請問要如何才能執行MAYA3.0?

**ajack** · 2000-12-14, 01:31 PM

我是一個maya的初學者,我安裝完maya3.0後卻啟動時出現了
cannot find any aw *.dat in c:\filexlm please see
installing guide for eroubleshooting details
請問一下有誰知道要如何才能執行?謝謝!

**rEdS** · 2000-12-25, 12:25 PM

Installing Maya3

run autorun.exe
click install maya
choose to install maya unlimited (why go for less)
skip the license installation, doing it by hand is so much more fun...

Installing a Maya3 floating license server:

overwrite c:\aw\com\etc\sgiawd.exe with the provided harvest sgiawd.exe

open the provided aw1.dat in your favorite texteditor, edit the part that says <your computer> to the name of your machine (in doubt, run "hostname" in a cmd prompt).
if you have other flexlm servers running, port 744 might be taken allready and you can put a different port in the SERVER line.
edit the path for sgiawd.exe to where you installed it.

save the file as c:\flexlm\aw_servername.dat (this MUST be on the c: drive)
- where servername again is replaced with the name of your computer

run c:\aw\com\bin\lmtools.exe (or from whatever drive you installed maya to)

check "configuration using services"
select the "configure services" tab

enter a Service Name (maya3flex for example)
click next to each of the path fields to browse for your file locations

c:\AW\COM\etc\lmgrd.exe
C:\FLEXlm\aw_servername.dat
C:\FLEXlm\aw_servername.log (if the file is not allready there, just enter the path)

check "use services" and "start server at powerup" if you want to start up the license server when you start windows
click "Save Service" - and "Yes"
go to the "Start/Stop/Reread" tab
select the maya3flex service you just created and click "Start Server"

all this flex stuff offcause won't work if you don't have the TCP/IP stack running - the MS loopback driver is fine if you don't have a network card.

Have Phun!