小弟長期在站上學到不少東西，也是從站上找到資料將自己的Giga ADSL（642R-51中區電信第一批）改成硬體撥接，並透過Hub讓三部電腦同時上網。
最近幫友人改HiNet ADSL（計時制，642M-12中區電信第三批）改成硬體撥接，ROM及BIN檔都修正成功，但是都無法上網（Ping 168.95.192.1或是直接執行IE都無效）。
裝機地點：台中縣潭子鄉
系統：WinMe
IP：192.168.1.2
Subnet Mask= 255.255.255.0
Gateway =192.168.1.1
以下是設定參數，煩請各位高手告知哪裡設錯了？？謝謝！！

----------------------------------------------------------------------------

Copyright (c) 1994 - 2000 ZyXEL Communications Corp.

Prestige 642 Main Menu

Getting Started Advanced Management
1. General Setup 21. Filter Set Configuration
3. Ethernet Setup 22. SNMP Configuration
4. Internet Access Setup 23. System Password
24. System Maintenance
25. IP Routing Policy Setup
Advanced Applications 26. Schedule Setup
11. Remote Node Setup
12. Static Routing Setup
15. SUA Server Setup 99. Exit






Enter Menu Selection Number:

----------------------------------------------------------------------------

Menu 1 - General Setup

System Name= HiNet
Location=
Contact Person's Name=


Route IP= Yes
Route IPX= No
Bridge= No

----------------------------------------------------------------------------
第一次設定
Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP Setup
DHCP= None
Client IP Pool Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
Secondary DNS Server= N/A
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= IGMP-v2
IP Policies=
Edit IP Alias= No

----------------------------------------------------------------------------
第二次設定
Menu 3.2 - TCP/IP and DHCP Ethernet Setup

DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.2
Size of Client IP Pool= 6
Primary DNS Server= 168.95.192.1
Secondary DNS Server= 168.95.1.1
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= IGMP-v2
IP Policies=
Edit IP Alias= No

----------------------------------------------------------------------------

Menu 4 - Internet Access Setup

ISP's Name= HiNet
Encapsulation= PPPoE
Multiplexing= LLC-based
VPI #= 0
VCI #= 33
Service Name= HiNet
My Login= ********@hinet.net
My Password= ********
Single User Account= Yes
IP Address Assignment= Dynamic
IP Address= N/A
ENET ENCAP Gateway= N/A

----------------------------------------------------------------------------

Menu 11.1 - Remote Node Profile

Rem Node Name= HiNet Route= IP
Active= Yes Bridge= No

Encapsulation= PPPoE Edit PPP Options= No
Multiplexing= LLC-based Rem IP Addr= 0.0.0.0
Incoming: Edit IP/IPX/Bridge= No
Rem Login= ********@hinet.net
Rem Password= ********
Outgoing: Session Options:
My Login= ********@hinet.net Edit Filter Sets= No
My Password= ******** PPPoE Idle Timeout(sec)= 100
Authen= CHAP/PAP PPPoE Service Name= HiNet
Schedule Sets= 1, 1, 1, 1

----------------------------------------------------------------------------

Menu 15 - SUA Server Setup


Port # IP Address
------ ---------------
1.Default 192.168.1.2
2. 80 192.168.1.2
3. 0 0.0.0.0
4. 0 0.0.0.0
5. 0 0.0.0.0
6. 0 0.0.0.0
7. 0 0.0.0.0
8. 0 0.0.0.0

----------------------------------------------------------------------------

贊助商連結

1.Default 192.168.1.2
PPPoE Idle Timeout(sec)= 0
用第一次的設定,網卡加設DNS組態
主電腦:隨便
DNS ip:168.95.1.1
168.95.192.1
試試看吧:D :D :D :D

最初由 ah0705
1.Default 192.168.1.2
PPPoE Idle Timeout(sec)= 0
用第一次的設定,網卡加設DNS組態
主電腦:隨便
DNS ip:168.95.1.1
168.95.192.1
試試看吧:D :D :D :D

最初由 ah0705
1.Default 192.168.1.2
PPPoE Idle Timeout(sec)= 0
用第一次的設定,網卡加設DNS組態
主電腦:隨便
DNS ip:168.95.1.1
168.95.192.1
試試看吧:D :D :D :D
還有PPPoE Service Name= Any
案的太極了所以浪費了版面,感到十分抱歉

系統內的DNS設定原始就是
啟動DNS，主電腦：pc，網域：hinet.net
168.95.192.1
168.95.1.1
結果一樣不行。:confused:

你朋友是否曾經換租過ISP業者,
如果有的話,請將VCI=34,
因為只要有更動ISP業者,VCI的設定就會在33,34兩個CHANEL之間切換

今日，小弟將 PPPoE Service Name 改成 “Any” ，友人的HINET ADSL
已經可以順利撥出，感謝各位的幫忙。
:D :D :D