STOP: 0x0000007B - 第 7 頁

第 7 頁,共 12 頁 首頁首頁 ... 5 6 7 8 9 ... 末頁末頁
顯示結果從第 61 筆 到 70 筆,共計 113 筆
  1. #61
    會員
    註冊日期
    2001-07-25
    討論區文章
    32

    重回Windows 98懷抱...

    我就是用下列方式完成反安裝Win2000我的Win98和Win2000是共存於同一分割區,且我的磁碟機是FAT32)

    1.使用Win98開機片開機. (出現3個選項,選擇啟動電腦和CD-ROM)
    2.在A:>下輸入: SYS C: (可使開機磁區回復至原使單一作業系統的狀態)
    3.移除WIN98開機片,重新啟動電腦.
    4.進入Win98後.請在"檔案總管"中刪除Win2000系統資料夾.(應該是 winnt)
    5.請在"檔案總管"手動刪除C槽下的一些檔案這些檔案部分為隱藏檔,請解開屬性後,再執行刪除)

    Boot.ini
    Bootsect.dos
    Ntldr
    Ntdetect.com
    Pagefile.sys (如果有這個檔案的話)

  2. #62
    會員
    註冊日期
    2002-01-02
    討論區文章
    8

    Win2000 出現stop: 0x0000007B

    Win2000 出現stop: 0x0000007B INACCESSBLE_BOOT_DEVICE
    藍色畫面
    請各位高手救救我阿.....謝謝

  3. #63
    會員
    註冊日期
    2001-12-13
    討論區文章
    70

    請問win2000安裝~~

    請問一下ㄛ~
    我之前有安裝過win2000
    但是因為有點不習慣就又換回win98
    但是我現在又想要安裝win2000
    卻不能了為什麼
    可以幫我一下嗎~???thx......

  4. #64
    會員
    註冊日期
    2001-04-30
    討論區文章
    383
    怎樣不能ㄌㄟ?
    有什麼錯誤訊息嗎?
    寫清楚一點,大家才好幫你阿...

  5. #65
    會員
    註冊日期
    2001-12-13
    討論區文章
    70
    最初由 Net surfer 發表
    怎樣不能ㄌㄟ?
    有什麼錯誤訊息嗎?
    寫清楚一點,大家才好幫你阿...

    有點長說~
    麻煩各位看倌囉~


    ***stop :0x00000007B.(0x81826530,0xc0000185,0x00000000,0x00000000)
    InACCESS IBLE_BOOT_DEVICE
    If this is the first time you're seen thes shop error screen ,restart your
    computer .If this screen oppears again,follow thesr step:
    check for virases on your computer,remore any newly installed hard drives
    or hard drive controllers.Check your hard drive to make sure it is pnperly
    configured and terminated .
    Run chkdsk if to check for har drive corruption , and then restart your
    computer .Refer to your Getting Started Manual for more information on
    troubleshooting stop error.

    以上就是我所出現的問題,請各位幫忙解決一下吧!...
    (我是直接用win2000內的i386資料夾的winnt執行後所出現的錯誤)
    還有一個疑問ㄛ~?請問,那四片win2000開機片到底要如何使用ㄚ~?
    可否教一下說,我找過disk1裡面的檔案,好像都沒有執行檔說.....
    幫忙一下,thx all~~~~~~~~^_^.....

  6. #66
    會員
    註冊日期
    2001-04-30
    討論區文章
    383
    它上面的指示訊息你有照著做過了嗎?

    0x0000007B INACCESSIBLE_BOOT_DEVICE Unable to access boot device. Often, this indicates a disk controller configuration problem, or error in accessing the hard disk. Other possible causes include the following: during initialization of the I/O system, the driver for the boot device failed to initialize the boot device (device not available, SCSI error), or the file system could not recognize the data on the boot device. Also may indicate that a virus has infected the boot sector.

    這幾篇你參考看看吧...
    http://msdn.microsoft.com/library/de...kmsgs/6097.asp
    http://www.osr.com/ddk/bccodes_2mav.htm
    http://www.ntcompatible.com/faq225.shtml

    你的硬體配備呢?

  7. #67
    會員
    註冊日期
    2001-12-13
    討論區文章
    70
    我用的是ASUS A7V
    k7 750沒超
    ASUS V7100
    科昇FOP38 fan
    Buffalo EarthNet card
    SCSI card

  8. #68
    潛字第1號 rEdS 的大頭照
    註冊日期
    2000-10-20
    所在地區
    XDSL
    討論區文章
    4,332
    由於你是用scsi卡,我猜你的hd應該也是scsi的
    麻煩你在安裝windows2000一開始進入文字模式時按F6
    等到安裝程式到一階段就會出現要你放入scsi driver的畫面
    你再把driver放進去應該就行了

  9. #69
    會員
    註冊日期
    2001-12-13
    討論區文章
    70
    最初由 rEdS 發表
    由於你是用scsi卡,我猜你的hd應該也是scsi的
    麻煩你在安裝windows2000一開始進入文字模式時按F6
    等到安裝程式到一階段就會出現要你放入scsi driver的畫面
    你再把driver放進去應該就行了

    不好意思說我的H.D是IDE的,我的CD-R才是SCSI的...
    sorry~前面沒有註明清楚說......歹識....

  10. #70
    ..
    註冊日期
    2001-02-24
    討論區文章
    802

    Windows 2000用 SPFDISK 調整分割後,無法開機,完全死當的問題?

    我的OS是Windows 2000 Pro,
    第一個主分割區為NTFS檔案格式。
    最近用了 SPFdisk (版本:2000-02h )
    來執行分割區大小的調整,將原來的C切掉一部份空間,
    再另建一個新的主分割區,準備新安裝另外一個OS。
    調整分割區大小前我有做過磁碟重組的動作了,
    可是呢,用SPFDSIK調整完分割區大小後,開機到一半就完全死當了。
    我的Windows 2000不管再重開機幾次都無法正常運作。
    看樣子是掛了!

    出現的錯誤訊息是:(藍底白字那種完全死當的畫面)
    ===================================
    *** STOP: 0x0000007B (0x80b22c10,0xc000014F,0x00000000,0x00000000)

    INACCESSIBLE_BOOT_DEVICE


    If this is the first time your've seen this stop error screen,
    restart your computer. If this screen appears again, follow these steps:

    check for virus on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly
    configured and terminated .
    Run CHKDSK /F to check for hard drive correption, and then restart your computer.

    Refer to your Getting Starded manual for more information on troubleshooting stop errors.
    ===================================



    我有嘗試要執行 CHKDSK /F ,不過我不知道要怎麼執行,連「安全模式」都進不去,
    任何一種安全模式都進不去,不知道要如何執行CHKDSK /F ????
    然後我用DOS開機片開機,打算執行CHKDSK /F ,後來才想到我的檔案格式是NTFS
    在DOS下不支援。所以也沒辦法執行CHKDSK /F 。

    該怎麼辦呢???



    這樣的當機畫面是Windows 2000的一種保護模式嗎?
    要如何解除?

    或者,這是Windows 2000的缺陷?
    原開機磁碟一調整分割區大小後,就無法開機了?
    我在Windwos Me 裡面執行同樣的動作都OK啊。

    請大家一起來幫幫忙唷∼∼





    


第 7 頁,共 12 頁 首頁首頁 ... 5 6 7 8 9 ... 末頁末頁

類似的主題

  1. STOP: 0x0000008E
    作者:ps2vsdc 所在討論版:-- Windows 討 論 版
    回覆: 38
    最後發表: 2004-06-11, 01:22 AM
  2. STOP: 0x0000004E
    作者:WAHAHA_709 所在討論版:-- Windows 討 論 版
    回覆: 5
    最後發表: 2003-06-14, 11:55 PM
  3. STOP: 0xC0000221
    作者:marque 所在討論版:-- Windows 討 論 版
    回覆: 20
    最後發表: 2003-02-19, 01:01 PM
  4. STOP: 0x000000C5
    作者:saint_huang 所在討論版:-- Windows 討 論 版
    回覆: 6
    最後發表: 2003-02-03, 06:18 AM
  5. STOP: 0x00000044
    作者:威席史坦畢特 所在討論版:-- Windows 討 論 版
    回覆: 13
    最後發表: 2002-03-29, 01:23 PM

 

technical information Stop 0*0000007B

安裝xp 藍底白字 0 0000007b

0000007b藍底

換主機板 重灌 0000007b

發表文章規則

  • 不可以發表新主題
  • 不可以回覆文章
  • 不可以上傳附加檔案
  • 不可以編輯自己的文章
  •