06-22
      討論區文章
      7,294

      ARGTEK ARG-U302nA 上傳測試

      AP: La Fonera Plus, 網卡: ARGTEK ARG-U302nA
      1. WinXP 裝置管理員顯示ARG-U302nA 必需的電力為450mA
      2. 省電模式: CAM, 未連線耗電流200mA, 連線閒置耗電流200mA, 連線耗電流280~335mA
      3. 省電模式: MAX_PSP, 未連線耗電流81~200mA(變動), 連線閒置耗電流82~200mA(變動), 連線耗電流276~337mA
      4. 網卡塑膠外殼正面最上靠近天線處表面溫度約44~64 ℃, 室溫27 ℃

      測試環境:
      (192.168.1.66) PC1 <──有線── AP <----無線---- PC2 (192.168.1.22)
      測試結果, 無線上傳:
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.66, TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[1912] local 192.168.1.22 port 1128 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  22.5 MBytes  18.9 Mbits/sec
[1912] 10.0-20.0 sec  22.5 MBytes  18.8 Mbits/sec
[1912] 20.0-30.0 sec  22.7 MBytes  19.1 Mbits/sec
[1912] 30.0-40.0 sec  21.3 MBytes  17.8 Mbits/sec
[1912] 40.0-50.0 sec  20.6 MBytes  17.2 Mbits/sec
[1912] 50.0-60.0 sec  20.9 MBytes  17.5 Mbits/sec
[1912]  0.0-60.0 sec   130 MBytes  18.2 Mbits/sec
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.66, TCP port 5001
TCP window size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1129 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  34.3 MBytes  28.8 Mbits/sec
[1912] 10.0-20.0 sec  34.1 MBytes  28.6 Mbits/sec
[1912] 20.0-30.0 sec  34.2 MBytes  28.7 Mbits/sec
[1912] 30.0-40.0 sec  34.3 MBytes  28.8 Mbits/sec
[1912] 40.0-50.0 sec  34.2 MBytes  28.7 Mbits/sec
[1912] 50.0-60.0 sec  34.3 MBytes  28.8 Mbits/sec
[1912]  0.0-60.0 sec   205 MBytes  28.7 Mbits/sec
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -u -b 54M -l 1472
------------------------------------------------------------
Client connecting to 192.168.1.66, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1131 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  41.6 MBytes  34.9 Mbits/sec
[1912] 10.0-20.0 sec  41.4 MBytes  34.7 Mbits/sec
[1912] 20.0-30.0 sec  41.4 MBytes  34.7 Mbits/sec
[1912] 30.0-40.0 sec  40.3 MBytes  33.8 Mbits/sec
[1912] 40.0-50.0 sec  41.2 MBytes  34.6 Mbits/sec
[1912] 50.0-60.0 sec  41.8 MBytes  35.1 Mbits/sec
[1912]  0.0-60.0 sec   248 MBytes  34.6 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.1 sec   248 MBytes  34.6 Mbits/sec  0.755 ms    0/176424 (0%)
[1912] Sent 176424 datagrams
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -u -b 54M -l 64768
------------------------------------------------------------
Client connecting to 192.168.1.66, UDP port 5001
Sending 64768 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1132 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  41.6 MBytes  34.9 Mbits/sec
[1912] 10.0-20.0 sec  41.9 MBytes  35.1 Mbits/sec
[1912] 20.0-30.0 sec  42.2 MBytes  35.4 Mbits/sec
[1912] 30.0-40.0 sec  41.8 MBytes  35.1 Mbits/sec
[1912] 40.0-50.0 sec  41.1 MBytes  34.5 Mbits/sec
[1912] 50.0-60.0 sec  41.4 MBytes  34.7 Mbits/sec
[1912]  0.0-60.0 sec   250 MBytes  34.9 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.1 sec   250 MBytes  34.9 Mbits/sec  4.961 ms    0/ 4048 (0%)
[1912] Sent 4048 datagrams
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -- -m 1460
TCP STREAM TEST to 192.168.1.66
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

  8192   8192   1460    60.00      18.47
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -- -s 64K -S 64K -m 1460
TCP STREAM TEST to 192.168.1.66
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 65536  65536   1460    60.00      29.00
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 1472
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.66
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536    1472   60.00      179802      0      35.29
 65536           60.00      179802             35.29
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 64768
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.66
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536   64768   60.00        4072      0      35.16
 65536           60.00        4072             35.16
      此文章於 2009-07-20 05:02 PM 被 FYI 編輯。 原因: 更正表面溫度
      回覆時引用此文章 回覆時引用此文章
    4. 2009-07-14, 05:28 PM #24
      FYI
      FYI 目前未上線
      會員
      註冊日期
      2001-06-22
      討論區文章
      7,294

      ARGTEK ARG-U302nA 下載測試

      AP: La Fonera Plus, 無線網卡: ARGTEK ARG-U302nA
      (192.168.1.66) PC1 ──有線──> AP ----無線----> PC2 (192.168.1.22)
      測試結果, 無線下載:
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.22, TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[1912] local 192.168.1.66 port 2050 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  18.1 MBytes  15.1 Mbits/sec
[1912] 10.0-20.0 sec  18.2 MBytes  15.2 Mbits/sec
[1912] 20.0-30.0 sec  17.2 MBytes  14.4 Mbits/sec
[1912] 30.0-40.0 sec  18.1 MBytes  15.2 Mbits/sec
[1912] 40.0-50.0 sec  17.9 MBytes  15.1 Mbits/sec
[1912] 50.0-60.0 sec  18.1 MBytes  15.2 Mbits/sec
[1912]  0.0-60.0 sec   108 MBytes  15.0 Mbits/sec
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.22, TCP port 5001
TCP window size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 2065 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  29.9 MBytes  25.1 Mbits/sec
[1912] 10.0-20.0 sec  28.3 MBytes  23.8 Mbits/sec
[1912] 20.0-30.0 sec  29.6 MBytes  24.9 Mbits/sec
[1912] 30.0-40.0 sec  29.7 MBytes  24.9 Mbits/sec
[1912] 40.0-50.0 sec  29.2 MBytes  24.5 Mbits/sec
[1912] 50.0-60.0 sec  27.6 MBytes  23.2 Mbits/sec
[1912]  0.0-60.0 sec   174 MBytes  24.4 Mbits/sec
      Iperf 無法完成UDP 下載測試
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -u -b 1M -l 1472
------------------------------------------------------------
Client connecting to 192.168.1.22, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 2111 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  1.19 MBytes  1.00 Mbits/sec
[1912] 10.0-20.0 sec  1.19 MBytes  1.00 Mbits/sec
[1912] 20.0-30.0 sec  1.19 MBytes   999 Kbits/sec
[1912] 30.0-40.0 sec  1.19 MBytes  1.00 Mbits/sec
[1912] 40.0-50.0 sec  1.19 MBytes  1000 Kbits/sec
[1912] 50.0-60.0 sec  1.19 MBytes  1000 Kbits/sec
[1912]  0.0-60.0 sec  7.16 MBytes  1.00 Mbits/sec
[1912] WARNING: did not receive ack of last datagram after 10 tries.
[1912] Sent 5097 datagrams
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -- -m 1460
TCP STREAM TEST to 192.168.1.22
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

  8192   8192   1460    60.00      14.82
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -- -s 64K -S 64K -m 1460
TCP STREAM TEST to 192.168.1.22
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 65536  65536   1460    60.00      23.89
      Netperf 無法完成UDP 下載測試
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 1472
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.22
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536    1472   60.00      293487      0      57.60
 65536           60.00        2612              0.51
      回覆時引用此文章 回覆時引用此文章
    5. 2009-07-16, 08:36 PM #25
      FYI
      FYI 目前未上線
      會員
      註冊日期
      2001-06-22
      討論區文章
      7,294

      ARGTEK ARG-U302nA 上傳測試

      AP: Buffalo WHR-G300N, 網卡: ARGTEK ARG-U302nA, 距離2 公尺, 加密方式: WPA-PSK-TKIP
      1. WinXP 裝置管理員顯示ARG-U302nA 必需的電力為450mA
      2. 省電模式: CAM, 未連線耗電流230mA, 連線閒置耗電流230mA, 連線耗電流285~355mA
      3. 省電模式: MAX_PSP, 未連線耗電流86mA, 連線閒置耗電流84~200mA(變動)
      4. 網卡塑膠外殼側面中間表面溫度約50~70 ℃, 室溫32 ℃

      測試環境:
      (192.168.1.66) PC1 <──有線── AP <----無線---- PC2 (192.168.1.22)
      無線上傳測試結果:
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.66, TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[1912] local 192.168.1.22 port 1516 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  34.7 MBytes  29.1 Mbits/sec
[1912] 10.0-20.0 sec  34.6 MBytes  29.0 Mbits/sec
[1912] 20.0-30.0 sec  34.4 MBytes  28.9 Mbits/sec
[1912] 30.0-40.0 sec  34.6 MBytes  29.1 Mbits/sec
[1912] 40.0-50.0 sec  34.4 MBytes  28.9 Mbits/sec
[1912] 50.0-60.0 sec  34.4 MBytes  28.8 Mbits/sec
[1912]  0.0-60.0 sec   207 MBytes  29.0 Mbits/sec
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.66, TCP port 5001
TCP window size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1517 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  49.0 MBytes  41.1 Mbits/sec
[1912] 10.0-20.0 sec  49.2 MBytes  41.2 Mbits/sec
[1912] 20.0-30.0 sec  48.1 MBytes  40.4 Mbits/sec
[1912] 30.0-40.0 sec  50.2 MBytes  42.1 Mbits/sec
[1912] 40.0-50.0 sec  50.2 MBytes  42.1 Mbits/sec
[1912] 50.0-60.0 sec  50.2 MBytes  42.1 Mbits/sec
[1912]  0.0-60.0 sec   297 MBytes  41.5 Mbits/sec
      由於WHR-G300N 內建10/100Mbps 交換器不足以應付802.11n, 所以測試結果可能是交換器的極限
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 1M -l 64240
------------------------------------------------------------
Client connecting to 192.168.1.66, TCP port 5001
TCP window size: 1.00 MByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1520 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec   107 MBytes  89.4 Mbits/sec
[1912] 10.0-20.0 sec   104 MBytes  87.1 Mbits/sec
[1912] 20.0-30.0 sec   103 MBytes  86.8 Mbits/sec
[1912] 30.0-40.0 sec   102 MBytes  85.4 Mbits/sec
[1912] 40.0-50.0 sec   100 MBytes  84.1 Mbits/sec
[1912] 50.0-60.0 sec   103 MBytes  86.1 Mbits/sec
[1912]  0.0-60.1 sec   619 MBytes  86.3 Mbits/sec
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -u -b 100M -l 1472
------------------------------------------------------------
Client connecting to 192.168.1.66, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1521 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  55.2 MBytes  46.3 Mbits/sec
[1912] 10.0-20.0 sec  53.9 MBytes  45.3 Mbits/sec
[1912] 20.0-30.0 sec  55.5 MBytes  46.5 Mbits/sec
[1912] 30.0-40.0 sec  55.5 MBytes  46.5 Mbits/sec
[1912] 40.0-50.0 sec  56.4 MBytes  47.3 Mbits/sec
[1912] 50.0-60.0 sec  52.5 MBytes  44.1 Mbits/sec
[1912]  0.0-60.0 sec   329 MBytes  46.0 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.0 sec   329 MBytes  46.0 Mbits/sec  0.300 ms   43/234381 (0.018%)

[1912] Sent 234381 datagrams
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -u -b 300M -l 1472
------------------------------------------------------------
Client connecting to 192.168.1.66, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1522 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  90.7 MBytes  76.1 Mbits/sec
[1912] 10.0-20.0 sec  85.5 MBytes  71.8 Mbits/sec
[1912] 20.0-30.0 sec  95.8 MBytes  80.4 Mbits/sec
[1912] 30.0-40.0 sec  92.7 MBytes  77.7 Mbits/sec
[1912] 40.0-50.0 sec  88.8 MBytes  74.5 Mbits/sec
[1912] 50.0-60.0 sec  72.1 MBytes  60.5 Mbits/sec
[1912]  0.0-60.0 sec   526 MBytes  73.5 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.0 sec   518 MBytes  72.4 Mbits/sec  0.648 ms 5237/374427 (1.4%)
[1912] Sent 374427 datagrams
      Iperf 無法完成UDP 長訊息下載測試
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 1M -u -b 100M -l 64768
------------------------------------------------------------
Client connecting to 192.168.1.66, UDP port 5001
Sending 64768 byte datagrams
UDP buffer size: 1.00 MByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1523 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec   116 MBytes  97.5 Mbits/sec
[1912] 10.0-20.0 sec   116 MBytes  97.3 Mbits/sec
[1912] 20.0-30.0 sec   116 MBytes  97.0 Mbits/sec
[1912] 30.0-40.0 sec   116 MBytes  97.3 Mbits/sec
[1912] 40.0-50.0 sec   115 MBytes  96.5 Mbits/sec
[1912] 50.0-60.0 sec   116 MBytes  97.0 Mbits/sec
[1912]  0.0-60.0 sec   694 MBytes  97.1 Mbits/sec
[1912] WARNING: did not receive ack of last datagram after 10 tries.
[1912] Sent 11243 datagrams
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -- -m 1460
TCP STREAM TEST to 192.168.1.66
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

  8192   8192   1460    60.00      28.64
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -- -s 64K -S 64K -m 1460
TCP STREAM TEST to 192.168.1.66
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 65536  65536   1460    60.00      41.90
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -- -s 1M -S 1M -m 64240
TCP STREAM TEST to 192.168.1.66
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

1048576 1048576  64240    60.00      80.89
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 1472
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.66
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536    1472   60.00      467609      0      91.78
 65536           60.00      450827             88.48
      Netperf 無法完成UDP 長訊息下載測試
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -t UDP_STREAM -- -s 1M -S 1M -m 64768
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.66
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

1048576   64768   60.00       11824      0     102.11
1048576           60.00         217              1.87


      回覆時引用此文章 回覆時引用此文章
    6. 2009-07-16, 09:16 PM #26
      FYI
      FYI 目前未上線
      會員
      註冊日期
      2001-06-22
      討論區文章
      7,294

      ARGTEK ARG-U302nA 下載測試

      AP: Buffalo WHR-G300N, 網卡: ARGTEK ARG-U302nA, 距離2 公尺, 加密方式: WPA-PSK-TKIP
      (192.168.1.66) PC1 ──有線──> AP ----無線----> PC2 (192.168.1.22)
      測試結果, 無線下載, 部份測試結果可能是內建10/100Mbps 交換器的效能極限, 並非ARG-U302nA 的效能極限:
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.22, TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[1912] local 192.168.1.66 port 4465 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  38.4 MBytes  32.2 Mbits/sec
[1912] 10.0-20.0 sec  38.2 MBytes  32.1 Mbits/sec
[1912] 20.0-30.0 sec  37.6 MBytes  31.5 Mbits/sec
[1912] 30.0-40.0 sec  37.6 MBytes  31.6 Mbits/sec
[1912] 40.0-50.0 sec  37.6 MBytes  31.5 Mbits/sec
[1912] 50.0-60.0 sec  37.8 MBytes  31.7 Mbits/sec
[1912]  0.0-60.0 sec   227 MBytes  31.8 Mbits/sec
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.22, TCP port 5001
TCP window size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 4478 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  76.3 MBytes  64.0 Mbits/sec
[1912] 10.0-20.0 sec  77.4 MBytes  64.9 Mbits/sec
[1912] 20.0-30.0 sec  77.6 MBytes  65.1 Mbits/sec
[1912] 30.0-40.0 sec  77.9 MBytes  65.3 Mbits/sec
[1912] 40.0-50.0 sec  78.3 MBytes  65.7 Mbits/sec
[1912] 50.0-60.0 sec  76.3 MBytes  64.0 Mbits/sec
[1912]  0.0-60.0 sec   464 MBytes  64.8 Mbits/sec
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 1M -l 64240
------------------------------------------------------------
Client connecting to 192.168.1.22, TCP port 5001
TCP window size: 1.00 MByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 4489 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  96.1 MBytes  80.6 Mbits/sec
[1912] 10.0-20.0 sec  92.4 MBytes  77.6 Mbits/sec
[1912] 20.0-30.0 sec  93.4 MBytes  78.4 Mbits/sec
[1912] 30.0-40.0 sec  94.8 MBytes  79.5 Mbits/sec
[1912] 40.0-50.0 sec  94.8 MBytes  79.5 Mbits/sec
[1912] 50.0-60.0 sec  96.0 MBytes  80.5 Mbits/sec
[1912]  0.0-60.1 sec   568 MBytes  79.2 Mbits/sec
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -u -b 100M -l 1472
------------------------------------------------------------
Client connecting to 192.168.1.22, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 4568 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  60.4 MBytes  50.7 Mbits/sec
[1912] 10.0-20.0 sec  60.5 MBytes  50.7 Mbits/sec
[1912] 20.0-30.0 sec  60.2 MBytes  50.5 Mbits/sec
[1912] 30.0-40.0 sec  60.5 MBytes  50.7 Mbits/sec
[1912] 40.0-50.0 sec  60.3 MBytes  50.6 Mbits/sec
[1912] 50.0-60.0 sec  60.4 MBytes  50.7 Mbits/sec
[1912]  0.0-60.0 sec   362 MBytes  50.6 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.0 sec   362 MBytes  50.6 Mbits/sec  0.088 ms  169/258081 (0.065%)

[1912] Sent 258081 datagrams
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 1M -u -b 100M -l 64768
------------------------------------------------------------
Client connecting to 192.168.1.22, UDP port 5001
Sending 64768 byte datagrams
UDP buffer size: 1.00 MByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 4581 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  92.7 MBytes  77.8 Mbits/sec
[1912] 10.0-20.0 sec  92.3 MBytes  77.5 Mbits/sec
[1912] 20.0-30.0 sec  92.4 MBytes  77.5 Mbits/sec
[1912] 30.0-40.0 sec  92.6 MBytes  77.7 Mbits/sec
[1912] 40.0-50.0 sec  92.4 MBytes  77.5 Mbits/sec
[1912] 50.0-60.0 sec  92.5 MBytes  77.6 Mbits/sec
[1912]  0.0-60.0 sec   555 MBytes  77.6 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.0 sec   555 MBytes  77.6 Mbits/sec  5.924 ms    0/ 8985 (0%)
[1912] Sent 8985 datagrams
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -- -m 1460
TCP STREAM TEST to 192.168.1.22
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

  8192   8192   1460    60.00      32.36
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -- -s 64K -S 64K -m 1460
TCP STREAM TEST to 192.168.1.22
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 65536  65536   1460    60.00      70.24
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -- -s 1M -S 1M -m 64240
TCP STREAM TEST to 192.168.1.22
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec
1048576 1048576  64240    60.00      79.03
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 1472
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.22
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536    1472   60.00      301141      0      59.10
 65536           60.00      300761             59.03
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -t UDP_STREAM -- -s 1M -S 1M -m 64768
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.22
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

1048576   64768   60.00       11140      0      96.20
1048576           60.00       11137             96.18
      回覆時引用此文章 回覆時引用此文章
    7. 2009-07-22, 07:07 PM #27
      FYI
      FYI 目前未上線
      會員
      註冊日期
      2001-06-22
      討論區文章
      7,294

      Zydas Atheros ZD1211B 上傳測試

      AP: La Fonera Plus, 網卡: Zydas Atheros ZD1211B, 驅動程式v6.19.0.0, 距離40 公分, 加密方式: WPA2-PSK-AES
      1. WinXP 裝置管理員顯示Zydas Atheros ZD1211B 必需的電力為500mA
      2. 省電模式: 持續 (CAM), 未連線耗電流213mA, 連線閒置耗電流213mA, 連線耗電流244~275mA
      3. 省電模式: 快速 (Fast_PSP) 或最大 (MAX_PSP), 未連線耗電流213mA, 連線閒置耗電流81~190mA(變動)
      4. 網卡塑膠外殼被面中間表面溫度約47~57 ℃, 室溫28 ℃

      測試環境:
      (192.168.1.66) PC1 <──有線── AP <----無線---- PC2 (192.168.1.22)
      測試結果, 無線上傳:
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.66, TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[1912] local 192.168.1.22 port 1330 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  17.3 MBytes  14.5 Mbits/sec
[1912] 10.0-20.0 sec  17.6 MBytes  14.7 Mbits/sec
[1912] 20.0-30.0 sec  17.6 MBytes  14.7 Mbits/sec
[1912] 30.0-40.0 sec  17.6 MBytes  14.8 Mbits/sec
[1912] 40.0-50.0 sec  17.5 MBytes  14.7 Mbits/sec
[1912] 50.0-60.0 sec  17.5 MBytes  14.7 Mbits/sec
[1912]  0.0-60.0 sec   105 MBytes  14.7 Mbits/sec
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.66, TCP port 5001
TCP window size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1331 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  18.3 MBytes  15.4 Mbits/sec
[1912] 10.0-20.0 sec  18.1 MBytes  15.2 Mbits/sec
[1912] 20.0-30.0 sec  18.1 MBytes  15.2 Mbits/sec
[1912] 30.0-40.0 sec  18.7 MBytes  15.7 Mbits/sec
[1912] 40.0-50.0 sec  18.9 MBytes  15.8 Mbits/sec
[1912] 50.0-60.0 sec  18.8 MBytes  15.7 Mbits/sec
[1912]  0.0-60.0 sec   111 MBytes  15.5 Mbits/sec
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -u -b 54M -l 1472
------------------------------------------------------------
Client connecting to 192.168.1.66, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1332 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  20.5 MBytes  17.2 Mbits/sec
[1912] 10.0-20.0 sec  20.7 MBytes  17.4 Mbits/sec
[1912] 20.0-30.0 sec  20.8 MBytes  17.5 Mbits/sec
[1912] 30.0-40.0 sec  20.8 MBytes  17.5 Mbits/sec
[1912] 40.0-50.0 sec  20.8 MBytes  17.4 Mbits/sec
[1912] 50.0-60.0 sec  20.8 MBytes  17.5 Mbits/sec
[1912]  0.0-60.0 sec   124 MBytes  17.4 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.0 sec   124 MBytes  17.4 Mbits/sec  1.686 ms    0/88647 (0%)
[1912] Sent 88647 datagrams
      語法:
      c:\>iperf -c 192.168.1.66 -t 60 -i 10 -w 64K -u -b 54M -l 64768
------------------------------------------------------------
Client connecting to 192.168.1.66, UDP port 5001
Sending 64768 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.22 port 1335 connected with 192.168.1.66 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  20.9 MBytes  17.6 Mbits/sec
[1912] 10.0-20.0 sec  20.9 MBytes  17.5 Mbits/sec
[1912] 20.0-30.0 sec  20.8 MBytes  17.4 Mbits/sec
[1912] 30.0-40.0 sec  20.8 MBytes  17.4 Mbits/sec
[1912] 40.0-50.0 sec  20.4 MBytes  17.2 Mbits/sec
[1912] 50.0-60.0 sec  20.9 MBytes  17.5 Mbits/sec
[1912]  0.0-60.0 sec   125 MBytes  17.4 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.1 sec   125 MBytes  17.4 Mbits/sec  1.466 ms    0/ 2019 (0%)
[1912] Sent 2019 datagrams
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -- -m 1460
TCP STREAM TEST to 192.168.1.66
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

  8192   8192   1460    60.00      14.82
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -- -s 64K -S 64K -m 1460
TCP STREAM TEST to 192.168.1.66
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 65536  65536   1460    60.00      15.92
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 1472
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.66
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536    1472   60.00       88961      0      17.46
 65536           60.00       88961             17.46
      語法:
      c:\>netperf-a4 -H 192.168.1.66 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 64768
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.66
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536   64768   60.00        1998      0      17.25
 65536           60.00        1998             17.25
      回覆時引用此文章 回覆時引用此文章
    8. 2009-07-22, 07:16 PM #28
      FYI
      FYI 目前未上線
      會員
      註冊日期
      2001-06-22
      討論區文章
      7,294

      Zydas Atheros ZD1211B 下載測試

      AP: La Fonera Plus, 網卡: Zydas Atheros ZD1211B, 驅動程式v6.19.0.0, 距離40 公分, 加密方式: WPA2-PSK-AES

      測試環境:
      (192.168.1.66) PC1 ──有線──> AP ----無線----> PC2 (192.168.1.22)
      測試結果, 無線下載:
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.22, TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[1912] local 192.168.1.66 port 2711 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  20.2 MBytes  16.9 Mbits/sec
[1912] 10.0-20.0 sec  20.2 MBytes  17.0 Mbits/sec
[1912] 20.0-30.0 sec  20.1 MBytes  16.9 Mbits/sec
[1912] 30.0-40.0 sec  20.3 MBytes  17.0 Mbits/sec
[1912] 40.0-50.0 sec  20.2 MBytes  17.0 Mbits/sec
[1912] 50.0-60.0 sec  20.2 MBytes  16.9 Mbits/sec
[1912]  0.0-60.0 sec   121 MBytes  16.9 Mbits/sec
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -l 1460
------------------------------------------------------------
Client connecting to 192.168.1.22, TCP port 5001
TCP window size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 2722 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  24.1 MBytes  20.2 Mbits/sec
[1912] 10.0-20.0 sec  24.0 MBytes  20.1 Mbits/sec
[1912] 20.0-30.0 sec  24.1 MBytes  20.2 Mbits/sec
[1912] 30.0-40.0 sec  24.1 MBytes  20.2 Mbits/sec
[1912] 40.0-50.0 sec  23.7 MBytes  19.9 Mbits/sec
[1912] 50.0-60.0 sec  24.2 MBytes  20.3 Mbits/sec
[1912]  0.0-60.0 sec   144 MBytes  20.1 Mbits/sec
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -u -b 54M -l 1472
------------------------------------------------------------
Client connecting to 192.168.1.22, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 2733 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  63.0 MBytes  52.8 Mbits/sec
[1912] 10.0-20.0 sec  63.4 MBytes  53.2 Mbits/sec
[1912] 20.0-30.0 sec  63.2 MBytes  53.0 Mbits/sec
[1912] 30.0-40.0 sec  63.2 MBytes  53.0 Mbits/sec
[1912] 40.0-50.0 sec  63.3 MBytes  53.1 Mbits/sec
[1912] 50.0-60.0 sec  63.4 MBytes  53.2 Mbits/sec
[1912]  0.0-60.0 sec   380 MBytes  53.1 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.1 sec   239 MBytes  33.3 Mbits/sec  1.726 ms 100233/270360 (37%)
[1912] Sent 270360 datagrams
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -u -b 34M -l 1472
------------------------------------------------------------
Client connecting to 192.168.1.22, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 2752 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  40.5 MBytes  34.0 Mbits/sec
[1912] 10.0-20.0 sec  40.5 MBytes  34.0 Mbits/sec
[1912] 20.0-30.0 sec  40.5 MBytes  34.0 Mbits/sec
[1912] 30.0-40.0 sec  40.4 MBytes  33.9 Mbits/sec
[1912] 40.0-50.0 sec  40.5 MBytes  34.0 Mbits/sec
[1912] 50.0-60.0 sec  40.6 MBytes  34.0 Mbits/sec
[1912]  0.0-60.0 sec   243 MBytes  34.0 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.1 sec   239 MBytes  33.3 Mbits/sec  1.524 ms 3045/173095 (1.8%)
[1912] Sent 173095 datagrams
      Iperf 無法完成UDP 長訊息下載測試
      語法:
      C:\>iperf -c 192.168.1.22 -t 60 -i 10 -w 64K -u -b 33M -l 64768
------------------------------------------------------------
Client connecting to 192.168.1.22, UDP port 5001
Sending 64768 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.1.66 port 2780 connected with 192.168.1.22 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  39.4 MBytes  33.1 Mbits/sec
[1912] 10.0-20.0 sec  39.3 MBytes  33.0 Mbits/sec
[1912] 20.0-30.0 sec  39.3 MBytes  33.0 Mbits/sec
[1912] 30.0-40.0 sec  39.4 MBytes  33.1 Mbits/sec
[1912] 40.0-50.0 sec  39.3 MBytes  33.0 Mbits/sec
[1912] 50.0-60.0 sec  39.3 MBytes  33.0 Mbits/sec
[1912]  0.0-60.0 sec   236 MBytes  33.0 Mbits/sec
[1912] WARNING: did not receive ack of last datagram after 10 tries.
[1912] Sent 3823 datagrams
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -- -m 1460
TCP STREAM TEST to 192.168.1.22
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

  8192   8192   1460    60.00      16.21
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -- -s 64K -S 64K -m 1460
TCP STREAM TEST to 192.168.1.22
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 65536  65536   1460    60.00      19.68
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 1472
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.22
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536    1472   60.00      294175      0      57.74
 65536           60.00      170740             33.51
      Netperf 無法完成UDP 長訊息下載測試
      語法:
      C:\>netperf-a4 -H 192.168.1.22 -l 60 -t UDP_STREAM -- -s 64K -S 64K -m 64768
UDP UNIDIRECTIONAL SEND TEST to 192.168.1.22
Socket  Message  Elapsed      Messages
Size    Size     Time         Okay Errors   Throughput
bytes   bytes    secs            #      #   10^6bits/sec

 65536   64768   60.00       10875      0      93.91
 65536           60.00          14              0.12
      回覆時引用此文章 回覆時引用此文章
    9. 2009-07-24, 06:43 PM #29
      FYI
      FYI 目前未上線
      會員
      註冊日期
      2001-06-22
      討論區文章
      7,294

      ARGTEK ARG-U302nA 對傳測試

      SoftAP: ARGTEK ARG-U302nA, 網卡: ARGTEK ARG-U302nA, 距離3.3 公尺, 加密方式: WPA2-PSK-AES

      測試環境:
      (192.168.123.2) PC1 <──無線---- PC2 (192.168.123.1)
      ARGTEK ARG-U302nA 支援1T2R, 理論上可達150Mbps, 實際觀察連線狀態為135Mbps, 此外小弟發現網卡溫度最高之處並非貼有散熱片的晶片, 而是靠近SMA 接頭的L 型內建天線! 待機約60 ℃ (打開外殼測量), 機板正面上有兩個貼片 LED, 可惜外殼並非透明, 希望ARGTEK 能改進

      無線上傳測試結果:
      語法:
      c:\>iperf -c 192.168.123.2 -t 60 -i 10 -l 1460
------------------------------------------------------------
Client connecting to 192.168.123.2, TCP port 5001
TCP window size: 8.00 KByte (default)
------------------------------------------------------------
[1912] local 192.168.123.1 port 1775 connected with 192.168.123.2 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  41.9 MBytes  35.1 Mbits/sec
[1912] 10.0-20.0 sec  41.8 MBytes  35.0 Mbits/sec
[1912] 20.0-30.0 sec  42.0 MBytes  35.2 Mbits/sec
[1912] 30.0-40.0 sec  41.9 MBytes  35.1 Mbits/sec
[1912] 40.0-50.0 sec  41.5 MBytes  34.8 Mbits/sec
[1912] 50.0-60.0 sec  39.9 MBytes  33.5 Mbits/sec
[1912]  0.0-60.0 sec   249 MBytes  34.8 Mbits/sec
      語法:
      c:\>iperf -c 192.168.123.2 -t 60 -i 10 -w 64K -l 1460
------------------------------------------------------------
Client connecting to 192.168.123.2, TCP port 5001
TCP window size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.123.1 port 1776 connected with 192.168.123.2 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  47.2 MBytes  39.6 Mbits/sec
[1912] 10.0-20.0 sec  48.6 MBytes  40.8 Mbits/sec
[1912] 20.0-30.0 sec  49.1 MBytes  41.2 Mbits/sec
[1912] 30.0-40.0 sec  45.3 MBytes  38.0 Mbits/sec
[1912] 40.0-50.0 sec  46.1 MBytes  38.7 Mbits/sec
[1912] 50.0-60.0 sec  47.9 MBytes  40.2 Mbits/sec
[1912]  0.0-60.0 sec   284 MBytes  39.7 Mbits/sec
      語法:
      c:\>iperf -c 192.168.123.2 -t 60 -i 10 -w 1M -l 64240
------------------------------------------------------------
Client connecting to 192.168.123.2, TCP port 5001
TCP window size: 1.00 MByte
------------------------------------------------------------
[1912] local 192.168.123.1 port 1792 connected with 192.168.123.2 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec  93.0 MBytes  78.0 Mbits/sec
[1912] 10.0-20.0 sec   102 MBytes  85.7 Mbits/sec
[1912] 20.0-30.0 sec   103 MBytes  86.4 Mbits/sec
[1912] 30.0-40.0 sec   103 MBytes  86.3 Mbits/sec
[1912] 40.0-50.0 sec   103 MBytes  86.4 Mbits/sec
[1912] 50.0-60.0 sec   103 MBytes  86.2 Mbits/sec
[1912]  0.0-60.1 sec   607 MBytes  84.7 Mbits/sec
      語法:
      c:\>iperf -c 192.168.123.2 -t 60 -i 10 -w 64K -u -b 300M -l 1472
------------------------------------------------------------
Client connecting to 192.168.123.2, UDP port 5001
Sending 1472 byte datagrams
UDP buffer size: 64.0 KByte
------------------------------------------------------------
[1912] local 192.168.123.1 port 1814 connected with 192.168.123.2 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec   108 MBytes  90.9 Mbits/sec
[1912] 10.0-20.0 sec   110 MBytes  92.7 Mbits/sec
[1912] 20.0-30.0 sec   102 MBytes  85.8 Mbits/sec
[1912] 30.0-40.0 sec   102 MBytes  85.8 Mbits/sec
[1912] 40.0-50.0 sec   105 MBytes  88.0 Mbits/sec
[1912] 50.0-60.0 sec   107 MBytes  89.6 Mbits/sec
[1912]  0.0-60.0 sec   635 MBytes  88.8 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.0 sec   635 MBytes  88.8 Mbits/sec  0.591 ms    0/452456 (0%)
[1912] Sent 452456 datagrams
      語法:
      c:\>iperf -c 192.168.123.2 -t 60 -i 10 -w 1M -u -b 300M -l 64768
------------------------------------------------------------
Client connecting to 192.168.123.2, UDP port 5001
Sending 64768 byte datagrams
UDP buffer size: 1.00 MByte
------------------------------------------------------------
[1912] local 192.168.123.1 port 3235 connected with 192.168.123.2 port 5001
[ ID] Interval       Transfer     Bandwidth
[1912]  0.0-10.0 sec   131 MBytes   110 Mbits/sec
[1912] 10.0-20.0 sec   133 MBytes   112 Mbits/sec
[1912] 20.0-30.0 sec   133 MBytes   112 Mbits/sec
[1912] 30.0-40.0 sec   132 MBytes   111 Mbits/sec
[1912] 40.0-50.0 sec   134 MBytes   112 Mbits/sec
[1912] 50.0-60.0 sec   134 MBytes   112 Mbits/sec
[1912]  0.0-60.0 sec   797 MBytes   111 Mbits/sec
[1912] Server Report:
[1912]  0.0-60.0 sec   797 MBytes   111 Mbits/sec  6.030 ms    0/12907 (0%)
[1912] Sent 12907 datagrams
      回覆時引用此文章 回覆時引用此文章
    10. 2009-07-24, 08:03 PM #30
      FYI
      FYI 目前未上線
      會員
      註冊日期
      2001-06-22
      討論區文章
      7,294
      本次測試主角和所使用的工具, 主角包含ARGTEK ARG-U23gA (RTL8187L & RTL8187B), ARGTEK ARG-U302nA, ZyDAS ZD1211B, 5dBi 全向天線, 工具則有TES 1326S 紅外線溫度計, 數位電錶和小弟自製的90° USB 公轉母轉接頭 (VCC 分離)

      小弟並非此方面專家, 純粹湊巧和樓主閒聊, 應樓主之邀, 硬著頭皮弄出這份報告, 小弟自知技巧粗糙, 測試環境不夠統一, 設備也不佳, PC & AP 難登大雅之堂, 所以就不列出了





      此文章於 2009-07-29 02:21 PM 被 FYI 編輯。
      回覆時引用此文章 回覆時引用此文章
    « 上一個主題 | 下一個主題 »

    類似的主題

    1. 崴海王 驅動支援 windows 7 但軟體卻不支援..
      作者：5566fan 所在討論版：-- 無 線 網 路 版
      回覆: 2
      最後發表: 2009-12-06, 02:03 AM
    2. 【崴海王】無線網卡第二波團購
      作者：wifilink-tw 所在討論版：-- 無 線 網 路 版
      回覆: 132
      最後發表: 2009-09-21, 05:50 PM
    3. 【崴海王】無線網卡-不專業測試篇
      作者：vnwap 所在討論版：-- 無 線 網 路 版
      回覆: 11
      最後發表: 2009-04-30, 01:08 PM
    4. 崴海王無線網卡簡易測試
      作者：henrychen 所在討論版：-- 無 線 網 路 版
      回覆: 4
      最後發表: 2009-04-23, 12:33 PM
    5. 【崴海王】無線網卡 使用心得
      作者：pavo 所在討論版：-- 網 路 硬 體 版
      回覆: 0
      最後發表: 2009-03-20, 12:03 PM

    　

    ARGtek天線套件

    書籤

    發表文章規則

    • 您不可以發表新主題
    • 您不可以回覆文章
    • 您不可以上傳附加檔案
    • 您不可以編輯自己的文章
    •  

    討論版規則