王俊斌那本有教人如何安裝kde.可是我比較想裝GNOME.
參考他的方式安裝如下:

vi /etc/make.conf 加入XFREE86_VERSION=4

#cd /usr/ports/x11/XFree86-4
#make install clean

#cd /usr/ports/x11/gnome2
#make install clean

安裝中文化字型
#cd /usr/ports/chiness/kcfonts
#make install clean

#cd /usr/ports/chiness/arphicttf
#make install clean

產生設定檔-我按照王俊斌的做法好像不對,沒有這個路徑
他的做法如下:
#XFree86 -configure
#mv ~/XF86Config.new /etc/X11/XF86Config

請問gnome2的做法應該是...??

贊助商連結

沒玩過FreeBSD...不過手上有本How to
找找看吧...:D
Try this
http://freebsd.sinica.edu.tw/zh-tut/index.html

#XFree86 -configure --> 這個執行的過程應該會提示你XF86Config.new 這個file會放到哪邊去
就像下面這樣
repsol.home.com:repsol[~]#XFree86 -configure

XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 4.8 i386 [ELF]
Build Date: 14 June 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Oct 21 03:22:10 2003
List of video drivers:
atimisc
r128
radeon
mga
glint
nv
tga
s3
s3virge
sis
rendition
neomagic
i740
tdfx
savage
cirrus
vmware
tseng
trident
chips
apm
i128
nsc
ati
i810
ark
cyrix
siliconmotion
vesa
vga
(++) Using config file: "/root/XF86Config.new"


XFree86 detected your mouse at device /dev/sysmouse.
Please check your config if the mouse is still not
operational, as by default XFree86 tries to autodetect
the protocol.

Your XF86Config file is /root/XF86Config.new

To test the server, run 'XFree86 -xf86config /root/XF86Config.new'

repsol.home.com:repsol[~]#ls -l XF86Config.new
-rw-r--r-- 1 root wheel 3040 Oct 21 03:22 XF86Config.new

來這邊參考參考

http://freebsd.sinica.edu.tw/zh-tut/xwin.html#XFREE86-4