Lilo的問題 大家好,灌了Linux Redhat 7.0和win 2000後,Lilo的選單會出現Linux和Dos這兩個選項,有什麼方法可以讓Dos改成windows嗎??還有Lilo等待時間只有5秒而已,可以讓他的時間長一點嗎?請各位高手幫忙一下,謝謝。 (我的linux是文字模式安裝的):confused: |
應該是這個/etc/lilo.conf timeout=xx xx單位為秒 label=xxxx xxxx為你想要的名稱.. |
再請問一下,該如何更改設定值呢?(就是名稱和時間)小弟剛接觸linux,有很多地方不懂,懇請高手指教,謝謝。 |
學unix 之前,一定要先學好 vi Vbird兄的網站有很精采的文章.. [url]http://aerosol.ev.ncku.edu.tw/~vbird/linux/linux_07vi.html[/url] |
或是ee 我絕得ee也不錯用可惜是FreeBSDㄉ mc也艇方便ㄉ |
[QUOTE][i]最初由 repsol 發表[/i] [B]應該是這個/etc/lilo.conf timeout=xx xx單位為秒 [/B][/QUOTE] 疑?單位不是1/10秒嗎? |
[QUOTE][i]最初由 rockke 發表[/i] [B] 疑?單位不是1/10秒嗎? [/B][/QUOTE] 謝謝rockke的指正...我剛剛查了一文件 的確是1/10秒為單位..下面的URL有提到 [url]http://www.redhat.com/docs/manuals/linux/RHL-7.2-Manual/ref-guide/s1-boot-init-shutdown-booting.html[/url] timeout=50 sets the amount of time that LILO will wait for user input before proceeding with booting the default line entry. This is measured in tenths of a second, with 50 as the default. |
[QUOTE][i]最初由 repsol 發表[/i] [B]應該是這個/etc/lilo.conf timeout=xx xx單位為秒 label=xxxx xxxx為你想要的名稱.. [/B][/QUOTE] 最後在檔案存完檔後,要執行 lilo -v ,使設定生效,如果有參數設定錯誤,就會顯示出來. |
[QUOTE][i]最初由 repsol 發表[/i] [B] 謝謝rockke的指正...我剛剛查了一文件 的確是1/10秒為單位..下面的URL有提到 [url]http://www.redhat.com/docs/manuals/linux/RHL-7.2-Manual/ref-guide/s1-boot-init-shutdown-booting.html[/url] timeout=50 sets the amount of time that LILO will wait for user input before proceeding with booting the default line entry. This is measured in tenths of a second, with 50 as the default. [/B][/QUOTE] 我也只是剛好今天開始學Linux,在書上看到的啦~~ :p 有交流才有進步:D |
還有一些 Lilo 的問題,我稍微彙整了一下,歡迎大家參考看看: [url]http://pc510.ev.ncku.edu.tw/~vbird/forums/viewtopic.php?topic=451&forum=7&4[/url] |
所有時間均為 +8。現在的時間是 06:04 PM。 |
XML | RSS 2.0 | RSS |
本論壇所有文章僅代表留言者個人意見,並不代表本站之立場,討論區以「即時留言」方式運作,故無法完全監察所有即時留言,若您發現文章可能有異議,請 email :[email protected] 處理。