http://168.95.5.100/usertmp/1089725891.22941/1.rar
(此為 Hinet Mail 的空間.... Hinet Web Mail bug 離線後 附件的網址還可以抓 ^^ 免費的 50MB 空間)


這個破解檔聽說是我學弟做出來的 (崑山資管)
有需要的人可以測試看看

只要把四個檔案 覆至過去就可以了

以下是安裝檔的說明

* 在安裝中按 _接受=>安裝=>全部皆是=> 是=>確定_ 後重新登入即可。*
《說明》微軟自從Windows 2000系統 開始，就將硬體設定檔封鎖住了， 就因如此，造成許多人的困擾，所以本人我就將這套破解檔提供出來.。
《操作》使用Windows系統的人，只要將此程式灌入後，選我的電腦→ 按右鍵內容→硬體→硬體設定檔→複製(可重新命名)→過來再重新開機 就可以了。到時你的硬碟，就可以在不同的電腦主機中來去自如了^^
《 PS 》剛開作系統時，選擇CPU等級較低如P3開始作起， 從低認硬體致高等級。這樣才不會失敗喔，切記!!

有些人的 SP 等級不同，所以那四個檔案的取得位置也有所不同...
必須從 SPx.CAB 中取得，比較不會有問題...

另外如果可以的話，建議更改標題，別用到破解這兩個字...:)

http://www.mostlycreativeworkshop.com/article11.html

Now, for people that understand what they are doing, and how to do it, here are the "quick" steps:
1 - Extract 'Atapi.sys,' 'Intelide.sys,' 'Pciide.sys,' and 'Pciidex.sys' from '%SystemRoot%\Driver Cache\i386\Driver.cab' (or SPx.CAB if it exists, where x is the latest service pack)
2 - Copy those four files to the following location: '%SystemRoot%\System32\Drivers' (do not replace files already there)
3 - Merge the registry file found below (copy the text to notepad and save as a .reg file), or better, download it here
4 - THAT'S IT! Move it to the new system (or change the motherboard), and your system should start up.

STEP BY STEP INSTRUCTIONS FOR THOSE THAT NEED IT:
1 - Click START, go to RUN, type in "CMD" (without quotes), hit ENTER
2 - At the command prompt, type in:
"CD %SystemRoot%\Driver Cache\i386" (without quotes) hit ENTER
"dir/w" (without quotes) hit ENTER
If you are running Windows 2000, check for SPx.CAB (where x is the highest number), in the following steps, use the SPx.CAB instead of DRIVER.CAB
(If you are asked to OVEBWRITE any file, choose NO)
"expand driver.cab -f:atapi.sys %SystemRoot%\System32\Drivers" (without quotes) hit ENTER
"expand driver.cab -f:intelide.sys %SystemRoot%\System32\Drivers" (without quotes) hit ENTER
"expand driver.cab -f:pciide.sys %SystemRoot%\System32\Drivers" (without quotes) hit ENTER
"expand driver.cab -f:pciidex.sys %SystemRoot%\System32\Drivers" (without quotes) hit ENTER
"exit" (without quotes) hit ENTER
3 - You should now be back at the Desktop, you need to download the registry file from HERE, save it to someplace you will remember, preferably your desktop. After it is downloaded, DOUBLE-CLICK on it, you will be asked if you wish to MERGE the contents with you registry, CHOOSE YES.
4 - THAT'S IT! Your system is prepared to be moved to another system/have the motherboard changed.

之前就有討論過啦!!
把裝置管理員裡的某幾個item remove or rename 就可以來去自如了阿!!

最初由 anson lin 發表
之前就有討論過啦!!
把裝置管理員裡的某幾個item remove or rename 就可以來去自如了阿!!
請問一下我也有硬體我的是nt系統
要解可以說一下之前的方法嗎


請改掉使用注音文的習慣，下次直接砍文不另通知。