想請問各位....
我的系統是win2000
在我執行command.com的時候.....
它出現了好像有關登錄編輯器錯誤的訊息
讓我很苦惱.......請教各位..這該怎麼解決
是從修改登錄檔的方式進行下手嗎?
這該怎麼改呢?.....
能幫幫我嗎?.各位.......拜託你們了
感激不盡....!!....謝謝:confused: :confused:

　　你可以先去看看 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\VirtualDeviceDrivers 下面的 key 是否有問題。

真的很感謝你的回應喔......
不過...想請問一下...??
你説的"是否有問題"...
是怎樣的情況才是有問題的情形呢?
拜託你了.....謝謝...!!
對了....常常會看到有你在替人回應文章....
真的很高興這些論壇有你們這些人...謝謝.....

http://www.pczone.com.tw/vbb3/showthread.php?t=81787

也謝謝dkjfso大大的回應
不過我的是執行某些程式會出現這樣的東西
開機時..很正常..並不會有
如果是因為防毒軟體倒致出錯...那這樣的話.是不是真的一定要先移除
有其他的解決方法嗎?
拜託你們了...謝謝......感激不盡.....

　　我提出我的疑惑（對比我自己這台電腦上的資料），在那個 "資料" 中好像應該是檔案的路徑而已，可是你所顯示的前面還加了一個 "RNBOVDD.DLL "，不曉得是不是這個問題？也許是我多慮了！

琥珀用的Win2000，VDD的資料是空白的。

NO SYMANTEC PRODUCTS !!

最初由 琥珀 發表
琥珀用的Win2000，資料是空白的。

　　兄台沒有用 Symantec 的產品吧！

由於瀏灠要加入會員，我把這篇貼出來:
Subject: Re: RNBOVDD.DLL ERROR - Can anybody help?


ADVERTISEMENT


THANKS! I had previously received a suggestion that it was dongle related (I
have two) but couldn't quite figure out how to eliminate the problem. Re
installing the software didn't help. After checking the Multimedia control
panel as you suggested I
discovered the driver reference but it complained that the driver didn't exist.
So, I deleted it on the spot. I still wasn't out of the woods yet. My recently
aquired Windows NT resource kit book told me that virtual device drivers have
registry entries
that are automatically updated when you *ADD* drivers. My suspicion is that
after loading new software that used updated dongle drivers that the old VDD
registry entry wasn't cleared properly. I had to set the value of
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\VirtualDeviceDrivers\VDD:REG\
_MULTI_SZ to "". It previously was "RNBOVDD.DLL"!

Oddly enough I had tried to search the registry (using regfind) for that value
but received a negative result. Hence, I had been assuming that the problem was
somewhere else.

Thanks again for the tip about the multimedia control panel.

Andrew Innes wrote:

> On Thu, 23 Jul 1998 15:10:50 -0600, Tim Davis <timdavis@t...> said:
> >I am getting the following error when I attempt to print.
> >
> >...\cmdproxy.exe
> >RNBOVDD.DLL: An installable virtual device driver failed DLL initialization.
> >
> >I can then <cancel> or <terminate>. If I cancel everything seems to work but
I still keep getting the error message dialog box.
> >
> >Anybody know what this is all about?
>
> That dll sounds like it is part of the Sentinel dongle driver from
> Rainbow. Check the Multimedia control panel, Devices page and look
> under "Other Multimedia devices" at the bottom.
>
> Maybe reinstalling the drivers will work, or getting newer ones?
>
> AndrewI

它是說把VDD的值清空，但為免影響symantec software的運作，
你可以把RNBOVDD.DLL清掉就好....

只是你不是出現RNBOVDD.DLL ERROR所以我也不太確定...。

感謝各位們的回應
只是我要修改這個值時
卻出現這樣的東西.....
是否真的將它們全殺掉嗎?.......
謝謝回應!!