wimiu
2003-05-11, 11:15 PM
最近電腦問題連連,一直懷疑是 記憶體 的問題...
---------------------------------------------
記憶體剛買不久
A-DATA 512MB DDR400 *2
---------------------------------------------
如安裝OS時,調333mhz 5-2-2-2.0 或 400mhz 5-3-2-2.0
才不會有某某檔案不能複製~~~
原先很不爽買到爛記憶體.....
但到今天在操作Server 2003時,系統在某些部分突然很慢...
(如:開啟"我的電腦",在IE下選我的最愛的選單..
Nero開不起來(偵測到IDE/SCSI bus時停住了) 等等 )
我開始懷疑是否是硬碟的問題?? (此時記憶體調333mhz 5-2-2-2.0)
用Seagate Tool 測硬碟在General模式下
測到 [File Structure Test] 時,Partition 1,2 都 Failed (我分C,D槽)
上面寫說means data file structure errors
這是指什麼意思...??
附代一下之後訊息
------------------------------------------------
dt.failp[iTemp]=2
dt.passp[iTemp]=0,
dt.passmp[iTemp]=0,
tempNumDosPart=2
------------------------------------------------
產生的文件檔
------------------------------------------------
Seagate
V1.06 ENGLISH 00000000 000
report file created 05/11/2003 @ 7:26 PM
The following information has been generated by
The generic diagnostic. We hope this information
will help you recognize and resolve potential data access problems
in a timely manner.
* Test results indicate there was not a problem with a drive on your
system.
This information describes your system and drives.
Processor Intel Pentium Pro or equivalent
BIOS Date 03/17/03
Conventional Memory size 640
Extended Memory size 1047488
IO Channel type PCI
------
CMOS: AT-Style Drive1=47, Drive2=0 (Drive Tables not located)
There was 1 hard disk drive detected:
DISK SIZE MODEL
---- ------- -----
1 40023 MB ST340016A
Serial Number: 3HS18F29
CommandSet = XBIOS, RECIO, 1K, 2K, EXT13, PORTEDIO
Int13 Num = 80, MAX CHS = 4865x255x63, PHYS CHS = 65535x16x63.
ParmTable CHS,Rsvd = 0x0x0, 00
Interface = ATA
Configmode = 0, Translator Mode=0
MultiSec=16, BufferSize=4096, Capabilities=2F00
Security = 0001, IDECommandSet = 346B4B01
Partition Cylinder Size
# Type Start End MB
1 FAT 32 0 930 7658.1
2 EXTENDED 931 4864 32360.3
- FAT 32 931 4864 32360.2
Diagnostic Results:
Disk 1 Quick Test Result: NO ERRORS
Disk 1 SMART Test Result: Passed
Disk 1 Surface Test Result: NO ERRORS
S.M.A.R.T., (S)elf (M)onitoring (A)nalysis and (R)eporting
(T)echnology, a built-in hard disk drive failure prediction method
reports an 'Alert' if a problem has occurred. It reports 'Passed'
if no problems are found and 'Unsupported' if a hard disk drive
does not support S.M.A.R.T.
Partition Check Results
Drive 1 Partitions:
Partition 1 Result: FAILED
15 CRITICAL STRUCTURE ERROR(S), 501 NON-CRITICAL STRUCTURE ERROR(S).
3579726 KBytes in 12020 files.
528 directories were found.
359238 KBytes in 3462 deleted files.
0 deleted directories were found.
ERROR SUMMARY:
Invalid Entry Name 15
Orphaned Data Blocks 501
Partition 2 Result: FAILED
254 CRITICAL STRUCTURE ERROR(S), 501 NON-CRITICAL STRUCTURE ERROR(S).
14733550 KBytes in 9697 files.
477 directories were found.
4074302 KBytes in 1910 deleted files.
69 deleted directories were found.
ERROR SUMMARY:
Invalid Entry Name 254
Orphaned Data Blocks 501
*********************************************
DIAGNOSTIC RESULTS:
Drive 1 (ST340016A)
-Passed all physical tests
-Several partitions failed the File
Structure Test
RECOMMENDATIONS:
-If you have data to recover, see
the readme.txt file for information.
-If you have NOT lost data, use normal
system tools to repair the errors.
-Running the generic diagnostic regularly
will help to monitor your hard disk
drive and safeguard your data.
Use of the diagnostic and this information is controlled by the
license agreement included with the SeaTools Disc Diagnostic
software product. Any use for commercial or financial gain, including
but not limited to, use in performing technical, consulting or data
recovery services is prohibited without the prior written approval
of Seagate Technology LLC
Copyright (c) 1999-2002 Seagate Technology LLC
---------------------------------------------
記憶體剛買不久
A-DATA 512MB DDR400 *2
---------------------------------------------
如安裝OS時,調333mhz 5-2-2-2.0 或 400mhz 5-3-2-2.0
才不會有某某檔案不能複製~~~
原先很不爽買到爛記憶體.....
但到今天在操作Server 2003時,系統在某些部分突然很慢...
(如:開啟"我的電腦",在IE下選我的最愛的選單..
Nero開不起來(偵測到IDE/SCSI bus時停住了) 等等 )
我開始懷疑是否是硬碟的問題?? (此時記憶體調333mhz 5-2-2-2.0)
用Seagate Tool 測硬碟在General模式下
測到 [File Structure Test] 時,Partition 1,2 都 Failed (我分C,D槽)
上面寫說means data file structure errors
這是指什麼意思...??
附代一下之後訊息
------------------------------------------------
dt.failp[iTemp]=2
dt.passp[iTemp]=0,
dt.passmp[iTemp]=0,
tempNumDosPart=2
------------------------------------------------
產生的文件檔
------------------------------------------------
Seagate
V1.06 ENGLISH 00000000 000
report file created 05/11/2003 @ 7:26 PM
The following information has been generated by
The generic diagnostic. We hope this information
will help you recognize and resolve potential data access problems
in a timely manner.
* Test results indicate there was not a problem with a drive on your
system.
This information describes your system and drives.
Processor Intel Pentium Pro or equivalent
BIOS Date 03/17/03
Conventional Memory size 640
Extended Memory size 1047488
IO Channel type PCI
------
CMOS: AT-Style Drive1=47, Drive2=0 (Drive Tables not located)
There was 1 hard disk drive detected:
DISK SIZE MODEL
---- ------- -----
1 40023 MB ST340016A
Serial Number: 3HS18F29
CommandSet = XBIOS, RECIO, 1K, 2K, EXT13, PORTEDIO
Int13 Num = 80, MAX CHS = 4865x255x63, PHYS CHS = 65535x16x63.
ParmTable CHS,Rsvd = 0x0x0, 00
Interface = ATA
Configmode = 0, Translator Mode=0
MultiSec=16, BufferSize=4096, Capabilities=2F00
Security = 0001, IDECommandSet = 346B4B01
Partition Cylinder Size
# Type Start End MB
1 FAT 32 0 930 7658.1
2 EXTENDED 931 4864 32360.3
- FAT 32 931 4864 32360.2
Diagnostic Results:
Disk 1 Quick Test Result: NO ERRORS
Disk 1 SMART Test Result: Passed
Disk 1 Surface Test Result: NO ERRORS
S.M.A.R.T., (S)elf (M)onitoring (A)nalysis and (R)eporting
(T)echnology, a built-in hard disk drive failure prediction method
reports an 'Alert' if a problem has occurred. It reports 'Passed'
if no problems are found and 'Unsupported' if a hard disk drive
does not support S.M.A.R.T.
Partition Check Results
Drive 1 Partitions:
Partition 1 Result: FAILED
15 CRITICAL STRUCTURE ERROR(S), 501 NON-CRITICAL STRUCTURE ERROR(S).
3579726 KBytes in 12020 files.
528 directories were found.
359238 KBytes in 3462 deleted files.
0 deleted directories were found.
ERROR SUMMARY:
Invalid Entry Name 15
Orphaned Data Blocks 501
Partition 2 Result: FAILED
254 CRITICAL STRUCTURE ERROR(S), 501 NON-CRITICAL STRUCTURE ERROR(S).
14733550 KBytes in 9697 files.
477 directories were found.
4074302 KBytes in 1910 deleted files.
69 deleted directories were found.
ERROR SUMMARY:
Invalid Entry Name 254
Orphaned Data Blocks 501
*********************************************
DIAGNOSTIC RESULTS:
Drive 1 (ST340016A)
-Passed all physical tests
-Several partitions failed the File
Structure Test
RECOMMENDATIONS:
-If you have data to recover, see
the readme.txt file for information.
-If you have NOT lost data, use normal
system tools to repair the errors.
-Running the generic diagnostic regularly
will help to monitor your hard disk
drive and safeguard your data.
Use of the diagnostic and this information is controlled by the
license agreement included with the SeaTools Disc Diagnostic
software product. Any use for commercial or financial gain, including
but not limited to, use in performing technical, consulting or data
recovery services is prohibited without the prior written approval
of Seagate Technology LLC
Copyright (c) 1999-2002 Seagate Technology LLC