關於 command mode & debug mode

各位大大, 你們怎麼知道該怎麼使用這兩個 mode 的指令呢?
請問一下該到哪裡找指令用法?

(我是用 zyxel 642R-51ㄉ)

[QUOTE]原始作者是 : [i] simonyang [/i]
[B]
各位大大, 你們怎麼知道該怎麼使用這兩個 mode 的指令呢?
請問一下該到哪裡找指令用法?

(我是用 zyxel 642R-51ㄉ)

[/B][/QUOTE]
下面是 Debug 模式的
<pre>
======= Debug Command Listing =======
AT just answer OK
ATHE print help
ATBAx change baudrate. 1:38.4k, 2:19.2k, 3:9.6k 4:57.6k 5:115.2k
ATENx,(y) set BootExtension Debug Flag (y=password)
ATSE show the seed of password generator
ATTI(h,m,s) change system time to hour:min:sec or show current time
ATDA(y,m,d) change system date to year/month/day or show current date
ATDS dump RAS stack
ATDT dump Boot Module Common Area
ATDUx,y dump memory contents from address x for length y
ATRBx display the 8-bit value of address x
ATRWx display the 16-bit value of address x
ATRLx display the 32-bit value of address x
ATGO(x) run program at addr x or boot router
ATGR boot router
ATGT run Hardware Test Program
ATRTw,x,y(,z) RAM test level w, from address x to y (z iterations)
ATSH dump manufacturer related data in ROM
ATDOx,y download from address x for length y to PC via XMODEM
ATTD download router configuration to PC via XMODEM
ATUR upload router firmware to flash ROM
ATLC upload router configuration file to flash ROM
ATXSx xmodem select: x=0: CRC mode(default); x=1: checksum mode
</pre>
不知道那誰有關於 command mode 的指令說明呢??

[QUOTE]原始作者是 : [i] simonyang [/i]
[B]
各位大大, 你們怎麼知道該怎麼使用這兩個 mode 的指令呢?
請問一下該到哪裡找指令用法?

(我是用 zyxel 642R-51ㄉ)

[/B][/QUOTE]
看來我是找到 關於command mode的指令介紹了
[url]http://zanolari.dyndns.org/CI_CMD/Zynos.htm[/url]