ATT40@@看了差點昏到＠＠

感謝樓主分享!更新後一切正常!~

以下是這一版 firmware 的開機訊息, 標示紅色底線處是這一版 firmware 的編譯完成時間...

CFE version 1.0.37-5.5 for BCM96345 (32bit,SP,BE)
Build Date: Fri Dec 19 09:54:12 PST 2003 (root@cfe-build-linux)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
CPU type 0x28000: 140MHz

Total memory used by CFE: 0x80401000 - 0x80521200 (1180160)
Initialized Data: 0x8041BDC0 - 0x8041D610 (6224)
BSS Area: 0x8041D610 - 0x8041F200 (7152)
Local Heap: 0x8041F200 - 0x8051F200 (1048576)
Stack Area: 0x8051F200 - 0x80521200 (8192)
Text (code) segment: 0x80401000 - 0x8041BDBC (110012)
Boot area (physical): 0x00522000 - 0x00562000
Relocation Factor: I:00000000 - D:00000000

Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm96345_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id Name : 96345R_EPT
Psi size in KB : 16
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:03:c9:xx:xx:xx
Ethernet PHY Type : External Not Using Reverse MII
Memory size in MB : 8

*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 110
Code Address: 0x80010000, Entry Address: 0x8001046c
Decompression OK!
Entry at 0x8001046c
Closing network.
Starting program at 0x8001046c
Total Flash size: 2048K with 35 sectors
Scratch pad is not used for this flash part.
96345R_EPT prom init
CPU revision is: 00028000
Primary instruction cache 8kb, linesize 16 bytes (2 ways)
Primary data cache 4kb, linesize 16 bytes (2 ways)
[U][COLOR=red]Linux version 2.4.17 (root@hp) (gcc version 3.1) #1 三 7月 27 14:02:36 CST 2005[/COLOR][/U]
Determined physical RAM map:
memory: 007a0000 @ 00000000 (usable)
On node 0 totalpages: 1952
zone(0): 1952 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock0 ro
bcm_console_setup
Calibrating delay loop... 92.97 BogoMIPS
Memory: 6240k/7808k available (1090k kernel code, 1568k reserved, 76k data, 40k init, 0k highmem)
Dentry-cache hash table entries: 1024 (order: 1, 8192 bytes)
Inode-cache hash table entries: 512 (order: 0, 4096 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
[U][COLOR=red]Module bcm6345_cons.c v1.1 Jul 27 2005 14:02:52[/COLOR][/U]
brcmboard: brcm_board_init entry
block: 64 slots per queue, batch=16
PPP generic driver version 2.4.1
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Ebtables v2.0 registered<6>NET4: Ethernet Bridge 008 for NET4.0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 40k freed

init started: [U][COLOR=red]BusyBox v0.60.4 (2005.07.27-06:07+0000) multi-call binary[/COLOR][/U]
Algorithmics/MIPS FPU Emulator v1.5


[U][COLOR=red]BusyBox v0.60.4 (2005.07.27-06:07+0000) Built-in shell (msh)[/COLOR][/U]
Enter 'help' for a list of built-in commands.

我是中華12M/1M 的使用AR4031B 更新韌體後的數據
可以請大大幫我看看 要不要報修,我這裡距離機房只有500公尺
謝謝

[QUOTE=u826038]我是中華12M/1M 的使用AR4031B 更新韌體後的數據
可以請大大幫我看看 要不要報修,我這裡距離機房只有500公尺
謝謝[/QUOTE]
上傳的速率好像不對!

沒什麼對不對, 8M及12M都是由數據機和機房的設備依線路訊號品質自行協調出來的速率,
新的韌體似乎都是以連線穩定來調整, 不再衝高速率以免反而使得封包錯誤率上升, 連線不穩.

[QUOTE=wulala]沒什麼對不對, 8M及12M都是由數據機和機房的設備依線路訊號品質自行協調出來的速率,
新的韌體似乎都是以連線穩定來調整, 不再衝高速率以免反而使得封包錯誤率上升, 連線不穩.[/QUOTE]

就實際使用來看，新的韌體速度比之前還慢
像我超距使用12M，之前是HEC ERROR一段時間就累積破百
但目前使用這版，雖然速度少了些，至少HEC ERROR都不太會增加
與其帳面上的數字好看，我還比較滿意目前這種連線品質

我也更新後

一切正常!~

速度值雖然沒有之前這麼美

但是傳輸品質似乎穩定多了

使用dumeter 觀察, 更版後曲線比之前版本 平滑多了

沒錯
這版對於一些距離比較遠的反而有幫助
或者連線品質較差的用者 會提昇穩定

但是假如原來速度不錯的 使用這版反而速率會降下來

並且開機時間會偵測比較久

謝謝大大分享哦，不知是不適合南區使用呢