【下載】NetIQ: Qcheck - Network Performance Measurement



贊助商連結


FYI
2006-11-05, 11:15 AM
NetIQ: Qcheck - Network Performance Measurement (http://www.netiq.com/Qcheck/default.asp)

The free Qcheck utility is now distributed exclusively by IXIA. Visit the IXIA web site to download Qcheck (http://www.ixiacom.com/products/performance_applications/pa_display.php?skey=pa_q_check).

贊助商連結


FYI
2008-08-12, 05:26 PM
除了NetIQ's Qcheck 之外, Iperf 也是一個不錯的頻寬測試工具, 而且免費

NLANR/DAST : Iperf - The TCP/UDP Bandwidth Measurement Tool (http://dast.nlanr.net/Projects/Iperf/)

Iperf is a tool to measure maximum TCP bandwidth, allowing the tuning of various parameters and UDP characteristics. Iperf reports bandwidth, delay jitter, datagram loss.
Iperf (http://iperf.sourceforge.net/) (Jperf 包含Iperf win32 舊版, 或直接下載Iperf 1.7.0 win32 binary (http://www.noc.ucf.edu/Tools/Iperf/iperf.exe))

FYI
2008-08-13, 01:12 AM
Netperf Homepage (http://www.netperf.org)

Netperf is a benchmark that can be used to measure the performance of many different types of networking. It provides tests for both unidirecitonal throughput, and end-to-end latency. The environments currently measureable by netperf include:

TCP and UDP via BSD Sockets for both IPv4 and IPv6
DLPI
Unix Domain Sockets
SCTP for both IPv4 and IPv6
Netperf 2.4.3 Online Manual (HTTP) (http://www.netperf.org/svn/netperf2/tags/netperf-2.4.3/doc/netperf.html)
Netperf 2.1 Manual (PDF) (ftp://ftp.netperf.org/netperf/archive/netperf_2.1_manual.pdf)
netperf-2.1 Win32 Binary (ftp://ftp.cup.hp.com/dist/networking/benchmarks/netperf/binaries/2.1/win32/x86/)

Network Test Tools (http://staff.science.uva.nl/~jblom/gigaport/tools/test_tools.html)
UDPmon Home Page (http://www.hep.manchester.ac.uk/u/rich/net/)

FYI
2008-08-13, 05:37 AM
本站 wschen (友站matrix21 (http://forum.pcdvd.com.tw/member.php?u=96437)) 網友所寫的測試IP分享器 session 數目的小程式, 但原始網頁 "http://matrix21.myweb.hinet.net/p4.htm" 已不存在, 小弟估計應該可以計算到五萬個sessions 以上, 但小弟不知道程式所使用的計數器, 是否16 位元整數? 就算只能支援2.5 萬, 也足以應付一般家用分享器, 測試時Client 端請勿執行其他網路應用程式, 如果要測試超大session 數, 請增加幾組電腦, 同時執行, 可以得到約略的數字

Client 端的 IP 為 192.168.1.41,Server 端的 IP 為 192.168.2.254,各位需要把 IP 分享器的連線模式設定成 Static ,且 LAN 的 IP 為 192.168.1.254,WAN 的 IP 為 192.168.2.1,Gateway 為 192.168.2.254。
底下的程式為 console mode,所以需要用命令提示字元來執行(我懶得改寫成視窗版,大家將就用吧)
Server 端執行命令為“server 192.168.2.254 12345”,意思為 server listen 在 12345 的 port 上面。
Client 端執行命令為“client 192.168.1.41 20000 192.168.2.254 12345”,意思為 client 從 port 20000 開始建 session 到 server 的 port 12345。
如果沒有看到什麼錯誤訊息,各位應該可以看到 client 端有一個 session 數字一直在增加,等到 client 的數字停了,那個數字大概就是你的 IP 分享器所能夠建立的 session 數目,若是遇到錯誤訊息,建議把 client 的 start port 數字增加(建議為 20000)重跑,這樣子應該很清楚了吧 在測試之前,記得把 IP 分享器重新開機把記憶體清空,這樣測出來的數據會比較準確。另外,如果有設定 DMZ 或 Virtual Server 也請一併先關掉,然後再跑測試程式。

TL-WR541G Rank the First in the Comparison Test Conducted by the HongKong Medium "e-zone" (http://www.tp-link.com/news/shownews.asp?id=8)
下載 "matrix21.rar (http://www.pczone.com.tw/attachments/16/15744d1218564328.attachment)" (無法找到原作者的網頁, 本檔案由tvirus 網友提供)

FYI
2008-09-28, 04:25 PM
以下並非用於測試效能, 而是測試NAT 特性, 由於NAT 的複雜性, 測試結果有可能不準確, 所以僅能當作參考

NAT-Tester University of Tuebingen - WSI-RI (http://gex.cs.uni-tuebingen.de)
FreeWorldDialup Netcheck (http://downloads.fwdnet.net/netcheck.exe)

FYI
2009-02-11, 07:33 PM
SmallNetBuilder - Measuring Network Performance - Iperf (http://www.smallnetbuilder.com/content/view/30388/235/)
SmallNetBuilder - Measuring Network Performance - Jperf (http://www.smallnetbuilder.com/content/view/30408/235/)
SmallNetBuilder - Measuring Network Performance - Jperf and TCP, Part 2 (http://www.smallnetbuilder.com/content/view/30418/235/)
SmallNetBuilder - Measuring Network Performance - NetMeter (http://www.smallnetbuilder.com/content/view/30366/235/)

FYI
2011-08-30, 05:04 AM
LAN Speed Test v1.0 (http://www.totusoft.com/lanspeed1.html) (Freeware)
LAN Speed Test Server (http://www.totusoft.com/lanspeedserver.html)