TIM
2001-11-06, 11:05 PM
這個風扇是利用特殊管道取得的..我不清楚市面上看不看的到..首先..這個風扇採0.5CM銅底冷鑄..34片鰭片..中間有一道剖溝..扣具本身是以FC-PGA2封裝設計的..如果使用在CPGA封裝上會比較難扣..因為多了1mm..34片鰭片與銅底之間是焊接上去的..我之前有看過鰭片與銅底是一體成型的..因為削鉋力的關西..所以鰭片與銅底不會呈現90度角..而是帶有弧度的彎曲..但在這款風扇上並無發現..在上面搭載的風扇也是很有文章..採用Y.S.TECH的FD1260207b-2a..60mm*60mm*20mm..採雙滾珠承軸..44克重..4200轉..平均壽命7.5萬小時..最大靜推力有4.4MM..最大風量有22.9CFM..吃12伏直流電1.92瓦的消耗功率..實際用起來..噪音也不會很大..僅僅35分貝..一個3Pin電源插頭..可偵測轉速..由於我用來測試的CPU等級較低..現在又是冬天..對Celeron300A而言..跑SuperPI(32M20分鐘後)溫度比起市溫上升約4.9度..不過在測試中發現一個結構瑕疵..就是鰭片在靠近兩旁..也就是第一片與第34片..可以清楚看見..會因為外殼作用力..無法與銅底完整的接觸..另外在盒裝散熱器裡附有一小包AK-100散熱膏..不過我是用另外一支德國進口的導熱油取代之..
http://home.pchome.com.tw/education/tim7535/teac/00000001.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000002.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000003.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000004.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000005.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000006.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000007.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000008.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000009.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000010.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000011.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000001.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000002.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000003.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000004.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000005.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000006.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000007.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000008.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000009.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000010.JPG
http://home.pchome.com.tw/education/tim7535/teac/00000011.JPG