view
2004-02-21, 03:48 PM
之前小弟都是用Windows Me,最近才試著去裝2000
裝了SP4及版主提供的PRE SP5
用了一星期左右,本來都很穩定以為都沒事,但過沒多久就常常自動重啟
重啟之後會出現下面的文字
*** Stop:0x0000000A(0x0000001C,0x00000002,0x00000000,0x80400708)
IRQL_NOT_LESS_OR_EQUAL
*** Address 80400708 base at 80400000,DateStamp 3ee6c002 - ntoskrnl.exe
If this is the first you've seen this stop error screen,restart your computer.
if this screen appears again,follow these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for
any Windows 2000 Updates you might need.
If problems continue,disable or remove any newly installed hardware or software .
Disable BIOS memory Options such as caching or shadowing .
Check your hard drive to make sure it is properly configured and terminated.
If you need to use safe mode to remove or disable components restart your
computer.press F8 to select Advanced Startup Options,and then select safe mode.
Refer to your Getting Started manual for more information on troubleshooting
Stop error.
雖然可以按F8進入進階選項選開機設定而再次進入Windows 2000(但有時又要試過個四.五次)
而且重啟發生時,有在我開啟AVI檔,或在灌DRIVER,或者關掉BT軟體...
請問各位前輩們該如何解決這個問題呀
多謝了
裝了SP4及版主提供的PRE SP5
用了一星期左右,本來都很穩定以為都沒事,但過沒多久就常常自動重啟
重啟之後會出現下面的文字
*** Stop:0x0000000A(0x0000001C,0x00000002,0x00000000,0x80400708)
IRQL_NOT_LESS_OR_EQUAL
*** Address 80400708 base at 80400000,DateStamp 3ee6c002 - ntoskrnl.exe
If this is the first you've seen this stop error screen,restart your computer.
if this screen appears again,follow these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer for
any Windows 2000 Updates you might need.
If problems continue,disable or remove any newly installed hardware or software .
Disable BIOS memory Options such as caching or shadowing .
Check your hard drive to make sure it is properly configured and terminated.
If you need to use safe mode to remove or disable components restart your
computer.press F8 to select Advanced Startup Options,and then select safe mode.
Refer to your Getting Started manual for more information on troubleshooting
Stop error.
雖然可以按F8進入進階選項選開機設定而再次進入Windows 2000(但有時又要試過個四.五次)
而且重啟發生時,有在我開啟AVI檔,或在灌DRIVER,或者關掉BT軟體...
請問各位前輩們該如何解決這個問題呀
多謝了