最初由 charlesliao


試一下 ping 192.168.1.1
看看有沒有像下面回應...

C:\>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time<10ms TTL=30
Reply from 192.168.1.1: bytes=32 time<10ms TTL=30
Reply from 192.168.1.1: bytes=32 time<10ms TTL=30
Reply from 192.168.1.1: bytes=32 time<10ms TTL=30

Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms



C:\>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
我的卻是這樣???
C:\>

贊助商連結

有的 atu-r 其硬體位置是 10.0.0.1 或者是你的 Gateway 或者是 Submask

設定有錯誤 !

最初由 slmonkey


1.您是固定制還是計時制,如果是固定制則直接用瀏覽器或是telnet 您的getway, 計時制的話您目前可以撥接上網嗎?
2.ATU-R是直接接到您的PC嗎?
3.IP 192.168.1.2, Submask 255.255.255.0,Getway 192.168.1.1 是設定在網卡嗎?
4.設定網卡完成後, 只需將網卡停用再啟動即可將該IP生效,毋須重開機.

按照前輩的方法做
192.168.1.1
guest
12345
但是弟的畫面卻是
Downstream Fast Channel: kbps
Upstream Fast Channel: kbps
Downstream Interleaved Channel: kbps
Upstream Interleaved Channel: kbps
Downstream Noise Margin: dB
Upstream Noise Margin: dB
Downstream Attenuation: dB
Upstream Attenuation: dB

沒有速率顯示這是哪裡出問題？
請前輩們不吝指教。

我是第三批的..
有人知道密碼嗎..

那第三批第一次呢?