分享：HINET 1.5M 固一IP 多人連線 ZyXEL 642R-51 內部設定

Menu 1 - General Setup

System Name= Hinet-ADSL
Location= Taipei
Contact Person's Name= xxxxxxxx

Route IP= Yes
Route IPX= No
Bridge= No

Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.1
Size of Client IP Pool= 200
Primary DNS Server= 168.95.1.1
Secondary DNS Server= 168.95.192.1
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.254
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2M
Multicast= None
IP Policies= 1
Edit IP Alias= No

Menu 4 - Internet Access Setup

ISP's Name= Hinet
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 0
VCI #= 34
Service Name= N/A
My Login= N/A
My Password= N/A
Single User Account= Yes
IP Address Assignment= Static
IP Address= xxx.xxx.xxx.xxx <----------HINET給的一個IP
ENET ENCAP Gateway= xxx.xxx.xxx.xxx <----HINET給的gateway

Menu 11 - Remote Node Setup

1. Hinet (ISP, SUA)
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________

Menu 11.1 - Remote Node Profile

Rem Node Name= Hinet Route= IP
Active= Yes Bridge= No

Encapsulation= ENET ENCAP Edit PPP Options= N/A
Multiplexing= LLC-based Rem IP Addr= HINET給的gateway
Incoming: Edit IP/IPX/Bridge= No
Rem Login= N/A
Rem Password= N/A
Outgoing: Session Options:
My Login= N/A Edit Filter Sets= No
My Password= N/A PPPoE Idle Timeout(sec)= N/A
Authen= N/A PPPoE Service Name= N/A
Schedule Sets= N/A

Menu 11.3 - Remote Node Network Layer Options

VPI/VCI (LLC-mux or PPP/PPPoE Encap):IPX Options:
VPI #= 0 Rem LAN Net #= N/A
VCI #= 34 My WAN Net #= N/A
IP Options: Hop Count= N/A
Rem IP Addr: HINET給的gateway Tick Count= N/A
Rem Subnet Mask= 0.0.0.0 W/D Spoofing(min)= N/A
IP Address Assignment = Static SAP/RIP Timeout(min)= N/A
My WAN Addr= HINET給的IP Dial-On-Query= N/A
Single User Account= Yes
Metric= 2
Private= No
RIP Direction= Both Bridge Options:
Version= RIP-2M Dial-On-Broadcast= N/A
Multicast= None Ethernet Addr Timeout(min)= N/A
IP Policies=