啥米是"Universal Repeater 無線延伸訊號中繼模式"?
在這個網頁看到下列的軔體更新:
[url]http://www.aximcom.com/index.php?option=com_docman&task=cat_view&gid=59&Itemid=59[/url]
Firmware (v 1.7.6)hot! 09/05/2008 Hits: 307
Release Note:
1
Added the multiplue-SSID support and advanced settings.
2
Added the wireless universal repeater support.
3
Added the manual NTP server setting.
4
GUI UTF-8 support
5
Fixed the wireless LED display issue based on the wireless is disabled/enabled.
Release Note (Chinese):
1 新增雙 SSID 無限設定以及進階設定
2 新增Universal Repeater 無線延伸訊號中繼模式
3 新增自訂網路時間伺服器位置支援
4 支援多國語言顯示 UTF-8
5
�修正無線網路燈號問題
請問 "Universal Repeater 無線延伸訊號中繼模式" 跟 "WDS" 有啥不一樣的地方啊?
回覆: 啥米是"Universal Repeater 無線延伸訊號中繼模式"?
WDS 需要登錄 MAC address
Universal Repeater 不需登記 MAC
看3rd party fireware 說明會比較清楚
[URL="http://en.wikipedia.org/wiki/Wireless_Distribution_System"]WDS[/URL]
[URL="http://www.dd-wrt.com/wiki/index.php/Universal_Repeater"]Universal Repeater[/URL]
回覆: 啥米是"Universal Repeater 無線延伸訊號中繼模式"?
看起來, Universal Repeater 的設定比 WDS 簡單許多! 單邊設定就可以搞定了. 另外有種說法是 WDS 的速度比 AP<-->Client 這樣的連結速度慢!
回覆: 啥米是"Universal Repeater 無線延伸訊號中繼模式"?
謝謝 FYI 兄的資料
小弟覺得 DD-WRT 把事情複雜化了(universal repeater 跟 repeater bridge 看起來是一樣的)
Universal Repeater 應該是一台基地台上面, 除了 AP 之外 (SSID) 虛擬出一個 client (STA) 也就是AP 與 STA 同時候在同一台基地台發生.
ADSL <==> AP 1 (AP mode) <==> (sta mode) AP2 (AP mode) <==> 一般的 client (sta mode)
透過 AP <===> STA | AP (同一台)<==> STA 來作無線的串接
相較一下 WDS 是這樣連的
AP1 (WDS) <====> (WDS) AP2
兩台都需要在 AP mode
另外一個是速度的問題, 例如 AP <==> STA 這樣的聯法應該有到 11n 的速度, 但是 WDS 的 AP <==> AP 就不知道有沒有 11n 了. 要請各問先進解答!
ps. 我也會弄台有 universal repeater 來玩玩 :D
回覆: 啥米是"Universal Repeater 無線延伸訊號中繼模式"?
FYI 兄,
半夜 5 點回信真是厲害! 精力旺盛呢!
WDS repeater 與 WDS bridge 的差別已經在你給的 wikipedia 寫的很清楚了
[COLOR="Blue"]WDS can be used to provide two modes of wireless AP-to-AP connectivity:
* Wireless Bridging in which WDS APs communicate only with each other and don't allow wireless clients or Stations (STA) to access them
* Wireless Repeating in which APs communicate with each other and with wireless STAs[/COLOR]
也就是說 WDS repeater mode 也是 一顆 AP, STA 可以連上
WDS bridge mode 是一顆 AP, STA 連不上, 也就是這顆 AP 專門作 WDS
要區分出是不是花招看一下 AP 實做的 interface 就知道
以 broadcom 來說 wl0 是跑 primary AP 的 state machine
wl0.1 在 DD-WRT repeater mode 是跑 STA 的 state machine
用 brctl show br0 你就可以看到 wl0 與 wl0.1 是 bridge 在一起的
br0-> wl0 (AP)
-> wl0.1 (STA)
在 client mode 的時候 wl0 是跑 STA 的 state machine, br0 是 LAN (vlanX) 跟 wl0 bridge 在一起的.
br0 -> wl0 (STA)
-> vlanX (ethernet)
你講的有沒有分網段是 layer 3 (IP 層)的問題
就看你需不需要用 brctl bridge 在一起, 如果不 bridge, 就要跑 NAT or routing. DD-WRT 的名詞有點搞得糊塗!
回覆: 啥米是"Universal Repeater 無線延伸訊號中繼模式"?
我大概搞懂了
一般市面上的 AP wireless repeater/bridge 都是用 WDS 模式做的
Universal Repeater 是用虛擬出一張 STA (client) 的介面來作橋接
Universal Repeater 不是宣傳的噱頭
他在實際應用上面應該是比 WDS 好用
我想 universal 這個字眼是說... 只要對方是 AP
就可以跟他橋接