-
[color=red]Change the Command Prompt[/color] (Windows NT/2000/XP)
[color=green]This setting allows you to change the format of the command prompt to show additional information instead of just the current drive and path ("C:\>").[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment]
Value Name: PROMPT
Data Type: REG_EXPAND_SZ (Expanded String Value)
Value Data: Prompt Text (e.g. $P$G)
Create or modify a REG_EXPAND_SZ string called "PROMPT" and set it to the required prompt format including any special codes or variables below.
[list][b]Special Codes[/b][*][b]$A[/b] - & (Ampersand) [*][b]$B[/b] - | (pipe) [*][b]$C[/b] - ( (Left parenthesis) [*][b]$D[/b] - Current date [*][b]$E[/b] - Escape code (ASCII code 27) [*][b]$F[/b] - ) (Right parenthesis) [*][b]$G[/b] - > (greater-than sign) [*][b]$H[/b] - Backspace (erases previous character) [*][b]$L[/b] - < (less-than sign) [*][b]$N[/b] - Current drive [*][b]$P[/b] - Current drive and path [*][b]$Q[/b] - = (equal sign) [*][b]$S[/b] - (space) [*][b]$T[/b] - Current time [*][b]$V[/b] - Windows XP version number [*][b]$_[/b] - Carriage return and linefeed [*][b]$$[/b] - $ (dollar sign)
[b]Variables[/b][*][b]%USERNAME%[/b] - Current Username [*][b]%COMPUTERNAME%[/b] - Local computer name [*][b]%USERDOMAIN%[/b] - Local domain name
The default prompt is "$P$G" (e.g. "C:\>"), some alternatives include:[*][b][%computername%]$S$P$G[/b] to show the computer, drive and path [*][b][%username%]$S$P$G[/b] to show the current user, drive and path[/list][/color]
瀏覽 -> [url]http://www.winguides.com/registry/display.php/1252/[/url]
-
[color=red]Enable the Scheduled Tasks Icon[/color] (Windows Me)
[color=green]This tweak allows you to configure your computer so that the Scheduled Tasks icon is displayed on the taskbar in Windows Millennium Edition (Me).[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\Software\Microsoft\Plus!\System Agent]
Value Name: EnableTrayIcon
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = default, 1 = enable icon)[/color]
瀏覽 -> [url]http://www.winguides.com/registry/display.php/1254/[/url]
-
[color=red]Display Network Error Statistics[/color]* (Windows 2000/XP)
[color=green]This tweak allows you display error statistics on the Network Connection Status page for LAN and WAN connections. This information may be useful in diagnosing the network reliability.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network\Connections\StatMon]
Value Name: ShowLanErrors
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = default, 1 = enable error count)[/color]
瀏覽 -> [url]http://www.winguides.com/registry/display.php/1255/[/url]
*這和之前的[url=http://www.pczone.com.tw/showthread.php?s=&postid=479003#post479003]顯示網路連線錯誤計數[/url]設定是一樣的。
-
[color=red]Disable Passport Balloon Reminder[/color] (Windows XP)
[color=green]When you install Windows XP a balloon reminder is shown to prompt you to enter a Microsoft .NET Passport. This reminder can be disabled if you are not using Passport or MSN Messenger.[/color]
[color=blue]User Key: [HKEY_CURRENT_USER\Software\Microsoft\MessengerService]
Value Name: PassportBalloon
Data Type: REG_BINARY (Binary Value)
Value Data: "0a 00 00 00" = disabled[/color]
瀏覽 -> [url]http://www.winguides.com/registry/display.php/1256/[/url]
-
[color=red]Specify Anonymous Remote Registry Access[/color] (Windows NT/2000/XP)
[color=green]This tweak allows you to specify which keys under the HKEY_LOCAL_MACHINE hive that anonymous users are allowed to access remotely. This is useful because some services require remote access to the registry to function correctly.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurePipeServers\winreg\AllowedPaths]
Value Name: Machine
Data Type: REG_MULTI_SZ (Multi-String Value)[/color]
[color=green][i][b]Note:[/b] These keys will bypass general access restrictions but will still be restricted if an explicit access restriction exists for that location.[/i][/color]
瀏覽 -> [url]http://www.winguides.com/registry/display.php/1258/[/url]
-
[color=red]Control Microsoft VM Garbage Collection[/color]
[color=green]This tweak allows you to specify the quantity of new memory that Java can consume before garbage collection is initiated. Garbage collection (GC) consumes a lot of system resources and can severely affect performance.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Java VM]
Value Name: Generation0Size
Data Type: REG_DWORD (DWORD Value)
Value Data: Size in bytes (max = 4194304)[/color]
[color=green][i][b]Note:[/b] Only functions with Microsoft VM build 3229 or greater.[/i][/color]
瀏覽 -> [url]http://www.winguides.com/registry/display.php/1259/[/url]
-
[color=red]Change the File Attribute for System Folders[/color] (Windows 95/98/Me/NT/2000)
[color=green]Windows Explorer normally uses the Read-Only attribute to determine whether a folder is customized. This may cause file saving problems with some programs and not allow you to remove the attribute. This tweak allows you to force Windows to use the alternate System attribute.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer]
Value Name: UseSystemForSystemFolders
Data Type: REG_DWORD (DWORD Value)
Value Data: (1 = use system attribute)[/color]
參考 -> [url]http://www.winguides.com/registry/display.php/1260/[/url]
-
[color=red]Allow Uninstall of Windows Components[/color] (Windows XP)
[color=green]Windows includes a number of system components that are normally not available on the Add/Remove Windows Components list. This tweak allows you to display these items and therefore have the option to uninstall.[/color]
[color=blue]Open the SYSOC.INF file in the Windows\INF sub-directory (e.g. C:\Windows\INF).
Under the [Components] heading are the system components installed on the computer. The items that have the word "HIDE" or "hide" in them are not displayed on the Add/Remove Programs list. e.g. the WordPad program is usally not shown because it contains "HIDE"
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,[b]HIDE[/b],7
To change an item so it is shown remove the "hide" text, leaving the surrounding commas. For example you would change the WordPad entry from:
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
To:
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,,7
The main hidden Windows components in Windows XP are:
[b]Accessibility Wizard[/b]
AccessOpt=ocgen.dll,OcEntry,optional.inf,HIDE,7
[b]Automatic Windows Update[/b]
AutoUpdate=ocgen.dll,OcEntry,au.inf,hide,7
[b]COM+[/b]
com=comsetup.dll,OcEntry,comnt5.inf,hide,7
[b]Communications components[/b] (including Chat, Hyperterminal, and Phone Dialer)
CommApps=ocgen.dll,OcEntry,communic.inf,HIDE,7
[b]Distributed Transaction Coordinator[/b]
dtc=msdtcstp.dll,OcEntry,dtcnt5.inf,hide,7
[b]Windows Messenger[/b]
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
[b]WordPad[/b]
MSWordPad=ocgen.dll,OcEntry,wordpad.inf,HIDE,7
[b]Multimedia components[/b] (including Media Player, Volume Control, and Sound Recorder)
MultiM=ocgen.dll,OcEntry,multimed.inf,HIDE,7
[b]Pinball game[/b]
Pinball=ocgen.dll,OcEntry,pinball.inf,HIDE,7
[b]Tablet PC[/b]
TabletPC=tabletoc.dll,TabletSetupProc,Tabletpc.inf,HIDE,7
[b]Terminal Server[/b]
TerminalServer=TsOc.dll, HydraOc, TsOc.inf,hide,2
[b]Windows Management Instrumentation[/b]
WBEM=ocgen.dll,OcEntry,wbemoc.inf,hide,7
Save the file and reopen the Add/Remove Windows Components listing for the change to take effect.[/color]
瀏覽 -> [url]http://www.winguides.com/registry/display.php/1261/[/url]
-
[color=red]Change the Default Keep-Alive Time-Out in Internet Explorer[/color]
[color=green]When Internet Explorer establishes a persistent HTTP connection with a Web server it reuses the same TCP/IP socket until the connection is idle for one minute. This tweak allows you to change the time-out period which is useful if you experience connection problems.[/color]
[color=blue]User Key: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]
Value Name: KeepAliveTimeout
Data Type: REG_DWORD (DWORD Value)
Value Data: Time in milliseconds (default = 120,000)[/color]
[u][url=http://www.winguides.com/registry/display.php/1262/]了解更多關於Change the Default Keep-Alive Time-Out in Internet Explorer[/url][/u]。
-
[color=red]Change the Default Mail Client[/color]
[color=green]The setting allows you to change which program is opened and used to send an e-mail messages when you click on a "mailto:" link in a web page.[/color]
[color=blue]System Key: [HKEY_CLASSES_ROOT\mailto\shell\open\command]
Value Name: (Default)
Data Type: REG_SZ (String Value)
Value Data: Mail program command-line[/color]
[u][url=http://www.winguides.com/registry/display.php/1263/]了解更多關於Change the Default Mail Client[/url][/u]。
-
[color=red]Change the Critical Update Notification Delay[/color] (Windows 95/98/Me)
[color=green]When Windows detects that a new critical update is available it gives you the option to update now or to be reminded again in 1 day. This tweak allows you to change the default 1 day reminder period.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsUpdate\Critical Update]
Value Name: CurrentDelayInterval
Data Type: REG_DWORD (DWORD Value)
Value Data: Time in seconds (Default = 86,400)[/color]
[u][url=http://www.winguides.com/registry/display.php/1264/]了解更多關於Change the Critical Update Notification Delay[/url][/u]。
-
[color=red]Modifying the Autocheck Time-out Value[/color] (Windows NT/2000/XP)
[color=green]When Windows is not shutdown correctly it will perform an AutoCheck using CHKDSK on the next restart. This setting controls the time delay before running Autochk or whether it is run at all.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager]
Value Name: AutoChkTimeOut
Data Type: REG_DWORD (DWORD Value)
Value Data: Time in Seconds or 0 to disable (default = 10)[/color]
[u][url=http://www.winguides.com/registry/display.php/907/]了解更多關於Modifying the Autocheck Time-out Value[/url][/u]。
-
[color=red]Optimize the Windows Server Service[/color] (Windows NT/2000/XP)
[color=green]This setting can be used to manually optimize the Windows server functionality. By selecting the appropriate value you can optimize the service for memory usage, network throughput or a balance of both.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters]
Value Name: Size
Data Type: REG_DWORD (DWORD Value)
Value Data: "1" = minimize memory, "2" = balance or "3" = maximize network throughput[/color]
[u][url=http://www.winguides.com/registry/display.php/1265/]了解更多關於Optimize the Windows Server Service[/url][/u]。
-
[color=red]Disable Windows Messenger in Outlook[/color]
[color=green]This setting can be used to disable the integration of Windows (MSN) Messenger so that is does not start when using Microsoft Outlook.[/color]
[color=blue]User Key: [HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\10.0\Outlook\InstantMessaging]
Value Name: ForceDisableIM
Data Type: REG_DWORD (DWORD Value)
Value Data: 1 = enable restriction[/color]
[u][url=http://www.winguides.com/registry/display.php/1266/]了解更多關於Disable Windows Messenger in Outlook[/url][/u]。
-
[color=red]Remove Windows Messenger from Internet Explorer[/color]
[color=green]This tweak can be used to remove the integration of Windows Messenger into Internet Explorer. It will remove both the toolbar icon and Tools menu item.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Extensions\{FB5F1910-F110-11d2-BB9E-00C04F795683}]
Highlight the key and select Edit | Rename, add a minus symbol ("-") to the start of the key name so that it is now called "-{FB5F1910-F110-11d2-BB9E-00C04F795683}".[/color]
[u][url=http://www.winguides.com/registry/display.php/1049/]了解更多關於Remove Windows Messenger from Internet Explorer[/url][/u]。
-
[color=red]Remove Windows Messenger from Outlook Express[/color]
[color=green]This tweak is used to remove MSN Instant Messenger functionality and integration from Outlook Express.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Outlook Express]
Value Name: Hide Messenger
Data Type: REG_DWORD (DWORD Value)
Value Data: (2 = remove messenger)[/color]
[color=green][i][b]Note:[/b] This tweak should also remove AOL Instant Messenger 5 integration.[/i][/color]
[u][url=http://www.winguides.com/registry/display.php/989/]了解更多關於Remove Windows Messenger from Outlook Express[/url][/u]。
-
[color=red]Disable MSN Instant Messenger[/color]
[color=green]This restriction is used to disable the ability to run the Microsoft MSN Instant Messenger client.[/color]
[color=blue]User Key: [HKEY_CURRENT_USER\Software\Policies\Microsoft\Messenger\Client]
System Key: [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Messenger\Client]
Value Name: PreventAutoRun, PreventRun
Data Type: REG_DWORD (DWORD Value)
Value Data: (1 = enable restriction, 0 = default)[/color]
[color=green][i][b]Note:[/b] This tweak is applicable to MSN Messenger 4.x, this restriction has been removed from version 5 of the software.[/i][/color]
[u][url=http://www.winguides.com/registry/display.php/981/]了解更多關於Disable MSN Instant Messenger[/url][/u]。
-
[color=red]Using BOOT.INI Startup Switches[/color] (Windows NT/2000/XP)
[color=green]Windows NT, 2000 and XP use a configuration file called BOOT.INI to control how the operating system is booted and any startup options. By modifying the startup switches you can manage the boot process including booting Windows in Safe mode, creating a log file, or disabling the splash screen.[/color]
[color=blue]Open the root partition of your hard drive (normally C:\) and find the file called "BOOT.INI". You may need to enable hidden files under Folder > Options.
Right-click on the file, select Properties and uncheck "Read-only" then click OK. You may like to make a backup of the file at this point to allow you to restore if you experience problems.
Open the file in Notepad and under the [operating systems] section you will find a list of all the installed operating systems. For example:
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect
To enable or disable startup options simply change or add any of the switches listed below to the default command-line. For example you could add "/SOS" to the command-line above to display the splash screen and view the drivers being loaded.
[b]/3GB[/b] - New to Service Pack 3. This causes the split between user and system portions of the Windows NT map to become 3GB for user applications, 1GB for System. To take advantage of this the system must be part of the NT Enterprise suite and the application must be flagged as a 3GB aware application.
[b]/BASEVIDEO[/b] - The computer starts up using the standard VGA video driver. Use this if you have installed a graphics driver that is not working.
[b]/BAUDRATE[/b] - Specifies the baud rate to be used for debugging. If you do not set the baud rate, the default baud rate is 9600 if a modem is attached, and 19200 for a null-modem cable.
[b]/BOOTLOG[/b] - Makes 2000 write a log of the boot to the file %SystemRoot%\NTBTLOG.TXT Windows 2000/XP Only.
[b]/BURNMEMORY=x[/b] - Makes NT forget about the given amount of memory in MB. If /burnmemory=64 was given then 64MB of memory would be unavailable.
[b]/CRASHDEBUG[/b] - The debugger is loaded when you start Windows NT, but remains inactive unless a Kernel error occurs. This mode is useful if you are experiencing random, unpredictable Kernel errors.
[b]/DEBUG[/b] - The debugger is loaded when you start Windows NT, and can be activated at any time by a host debugger connected to the computer. This is the mode to use when you are debugging problems that are regularly reproducible.
[b]/DEBUGPORT=comx[/b] - Specifies the com port to use for debugging, where x is the communications port that you want to use.
[b]/FASTDETECT[/b] - Specifying FASTDETECT causes NTDETECT to skip parallel and serial device enumeration for a boot into Win2K, whereas omitting the switch has NTDETECT perform enumeration for a boot into NT 4.0. Win2K setup automatically recognizes dual-boot configurations and sets this switch for BOOT.INI lines that specify a Win2K boot. Windows 2000/XP Only.
[b]/HAL=<hal>[/b] - Allows you to override the HAL used, for example using a checked version.
[b]/INTAFFINITY[/b] - Sets the multiprocessor HAL (HALMPS.DLL) to set interrupt affinities such that only the highest numbered processor in an SMP will receive interrupts. Without the switch the HAL defaults to its normal behavior of letting all processors receive interrupts. Windows 2000/XP Only.
[b]/KERNEL=<kernel>[/b] - Same as above but for the kernel.
[b]/MAXMEM:n[/b] - Specifies the maximum amount of RAM that Windows NT can use. This switch is useful if you suspect a memory chip is bad.
[b]/NODEBUG[/b] - No debugging information is being used.
[b]/NOGUIBOOT[/b] - When this option is specified the VGA video driver responsible for presenting bit mapped graphics during Win2K's boot process is not initialized. The driver is used to display boot progress information, as well as to print the Blue Screen crash screen, so disabling it will disable Win2K's ability to do those things as well. Windows 2000/XP only.
[b]/NOSERIALMICE=[COMx | COMx,y,z...][/b] - Disables serial mouse detection of the specified COM port(s). Use this switch if you have a component other than a mouse attached to a serial port during the startup sequence. If you use /NOSERIALMICE without specifying a COM port, serial mouse detection is disabled on all COM ports.
[b]/NUMPROC=n[/b] - Only enables the first n processors on a multiple processor system.
[b]/ONECPU[/b] - Only use the first CPU in a multiple processor system.
[b]/PCILOCK[/b] - Stops Windows NT from dynamically assigning IO/IRQ resources to PCI devices and leaves the devices configured by the BIOS.
[b]/SAFEBOOT[/b] - This is an automatic switch which NTLDR should complete for you when you use the F8 menu to perform a safe boot. Following the colon in the option you must specify one of three additional switches: MINIMAL, NETWORK, or DSREPAIR. The MINIMAL and NETWORK flags correspond to safe boot with no network and safe boot with network support. The safe boot is a boot where Windows 2000/XP only loads drivers and services that are specified by name or group in the Minimal or Network Registry keys under HKLM\System\CurrentControlSet\Control\SafeBoot. The DSREPAIR (Directory Services Repair) switch causes NT to boot into a mode where it restores the Active Directory from a backup medium you present. An additional option that you can append is "(ALTERNATESHELL)". This tells NT to use the program specified by HKLM\System\CurrentControlSet\SafeBoot\AlternateShell as the graphical shell, rather than to use the default which is Explorer. Windows 2000/XP only.
[b]/SOS[/b] - Displays the driver names while they are being loaded. Use this switch if Windows NT won’t start up and you think a driver is missing. This option is configured by default on the [VGA] option on the boot menu.
[b]/WIN95[/b] - This switch is only pertinent on a triple-boot system that has DOS, Win9x and Windows NT installed. Specifying the /WIN95 switch directs NTLDR to boot the Win9x boot sector stored in BOOTSECT.W40. See Microsoft KB Article Q157992 for more information.
[b]/WIN95DOS[/b] - This switch is only pertinent on a triple-boot system that has DOS, Win9x and Windows NT installed. Specifying the /WIN95DOS switch directs NTLDR to boot the DOS boot sector stored in BOOTSECT.DOS. See Microsoft KB Article Q157992 for more information.
[b]/YEAR=[/b] - Specifying this value causes NT/Windows 2000 core time function to ignore the year that the computer's real-time clock reports and instead use the one indicated. Thus, the year used in the switch affects every piece of software on the system, including the NT kernel. Example: /YEAR=2005. Note: this option is only available on NT 4.0 Service Pack 4 and Windows 2000/XP.[/color]
[u][url=http://www.winguides.com/registry/display.php/1268/]了解更多關於Using BOOT.INI Startup Switches[/url][/u]。
-
[color=red]Configure Remote Access Client Account Lockout[/color] (Windows 2000/XP)
[color=green]You can use the remote access account lockout feature to specify how many times a remote access authentication has to fail against a valid user account before the user is denied access. Use this tweak to set the number of failed logins before the account is locked-out and the time before the lockout is reset.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RemoteAccess\Parameters\AccountLockout]
Value Name: MaxDenials, ResetTime (mins)
Data Type: REG_DWORD (DWORD Value)
Create a new DWORD value or modify the existing value called "MaxDenials" and set it to the number of failed logins to lockout the account (or 0 to disable lockout).
Create another DWORD value or modify the existing value called "ResetTime (mins)" and set it to the time in minutes that an account should remained locked-out. The default is 2,880 minutes (two days).[/color]
[u][url=http://www.winguides.com/registry/display.php/1270/]了解更多關於Configure Remote Access Client Account Lockout[/url][/u]。
-
[color=red]Disable the Internet Explorer HTML Source Editor Check[/color]
[color=green]Internet Explorer will normally attempt to detect the program originally used to create a HTML document and modify the "Edit" option to use the same program for future editing. This tweak can be used to enable or disable the checking.[/color]
[color=blue]User Key: [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main]
Value Name: CheckDocumentForProgID
Data Type: REG_SZ (String Value)
Value Data: "yes" or "no"[/color]
[color=green][i][b]Note:[/b] Disabling this feature will cause Internet Explorer to use the default editor for all editing.[/i][/color]
[u][url=http://www.winguides.com/registry/display.php/1272/]了解更多關於Disable the Internet Explorer HTML Source Editor Check[/url][/u]。
-
[color=red]Change the Location of System and Special Folders[/color]
[color=green]Windows keeps a number of special folders such as "My Documents", "Desktop", "Favorites" and the "Start Menu". These folders can be moved anywhere on you system and the new location updated in this key.[/color]
[color=blue]User Key: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders][/color]
[u][url=http://www.winguides.com/registry/display.php/107/]了解更多關於Change the Location of System and Special Folders[/url][/u]。
-
[color=red]Change Program and Common Files Directory[/color]
[color=green]This tweak allows you to change the directory used as the default location for software applications and shared files.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion]
Value Name: CommonFilesDir, ProgramFilesDir
Data Type: REG_SZ (String Value)
Value Data: Directory Name[/color]
[u][url=http://www.winguides.com/registry/display.php/1137/]了解更多關於Change Program and Common Files Directory[/url][/u]。
-
[color=red]Enable Font Smoothing on the Welcome Screen[/color] (Windows XP)
[color=green]Windows XP includes a new feature called Clear Type which is designed to make fonts more readable on LCD and low resolution screens. This tweak allows you to enable font smoothing on the Welcome screen where it is normally disabled.[/color]
[color=blue]User Key: [HKEY_CURRENT_USER\Control Panel\Desktop]
System Key: [HKEY_USERS\.DEFAULT\Control Panel\Desktop]
Value Name: FontSmoothing, FontSmoothingType
Value Data: (0 = disabled, 2 = enabled)[/color]
[u][url=http://www.winguides.com/registry/display.php/1274/]了解更多關於Enable Font Smoothing on the Welcome Screen[/url][/u]。
-
[color=red]Enable Monitor Power-off on the Logon Screen[/color]
[color=green]Normally Windows will not automatically turn off the monitor if the system is waiting at the logon screen. This setting can be used to cause the monitor to be powered-down when not in use as per the default power-saving profile.[/color]
[color=blue]Open your registry and find the key [HKEY_USERS\.DEFAULT\Control Panel\Desktop].
[b]To enable power-off on logon screen[/b]
Modify the value of "PowerOffActive" and set it to "1".
Modify the value of "ScreenSaveActive" and set it to "1".
Modify the value of "SCRNSAVE.EXE" and set it to "(None)".
Open the key [HKEY_USERS\.DEFAULT\Control Panel\PowerCfg].
Modify the value of "CurrentPowerPolicy" and set it to "0".[/color]
[u][url=http://www.winguides.com/registry/display.php/1275/]了解更多關於Enable Monitor Power-off on the Logon Screen[/url][/u]。
-
[color=red]Configure Notepad to use Word Wrap[/color]
[color=green]This setting controls whether text is wrapped onto the next line when the screen in full in Notepad. Although it can be configured by using the Edit menu in Notepad, this tweak allows you to change the word-wrap feature through the registry.[/color]
[color=blue]User Key: [HKEY_CURRENT_USER\Software\Microsoft\Notepad]
Value Name: fWrap
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = off, 1 = on)[/color]
[u][url=http://www.winguides.com/registry/display.php/1276/]了解更多關於Configure Notepad to use Word Wrap[/url][/u]。
-
[color=red]Change the Number of Page Table Entries[/color] (Windows 2000/XP)
[color=green]Page Table Entries (PTEs) may become depleted or fragmented on systems that perform a large number input/output (I/O) actions. When they become completely depleted the system may show a Stop error and halt. This tweak allows you to increase the number of PTEs available on the system.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
Value Name: SystemPages
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = system default, 110000 = maximum)[/color]
[u][url=http://www.winguides.com/registry/display.php/1277/]了解更多關於Change the Number of Page Table Entries[/url][/u]。
-
[color=red]Modify the Paged and Non Paged Pool Memory Sizes[/color] (Windows NT/2000/XP)
[color=green]Windows normally calculates the paged and non paged pool memory sizes using complex algorithms based on physical memory size. These settings allow you to override and manually specify values.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
Value Name: PagedPoolSize, NonPagedPoolSize
Data Type: REG_DWORD (DWORD Value)
Value Data: size of paged pool in bytes (default = 0)[/color]
[color=green][i][b]Note:[/b] Having invalid or values too small may cause Windows to display this error "Not enough server storage is available to process this command."[/i][/color]
[u][url=http://www.winguides.com/registry/display.php/1015/]了解更多關於Modify the Paged and Non Paged Pool Memory Sizes[/url][/u]。
-
[color=red]Remove GoTo Option on Explorer Menu[/color] (Windows NT/2000)
[color=green]This restriction can be used to remove the the GoTo menu from Tools in Explorer.[/color]
[color=blue]User Key: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
Value Name: NoGoTo
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = show, 1 = hide)[/color]
[color=green][i][b]Note:[/b] Requires Service Pack 4 for Windows NT 4.0 or Windows 2000.[/i][/color]
[u][url=http://www.winguides.com/registry/display.php/1278/]了解更多關於Remove GoTo Option on Explorer Menu[/url][/u]。
-
[color=red]Receive Notification of Missed Tasks[/color]
[color=green]By default when you are using Task Scheduler to automatically run programs you will not receive notification if a task is not run. This tweak can be used to cause Windows to show a pop-up message with the option to re-run any missed tasks.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SchedulingAgent]
Value Name: NotifyOnTaskMiss
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = no notify, 1 = notify)[/color]
[u][url=http://www.winguides.com/registry/display.php/1279/]了解更多關於Receive Notification of Missed Tasks[/url][/u]。
-
[color=red]Disable Web Content in Explorer and Desktop[/color] (Windows XP)
[color=green]This tweak can be used to disable the web content and tasks in Explorer, it will also remove the "Desktop" item from Display Properties.[/color]
[color=blue]User Key: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
System Key: [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
Value Name: ClassicShell
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = Default, 1 = Classic Desktop)[/color]
[u][url=http://www.winguides.com/registry/display.php/1282/]了解更多關於Disable Web Content in Explorer and Desktop[/url][/u]。
-
[color=red]Disable Automatic Daylight Savings Adjustment[/color] (Windows NT/2000/XP)
[color=green]Windows will normally attempt to automatically adjust the system clock for daylight saving changes based on the computer timezone. This tweak allows you to disable the automatic adjustment.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation]
Value Name: DisableAutoDaylightTimeSet
Data Type: REG_DWORD (DWORD Value)
Value Data: (1 = disable daylight-savings adjustment)[/color]
[u][url=http://www.winguides.com/registry/display.php/1283/]了解更多關於Disable Automatic Daylight Savings Adjustment[/url][/u]。
-
[color=red]Restrict Anonymous User Access[/color] (Windows NT/2000/XP)
[color=green]Windows has a feature where anonymous users can list domain user names and enumerate share names. Users who want enhanced security may optionally restrict this functionality.[/color]
[color=blue]System Key: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\LSA]
Value Name: RestrictAnonymous
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = allowed, 1 = restricted, 2 = require anonymous permissions)[/color]
[color=green][i][b]Note:[/b] Users must be using a minimum of Windows NT 4.0 with Service Pack 3 for this setting to be enabled.[/i][/color]
[u][url=http://www.winguides.com/registry/display.php/97/]了解更多關於Restrict Anonymous User Access[/url][/u]。
-
-
[QUOTE][i]最初由 素還真 發表[/i]
[B]大大別在寫了
我讀不玩啊 [/B][/QUOTE]最近不太想貼新的。
之後寫的登錄設定都是從 [url]http://www.winguides.com/registry/[/url] 抓來的,所以如果有人願意幫琥珀貼幾篇,琥珀會感謝你的!
如果有人願意翻譯為中文那就更好了。
還是這主題就到此為止了呢?可能有人覺得"反正登錄都是從該網站找的,那直接到該網站去查詢不就好了?"琥珀於是就不想再貼"新"的東西。
「象徵性大於實際使用意義」,這是琥珀接觸登錄設定以來,所得到的看法。
-
不要這樣說啦!~~~~~~~大大
我看到這篇都會將電腦拿來實驗一番
真的是不錯啦
您辛苦了
-
2 個附加檔案
附件:[color=red]刪除桌面上的資源回收筒.inf[/color]
[color=blue][Version]
Signature="$CHICAGO$"
[DefaultInstall]
DelReg=Del
[Del]
HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Desktop\NameSpace\{645FF040-5081-101B-9F08-00AA002F954E}"[/color]
[color=green]Win2000 可用。對於那些刪除檔案從不經過資源回收的使用者適用(琥珀算是其中之一)。讓桌面的圖示更少,不影響到桌布的呈現。[/color]
-
[IMG]http://myweb.hinet.net/home1/hkstm//images/Snap1.bmp[/IMG]
[IMG]http://myweb.hinet.net/home1/hkstm//images/Snap4.bmp[/IMG]
這是我在http://delphi.ktop.com.tw/抓的chm格式中文的…
分類的很清楚…不好意思盜連…請大家自己去那抓吧…不過要先註冊
-
1 個附加檔案
附件:[color=red]隱藏桌面上的我的電腦.reg[/color]
[color=blue]Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\NonEnum]
"{20D04FE0-3AEA-1069-A2D8-08002B30309D}"=dword:00000001[/color]
[color=green]Win2000 可用。對於那些不想要"我的電腦"的使用者適用。讓桌面的圖示更少,不影響到桌布的呈現。[/color]
-
1 個附加檔案
附件:[color=red]移除工具列上的搜尋.reg[/color]
[color=blue]Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoShellSearchButton"=dword:00000001[/color]
-
1 個附加檔案
附件:[color=red]隱藏我的電腦的管理(右鍵).reg[/color]
[color=blue]Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoManageMyComputerVerb"=dword:00000001[/color]