【求助】Windows 98 開機出現 Spool32錯誤

顯示結果從第 1 筆 到 3 筆,共計 3 筆
  1. #1
    會員
    註冊日期
    2002-01-04
    討論區文章
    33

    【求助】Windows 98 開機出現 Spool32錯誤

    各位好,來向各位求救...
    有誰知道該如何解決呢?....

    OS:Windows 98

    狀況:
    稍早安裝 hp LaserJet 2200 for 98 的Driver 連接埠-LPT1. 一切正常.
    但重開機後,隨即出現 Spool32.exe cause a fault on KERNEL32.DLL...

    之後:
    開始-設定-印表機 -> 照樣出現上述訊息。

    不死心:
    開始-設定-印表機->沒品應(大約三十秒)->終於出現印表機資料夾。
    ->試著重新安裝印表機(任何一種)->『沒有可用的連接埠』。

    已試過:
    1.重新 COPY 一份新的 Spool32.exe 到C:\Windows\System底下.->沒用.
    2.重新「覆蓋性」安裝Windows98.(未format,僅開始-執行-setup).->沒用.
    3.安全模式開機->錯誤訊息一模一樣.
    4.msconfig->選擇性開機->拿掉所有選項->還是沒用.
    5.scanreg->試著救回安裝LaserJet2200前的Registry檔->沒有備份到之前的->還是沒用...

    求救~~~~~~
    救命啊……[/B] [/B]



  2. #2
    資深潛水員 ericlien 的大頭照
    註冊日期
    2001-12-08
    所在地區
    X世代
    討論區文章
    4,407
    此會員在你忽略列表上. 查看此文章點選【這裡








     

  3. #3
    會員
    註冊日期
    2002-01-04
    討論區文章
    33
    感謝您的指教。
    但是,文中所提的--
    Windows 98
    Click Start, point to Programs, point to Accessories, point to System Tools, and then click System Information.
    On the Tools menu, click System Configuration Utility.
    Click Selective Startup on the General tab, and then click to clear the following check boxes:
    Process Config.sys File
    Process Autoexec.bat File
    Process Winstart.bat File
    Process System.ini File
    Process Win.ini File
    Load Startup Group Items

    Note You must reinstall the printer driver when you disable the Win.ini file because the printer and port information is stored in this file.
    Click OK, and then quit the System Information tool.
    Restart your computer.
    For information about how to clean-boot a Windows 98-based computer by using the System Configuration tool, view the "Narrowing the Focus" section in the following Microsoft Knowledge Base article:

    我都已經做過了 ……還是沒用....
    Anyway,,,還是謝謝。

類似的主題

  1. 【軟體】spool32造成netbios.dll錯誤
    作者:ating86 所在討論版:-- Windows 討 論 版
    回覆: 0
    最後發表: 2005-06-02, 03:29 PM
  2. 【求助】98出現protectuon error錯誤訊息
    作者:ginzu 所在討論版:-- HELP ME 電 腦 軟 硬 體 急 救 版
    回覆: 2
    最後發表: 2004-11-14, 05:38 PM
  3. 【求助】開機出現錯誤,進不了系統
    作者:pixy 所在討論版:-- HELP ME 電 腦 軟 硬 體 急 救 版
    回覆: 4
    最後發表: 2003-05-11, 08:39 AM
  4. 【求助】WIN2000開機出現難解錯誤???
    作者:adampc 所在討論版:-- HELP ME 電 腦 軟 硬 體 急 救 版
    回覆: 4
    最後發表: 2002-09-27, 03:34 PM
  5. windows 98 一開機出現的訊息?
    作者:chengmou 所在討論版:-- Windows 討 論 版
    回覆: 1
    最後發表: 2002-01-17, 01:50 PM

 

此網頁沒有從搜尋引擎而來的訪客

發表文章規則

  • 不可以發表新主題
  • 不可以回覆文章
  • 不可以上傳附加檔案
  • 不可以編輯自己的文章
  •