最初由 噩夢 發表
我是抓我的ADSL主機Zyxel 642r的snmp,我執行cfgmaker的時候沒什麼錯誤訊息~~
然後在我的Win2k pro上面裝上snmp的服務,抓出來的結果也一樣...
真的是快瘋了... :~~~~~~
把你 2000 MRTG 的 .cfg 貼出來看看.

# Created by
# cfgmaker [email protected] --global 'WorkDir: c:\appserv\www\mrtg' --output website.cfg


### Global Config Options

# for UNIX
# WorkDir: /home/http/mrtg

# or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

# to get bits instead of bytes and graphs growing to the right
Options[_]: growright, bits
language: big5

######################################################################
# System: WEBSITE
# Description: Hardware: x86 Family 6 Model 11 Stepping 1 AT/AT COMPATIBLE - Software: Windows 2000 Version 5.0 (Build 2195 Uniprocessor Free)
# Contact:
# Location:
######################################################################


### Interface 1 >> Descr: 'MS-TCP-Loopback-interface' | Name: '' | Ip: '127.0.0.1' | Eth: '' ###
### The following interface is commented out because:
### * it is a Software Loopback interface
#
# Target[192.168.1.3_1]: 1:[email protected]:
# SetEnv[192.168.1.3_1]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="MS-TCP-Loopback-interface"
# MaxBytes[192.168.1.3_1]: 1250000
# Title[192.168.1.3_1]: Traffic Analysis for 1 -- WEBSITE
# PageTop[192.168.1.3_1]: <H1>Traffic Analysis for 1 -- WEBSITE</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>WEBSITE in </TD></TR>
# <TR><TD>Maintainer:</TD> <TD></TD></TR>
# <TR><TD>Description:</TD><TD>MS-TCP-Loopback-interface </TD></TR>
# <TR><TD>ifType:</TD> <TD>softwareLoopback (24)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s</TD></TR>
# <TR><TD>Ip:</TD> <TD>127.0.0.1 (website)</TD></TR>
# </TABLE>


### Interface 16777219 >> Descr: 'Realtek-8139-series-PCI-NIC' | Name: '' | Ip: '192.168.1.3' | Eth: '00-30-1b-0b-1e-31' ###

Target[192.168.1.3_16777219]: 16777219:[email protected]:
SetEnv[192.168.1.3_16777219]: MRTG_INT_IP="192.168.1.3" MRTG_INT_DESCR="Realtek-8139-series-PCI-NIC"
MaxBytes[192.168.1.3_16777219]: 1250000000
Title[192.168.1.3_16777219]: Traffic Analysis for 16777219 -- WEBSITE
PageTop[192.168.1.3_16777219]: <H1>Traffic Analysis for 16777219 -- WEBSITE</H1>
<TABLE>
<TR><TD>System:</TD> <TD>WEBSITE in </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>Realtek-8139-series-PCI-NIC </TD></TR>
<TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD> <TD></TD></TR>
<TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>192.168.1.3 (website)</TD></TR>
</TABLE>


### Interface 33554436 >> Descr: 'WAN-(PPP/SLIP)-Interface' | Name: '' | Ip: '211.74.180.25' | Eth: '00-53-45-00-00-00' ###

Target[192.168.1.3_33554436]: 33554436:[email protected]:
SetEnv[192.168.1.3_33554436]: MRTG_INT_IP="211.74.180.25" MRTG_INT_DESCR="WAN-(PPP/SLIP)-Interface"
MaxBytes[192.168.1.3_33554436]: 1250000000
Title[192.168.1.3_33554436]: Traffic Analysis for 33554436 -- WEBSITE
PageTop[192.168.1.3_33554436]: <H1>Traffic Analysis for 33554436 -- WEBSITE</H1>
<TABLE>
<TR><TD>System:</TD> <TD>WEBSITE in </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>WAN-(PPP/SLIP)-Interface </TD></TR>
<TR><TD>ifType:</TD> <TD>ppp (23)</TD></TR>
<TR><TD>ifName:</TD> <TD></TD></TR>
<TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>211.74.180.25 (swtc180-25.adsl.seed.net.tw)</TD></TR>
</TABLE>


WorkDir: c:\appserv\www\mrtg

最初由 噩夢 發表

Options[_]: growright, bits

上面加兩行, 然後在 Options 後面加上每秒流入量 除 每秒流出量 乘 100

YTics[_]: 8
YTicsFactor[_]: 1
Options[_]: growright, bits, dorelpercent

如果沒排 schedule 五分鐘執行一次就加兩行變為,

YTics[_]: 8
YTicsFactor[_]: 1
Options[_]: growright, bits, dorelpercent
RunAsDaemon: Yes
Interval: 5

然後視窗不要關掉.

有排五分鐘執行一次就不需要.

加了 dorelpercent 就是右邊那個 % 顏色的線.

然後看看是不是因為速度太快破錶了.
或是沒有五分鐘執行一次.

# to get bits instead of bytes and graphs growing to the right
YTics[_]: 8
YTicsFactor[_]: 1
Options[_]: growright, bits, dorelpercent
RunAsDaemon: Yes
Interval: 5
language: big5
--------------------------------------------------
已經依照您的方法將cfg改為如上所示..
可是....還是一片慘綠...嗚嗚嗚嗚嗚...
請看http://dglare.ath.cx/mrtg/website.html

最初由 噩夢 發表
# to get bits instead of bytes and graphs growing to the right
YTics[_]: 8
YTicsFactor[_]: 1
Options[_]: growright, bits, dorelpercent
RunAsDaemon: Yes
Interval: 5
language: big5
------------...
把你 WorkDir: 裡面的所有 .log 剪到其他目錄放, 如果 LOG 不重要就刪除.

重新開始

以下是我抓你的設備所產生的圖.

另一個介面

你用的是 mrtg-2.9.26b-windows-version-may-be-broken 版吧!

我用這版試我的 642R 也有這個問題!

請問bx2aa兄,你用的版本是幾版的??
還有你抓我這邊設備的cfg檔案,是否可以貼上來?
我發現我這邊看到的左邊數字跟你的不一樣耶~
還有您之前貼的
-----------------------------------------
Perl /lib 的 FindBin.pm
if ($IsWin32)
{
$Bin =~ s/\//\\/g;
}
有沒有加上.
-----------------------------------------
這一段...我在我的FindBin.pm裡面沒看到,是不是我要加入這一段??
我裝的perl版本是ActivePerl 5.6.1 Build 633,是不是也要加入
上面那一段程式??如果要加入的話,該在哪邊?

我測試用的 MRTG 是 2.9.17

WorkDir: c:/211
Language: big5
YTics[_]: 8
YTicsFactor[_]: 1
Factor[_]: 1
kilo[_]: 1024
WithPeak[_]: ymw
Weekformat[_]: V
options[_]: growright, bits, transparent, noborder, dorelpercent, noarrow
YLegend[_]: BX2AA
# Timezone[_]: GMT+8
WriteExpires: yes
Background[_]: #00FFFF
RunAsDaemon: Yes
Interval: 5

######################################################################
# System: WEBSITE
# Description: Hardware: x86 Family 6 Model 11 Stepping 1 AT/AT COMPATIBLE - Software: Windows 2000 Version 5.0 (Build 2195 Uniprocessor Free)
# Contact:
# Location:
######################################################################


### Interface 1 >> Descr: 'MS TCP Loopback interface ' | Name: '' | Ip: '127.0.0.1' | Eth: '' ###
### The following interface is commented out because:
### * it is a Software Loopback interface
#
# Target[211.74.180.25_1]: 1:[email protected]:
# SetEnv[211.74.180.25_1]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="MS TCP Loopback interface "
# MaxBytes[211.74.180.25_1]: 1250000
# Title[211.74.180.25_1]: Traffic Analysis for 1 -- WEBSITE
# PageTop[211.74.180.25_1]: <H1>Traffic Analysis for 1 -- WEBSITE</H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>WEBSITE in </TD></TR>
# <TR><TD>Maintainer:</TD> <TD></TD></TR>
# <TR><TD>Description:</TD><TD>MS TCP Loopback interface </TD></TR>
# <TR><TD>ifType:</TD> <TD>softwareLoopback (24)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s</TD></TR>
# <TR><TD>Ip:</TD> <TD>127.0.0.1 (localhost.seed.net.tw)</TD></TR>
# </TABLE>


### Interface 16777219 >> Descr: 'Realtek 8139-series PCI NIC ' | Name: '' | Ip: '192.168.1.3' | Eth: '00-30-1b-0b-1e-31' ###

Target[211.74.180.25_16777219]: 16777219:[email protected]:
SetEnv[211.74.180.25_16777219]: MRTG_INT_IP="192.168.1.3" MRTG_INT_DESCR="Realtek 8139-series PCI NIC "
MaxBytes[211.74.180.25_16777219]: 12500000
Title[211.74.180.25_16777219]: Traffic Analysis for 16777219 -- WEBSITE
PageTop[211.74.180.25_16777219]: <H1>Traffic Analysis for 16777219 -- WEBSITE</H1>
<TABLE>
<TR><TD>System:</TD> <TD>WEBSITE in </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>Realtek 8139-series PCI NIC </TD></TR>
<TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD> <TD></TD></TR>
<TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>192.168.1.3 ()</TD></TR>
</TABLE>


### Interface 33554436 >> Descr: 'WAN (PPP/SLIP) Interface' | Name: '' | Ip: '211.74.180.25' | Eth: '00-53-45-00-00-00' ###

Target[211.74.180.25_33554436]: 33554436:[email protected]:
SetEnv[211.74.180.25_33554436]: MRTG_INT_IP="211.74.180.25" MRTG_INT_DESCR="WAN (PPP/SLIP) Interface"
MaxBytes[211.74.180.25_33554436]: 12500000
Title[211.74.180.25_33554436]: Traffic Analysis for 33554436 -- WEBSITE
PageTop[211.74.180.25_33554436]: <H1>Traffic Analysis for 33554436 -- WEBSITE</H1>
<TABLE>
<TR><TD>System:</TD> <TD>WEBSITE in </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>WAN (PPP/SLIP) Interface </TD></TR>
<TR><TD>ifType:</TD> <TD>ppp (23)</TD></TR>
<TR><TD>ifName:</TD> <TD></TD></TR>
<TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>211.74.180.25 (swtc180-25.adsl.seed.net.tw)</TD></TR>
</TABLE>

http://www.cruzio.com/~jeffl/mrtg/docs/w95mrtg.htm
我以前用 623 沒加那幾行, 是沒產生圖出來.
後來裝新版都會去改.
那幾行是在檔案最下面那裡插進去的看上面那個網頁 Fix a Perl Bug.

請問bx2aa兄..你的圖表左邊怎麼是
2720.0
2380.0
2040.0
我的左邊怎麼是
8.0
7.0
6.0
還有上面提到的perl改法,好像是用在98,me上..
我的是Win2K..好像沒作用~~
而且我把你貼上來的設定檔直接拿給我的mrtg 2.9.26使用..
結果還是不行,嗚嗚嗚嗚.. :~
會不會是跟我用zonealarm pro防火牆的關係阿.. :~~