有沒有哪位大哥燒過Solaris8的光碟?

[rachel]

我下載Solaris8的iso檔(分批下載的，因為之前下載整個ISO檔都成了損壞檔)，我按照Sun的方法將三個檔案合成一個ISO，我用Nero燒，結果只燒出五個檔案，根本無法使用，這一個檔無法用WinISO來看，只能用ISOBuster來看，內容的確有535MB，Sun建議用Easy CD Creator來燒，用Nero不行嗎？
不知有那位試過呢？
謝謝

[oldtu]

可以抓取單個檔案的比較沒有問題

[small B]

我是沒有燒過Solaris8的iso檔，你可以用cd mage b5 v1.02.1看iso檔格式，若為
mode2/2332格式，則為ezcd 5專有的特殊格式，請用ezcd5燒入較安全。若不是，
在請教其他的燒入高手。

這一點國外也是抱怨連連


主旨：Re: EZCD bettter than Nero for ISO image burn ?
新聞群組：alt.comp.periphs.cdr
View: Complete Thread (6 articles) | Original Format
日期：2001-12-13 03:13:28 PST


Hello again smh

No, CDmage did not complain at all when opening the EZCD ISO file.

I will upgrade Nero to 5.5.6.1 and I will let you know the results.

It is incredibly sad what the guys at cRoxio are doing !

Thanks again for your assistance.

Rubens

--------------------------------------------------------------------
Rubens wrote:
>
> Hello smh
>
> Thanks for your reply. I have confirmed those ISO files were created
> by EZCD, but this information came from the software vendor, as I
> could not found this information examining them with CDmage.

Didn't CDmage squawk when opening the .iso?

> Concerning the burning settings, I have found from the first URL you
> have supplied that I was not using "Disk At Once" and "Finalize CD"
> (although these two setting are not mentioned by the other URLs).
>
> Anyway, even with these new settings the results were the same: Three
> files take time before start burning and one file hangs Nero. I am now
> considering an upgrade to Nero 5.5.6.1, but I have seen some bug
> reports in this newsgroup, what do you think ?

It's not the Nero; it's the .iso that's the cause. Easy CD CreMator
does not make standard .iso.

(Upgrade to Nero 5.5.6.1. Now when you burn .iso, you don't get the
prompt for the block size, etc.)

Get a load of these:

====================
From: Dean Ashton
Subject: Extracting files from an EZCD 5 .ISO image??
Date: 4/7/01

I need to extract some files from an EZCD 5 .ISO image.. But
applications such as WinImage, IsoBuster, CdMage and so on, don't
seem to like the new format .ISO used by EZCD 5 (nice one, Roxio..)

===================
From: Skip James
Subject: Re: DCD 2.5
Date: 7/1/01

As far as Easy CD Creator 5.01 goes, only issue I have with it is that
Roxio has chosen to implement a proprietary version of the ISO 9660
standard, and it will no longer extract accurate mode 1
2048-byte/sector
CD images.

====================
From: devnulluser
Subject: Unreadable .CL5/.CIF files after updating from ECDC 5.0 to
Date: 10/11/01 5.02b

I created some CD images in ECDC 5.0 some time ago where ECDC 5.0
created .CIF and .CL5 files. I then created .ISO images.

I already know ECDC 5.0 cannot re-open .ISO files and other .ISO
burning
software cannot read Roxio's proprietary .ISO files.

However, after updating from ECDC 5.0 to 5.02b, the .CL5/.CIF files are
no longer readable.

Is this a known ECDC 5.0x bug?

Will ECDC 5.1 be able to read previous .CL5/.CIF files created by ECDC
5.0 through 5.02b?
====================

What a joke!

[aerocat]

我燒過solaris 8的iso檔,但是是iso檔整個下載的.
SUN雖然建議用easy cd creater燒,但是還是可以用nero燒的,我就是用nero燒的.
只是燒完了你在winows下是按不到光碟內容的.因為格式不一樣
要確定有沒有成功就是安裝他

[rachel]

我最大的問題在於我下載整個ISO檔後，解壓縮都跟我說檔案有問題，我下載了四次，從他四個下載點都下載過，都有問題，不知該如何解決呢？

[vt167098]

我的經驗是必須要重新下載, 有錯的壓縮檔就算給妳燒起來了,用都會有問題, 是iso檔就不用解壓縮, 壓縮檔有錯用 winzip 開都開不出來, 何況是燒成光碟

最初由 rachel 發表
我最大的問題在於我下載整個ISO檔後，解壓縮都跟我說檔案有問題，我下載了四次，從他四個下載點都下載過，都有問題，不知該如何解決呢？

[nothing]

最初由 rachel 發表
我最大的問題在於我下載整個ISO檔後，解壓縮都跟我說檔案有問題，我下載了四次，從他四個下載點都下載過，都有問題，不知該如何解決呢？

如果檔案確定是沒問題的......
有可能是因為你用分割下載才會造成檔案錯誤.........
或是你可以取消電腦的Cookies.......
然後再試試.....
如果還不行.......
勸你放棄吧........
如果壓縮檔是RAR......
看看檔案是否有復原紀錄區......
也許還能用WinRAR修復壓縮檔.........