不論是 Supermicro X8SIL-F 還是 X8SI6-F
都至少需使用 ECC 記憶體的樣子…不然不開機 OTL


沒這回事吧:jump2:
LGA1156/1366支援啥RAM是看CPU臉色的
裝Intel® Xeon® X3400 / L3400 series的話
CPU是支援Registered、Unbuffered ECC、non-ECC

贊助商連結

DDR3 dram 通常有三種規格

ECC Unbuffered Memory DDR3 一般用的 Unbuffered DDR3 最大只能裝到48 GB 原廠出機通常都配這

ECC Registered Memory RDIMM DDR3 才能裝到上限192 GB 二種DRAM不可混用

另外一般家用機就是 no -ECC Unbuffered Memory DDR3

LGA1156/1366支援啥RAM是看Bios 臉色比較對

像我手上HP ML150 G6 可以裝 一般 no-ecc unbuffer 到48GB DRAM
但是Apple Mac Pro 確只吃ECC DDR3 (晶片組可都是一樣)
我是真的不太買S牌版子 通常我要去價 買品牌Server 價格都還不錯
(應該是把二三線敞電得很慘)

不過品牌server 如果亂搞起來 會比diy 設備還要diy ...很多料件 要就自己亂改 要嗎就國外訂

沒這回事吧:jump2:
LGA1156/1366支援啥RAM是看CPU臉色的
裝Intel® Xeon® X3400 / L3400 series的話
CPU是支援Registered、Unbuffered ECC、non-ECC



LGA1156/1366支援啥RAM是看Bios 臉色比較對


原本我也是以為自從intel把記憶體控制器做進CPU後，
支援什麼記憶體應該是看U來做決定…
直至前天查到這篇：Supermicro X8SIL-F Motherboard Review (http://www.servethehome.com/supermicro-x8silf-motherboard-v102-review-whs-v2-diy-server/)

On actual memory compatibility, I tried on Patriot DDR3 1600MHz C9 set, a Corsair Dominator GT DDR3 1600 C7 set, a G.Skill Ripjaws DDR3 1600MHz C9 set, and another G.Skill DDR3 1600MHz set. All four types of memory I tried had a minimum sample size of four 2GB sticks of and all were non-ECC memory. Not a single one worked as I was greeted with a long beep. This seemed odd since I was moving the memory from H55, H57, and P55 platforms, using the same i3-530 and i5-650 CPUs, and having the modules not work in the X8SIL-F rev 1.01 and rev 1.02. My conclusion was to stop fighting and acquiesce to follow Supermicro’s guidelines.
When I asked Supermicro about the memory issue, they suggested that all of those kits may be x8 rank kits. I will say, with consumer grade kits, it is difficult to tell from marketing material if they are x4 or x8 rank DIMMs. I ended up purchasing two 4GB kits of Kingston ECC 1333MHz DDR3 KVR1333D3E9SK2/4G (which are x8 rank) and they work perfectly in the X8SIL-F. The lesson here is that one should abide by Supermicro’s memory guidelines for the X8SIL-F.

確定Supermicro的Server Board是不支援non-ECC unbuffered的DDR3記憶體…

因此，昨天便直接去光華下手抽了張A牌H55的板子回家了 OTL