剛剛在燒svcd的時候,每次進度到了100%就會出現invalid block address
(就是buffer都降到0%了,要lead out的時候就出現invalid block address)
檔案大小為897mb,片子為90 min,software是nero5.5.8.0
本來是以為是速度太高的問題
但小弟從16x -> 12x -> 8x 都試過了
還是一樣到100%就會出現invalid block address
HD重組,嗯,試過了,也一樣
用nero先弄成image再由此image寫入...一樣
到了googld 找"invalid block address"
結果都是scsi跟nti cdmaker的比較多Q_Q我的是ide的:~
在這邊找,找到一篇也是invalid block address的...沒人回:~
還是我的檔案太大了!?
希望各位大哥大姊們能幫忙看看,謝謝
以下為錯誤碼
Nekki
FoxHound
15020-00100-16527-05452-8651
Windows 2000 5.0
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.45, size=172099 bytes, created 2002/4/15 下午 10:12:27
Nero Version: 5.5.8.0
Recorder: <TEAC CD-W512EB> Version: 2.0B - HA 1 TA 1 - 5.5.8.0
Adapter driver: <atapi> HA 1
Drive buffer : 2976kB
Bus Type : default (0) -> ATAPI
CD-ROM: <TEAC CD-540E> Version: 3.0A - HA 1 TA 0 - 5.5.8.0
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : IC35L040AVER07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IBM-DJNA-371350 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TEAC CD-540E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W512EB atapi Port 1 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 50MB (51552kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off
CD映像檔
17.4.2002
下午 03:47:48 #1 Phase 72 File dlgbrnst.cpp, Line 1449
BURN-Proof activated
下午 03:47:48 #2 Text 0 File Reader.cpp, Line 118
Reader running
下午 03:47:48 #3 Text 0 File Burncd.cpp, Line 2636
Turn on Disc-At-Once, using CD-R/RW media
下午 03:47:48 #4 IMAGEGEN -10 File ImageGen.cpp, Line 354
Image was written as DAO.
DAOI:
MediaCatalogNumber=''
TocType=0x20
Finalized=0x01
FirstTrack=0x01
LastTrack=0x02
ISRC=''
Blocksize=2336:
TrackMode='TRM_DATA_MODE2_2336'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=0 Index1FilePos=350400 NextTrackFilePos=1752000
ISRC=''
Blocksize=2336:
TrackMode='TRM_DATA_MODE2_2336'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=1752000 Index1FilePos=2102400 NextTrackFilePos=948352928
CUES:
000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
003: Ctrl=0x41 Trk= 2 (0x02) Index=00 RecDep=0x00 Start=00:08.00 ( 600)
004: Ctrl=0x41 Trk= 2 (0x02) Index=01 RecDep=0x00 Start=00:10.00 ( 750)
005: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=90:10.73 ( 405823)
下午 03:47:48 #5 Text 0 File Writer.cpp, Line 129
Writer TEAC CD-W512EB running
下午 03:47:48 #6 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (original item values)
0: TRM_DATA_MODE2_2336 (CD-ROM 模式2/XA)
2 indices, index0 (150) provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/not required, patch infos
1: TRM_DATA_MODE2_2336 (CD-ROM 模式2/XA)
2 indices, index0 (150) provided
original CD pos #750 + 405073 (405073) = #405823/90:10.73
relocatable, CD pos for caching/writing not required/not required, patch infos
--------------------------------------------------------------
下午 03:48:52 #7 Text 0 File DlgWaitCD.cpp, Line 199
Last possible write address on media: 449924 (100:00.74)
Last address to be written: 405822 (90:12.72)
下午 03:48:53 #8 Text 0 File DlgWaitCD.cpp, Line 1387
Recorder: TEAC CD-W512EB;
CDR code: 00 96 43 37; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 60 2B 25 (LI 96:43.37), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)
下午 03:48:53 #9 Text 0 File ThreadedTransferInterface.cpp, Line 834
Prepare recorder TEAC CD-W512EB for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x20 Close CD
Tracks 1 to 2:
TRM_DATA_RAW_MODE2, 2352/0x0, ISRC "", FilePos 0 352800 1764000
TRM_DATA_RAW_MODE2, 2352/0x0, ISRC "", FilePos 1764000 2116800 954848496
下午 03:48:53 #10 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CD-ROM 模式2/XA)
2 indices, index0 (150) provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/not required, patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 600 blocks [TEAC CD-W512EB ]
1: TRM_DATA_MODE2_2336 (CD-ROM 模式2/XA)
2 indices, index0 (150) provided
original CD pos #750 + 405073 (405073) = #405823/90:10.73
relocatable, CD pos for caching/writing not required/not required, patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 405073 blocks [TEAC CD-W512EB ]
--------------------------------------------------------------
下午 03:48:53 #11 Phase 36 File dlgbrnst.cpp, Line 1449
Burn process started at 12x (1,800 KB/s)
下午 03:48:53 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1960
Verifying CD position of item 0 (relocatable, no CD pos, patch infos, orig at #0): write at #0
下午 03:48:53 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1960
Verifying CD position of item 1 (relocatable, no CD pos, patch infos, orig at #750): write at #750
下午 03:48:53 #14 Text 0 File Mmc.cpp, Line 11107
StartDAO : CD-Text - Off
下午 03:48:53 #15 Text 0 File Mmc.cpp, Line 15361
Set BUFE: BURN-Proof -> ON
下午 03:48:53 #16 Text 0 File Mmc.cpp, Line 11350
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 0a 00
41 02 01 21 00 00 0c 00
41 aa 01 34 00 5a 0c 49
下午 03:56:49 #17 SCSI -1064 File Cdrdrv.cpp, Line 1413
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x07160000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x06 0x2D 0x60 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x00
下午 03:56:49 #18 MMC -1064 File Writer.cpp, Line 330
Invalid block address
下午 03:56:49 #19 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
下午 03:57:09 #20 Phase 38 File dlgbrnst.cpp, Line 1449
Burn process failed at 12x (1,800 KB/s)
下午 03:57:09 #21 Text 0 File Scsicmd.cpp, Line 386
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created 2001/3/2 下午 08:55:54
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created 2001/3/2 下午 08:55:54
 |
回覆時引用此文章
書籤