【求助】用TMPGEnc Plus無法開啟AVI檔

[yslo88]

小弟是使用TMPGEnc Plus V2.54.37.135來轉AVI到VCD,但在Project Wizard (2/5)步驟選擇Source File時開不了檔案,會出現以下錯誤

File"I:\[Private]Private Life of Kate More.avi" can not open, or unsupported.

這個AVI檔可以用Media Player Classic正常播放........
因為是AV影片,所以沒字幕的問題,但大部分的AVI檔都無法開
已爬過數個論壇的文,望能請各位大大先進.....幫小弟解疑一下嗎????.....十分感謝

[舞波優希]

老樣子您到底用哪些編解碼....
還有能看不代表能壓制....

[SaySayLiam]

Option -->
Environment Setting -->
VFAPI plugIn -->

"立用滑鼠右鍵 將DirectShowxxxx的Priority 拉到最高"

不行再說 : )

[yslo88]

最初由 舞波優希 發表
老樣子您到底用哪些編解碼....
還有能看不代表能壓制....

我是安裝K-LITE CODEC PACK 2.27 FULL解碼包

[yslo88]

最初由 SaySayLiam 發表
Option -->
Environment Setting -->
VFAPI plugIn -->

"立用滑鼠右鍵 將DirectShowxxxx的Priority 拉到最高"

不行再說 : )

我本來就有把DirectShow Multimedia File Reader的優先權拉到最高,
因我有轉過無間道II DVDrip的AVI檔,能成功轉檔(使用一樣的程式和編碼包),也成功的燒成DVD可在家用DVD Player上播放,也轉過明天過後的AVI,都能正常轉換.... >.<

[舞波優希]

http://forums.afterdawn.com/thread_view.cfm/40101
在網路上找到的....
不過總覺得用K-lite裡面的GSpot來觀看該影片何編碼比較恰當

[doz]

小弟的作法也是會先用GSpot看一下編碼
再上網找相容的code..
小弟現在用的是ATB2.0
之前影片是Xvid的都不能看..
也是用GSpot才知道ATB不支援的..

[yslo88]

最初由 舞波優希 發表
http://forums.afterdawn.com/thread_view.cfm/40101
在網路上找到的....
不過總覺得用K-lite裡面的GSpot來觀看該影片何編碼比較恰當

小弟依足了大大提供的網頁上的作法,如下所說的方法:
There are 3 possible fixes for this error! Sometimes it is simply because you dont have the proper codecs installed! However, you can download GSpot and check the file to see what codecs are required to play it!

Sometimes it can also be solved by raising the priority of DirectShow Multimedia File Reader. This is dont simply by clicking option - environmental setting. Click the VFAPI plug-in tab. You will see DirectShow in the list usually with a priority of -1. Right click on the NAME (not the priority) and click higher priority until the priority is 2 and it is at the top of the list.

And finally, the most sucessful fix for this problem has been to decompress the audio in the avi file before encoding. You can do this with VirtualDUB.

1. Click Video - Direct Stream Copy.
2. Click Audio - Full Processing Mode.
3. Click Audio - Compression. Select <No compression (PCM)> and click ok!
4. Click File - Save AVI and try it with TMPGEnc.

但還是不行....... 真的是難倒我了......