【求助】硬碟無法重灌

硬碟format後無法灌win me 作業程式
出現stand mode：fault in MS DOS Extender
請大家告訴我這是哪裡出問題阿.....

這大概跟記憶體有關
以下是從 WinME 的 setup.txt 剪貼下來的，做個參考：

Standard Mode Messages
----------------------
If you get any of the following error messages, remove any
memory managers (such as EMM386.exe, QEMM, or 386Max) from
your Config.sys file, and then run Setup again.

Standard Mode: Invalid DPMI return.
[b]Standard Mode: Fault in MS-DOS Extender.[/b]
Standard Mode: Bad Fault in MS-DOS Extender.
Standard Mode: Unknown stack in fault dispatcher.
Standard Mode: Stack Overflow.

NOTE: If you still have problems, add EMM386.exe back into
your Config.sys file and exclude all ranges. For example:

device=c:\windows\emm386.exe x=A000-FFFF

If you encounter these messages or if your computer stops
responding during Setup, turn on double-buffering in
SmartDrive. Several SCSI hard drives and some ESDI drives
require double-buffering.

To turn on double buffering, add the following line to
the beginning of your Config.sys file:

device=c:\windows\smartdrv.exe /double_buffer+

where "c:\windows" is the path to your Windows directory.