會員 | 合勤 ZyNOS Debug Mode 指令 合勤Debug Mode 指令 AT Just answer OK ATHE Print help ATBAx Change baudrate x = 1: 38.4 Kbps (38400 bps) x = 2: 19.2 Kbps (19200 bps) x = 3: 9.6 Kbps (9600 bps) x = 4: 57.6 Kbps (57600 bps) x = 5: 115.2 Kbps (115200 bps) ATENx,[y] Set BootExtension Debug Flag y = password ATSE Show the seed of password generator ATTI[h,m,s] Show current time or change system time h = hours m = minutes s = seconds ATDA[y,m,d] Show current date or change system date y = year m = month d = day ATDS Dump RAS stack ATDT Dump Boot Module Common Area ATDUx,y Dump memory contents from address x for length y ATWBx,y Write address x with 8-bit value y ATWWx,y Write address x with 16-bit value y ATWLx,y Write address x with 32-bit value y ATRBx Display the 8-bit value of address x ATRWx Display the 16-bit value of address x ATRLx Display the 32-bit value of address x ATGO[x] Run program at addr x or boot router ATGR Boot router ATGT Run Hardware Test Program AT%Tx Enable Hardware Test Program at boot up ATBTx Block write enable (x=1: enable, other: disable) ATRTw,x,y[,z] RAM test level w, from address x to y (z iterations) ATWEa[,b,c,d] Write MAC addr, Country code, EngDbgFlag, FeatureBit to flash ROM ATCUx Write Country code to flash ROM ATCB Copy from FLASH ROM to working buffer ATCL Clear working buffer ATSB Save working buffer to FLASH ROM ATBU Dump manufacturer related data in working buffer ATSH Dump manufacturer related data in ROM ATWMx Set MAC address in working buffer ATCOx Set country code in working buffer ATFLx Set EngDebugFlag in working buffer ATSTx Set ROMRAS address in working buffer ATSYx Set system type in working buffer ATVDx Set vendor name in working buffer ATPNx Set product name in working buffer ATFEx,y,... Set feature bits in working buffer ATMP Check & dump memMapTab ATDOx,y Download from address x for length y to PC via XMODEM ATTD Download router configuration to PC via XMODEM ATUPx,y Upload to RAM address x for length y from PC via XMODEM ATUR Upload router firmware to flash ROM ATLC Upload router configuration file to flash ROM ATUXx(,y) XMODEM upload from flash block x to y ATERx,y Erase flash rom from block x to y ATWFx,y,z Copy data from addr x to flash addr y, length z ATXSx XMODEM select x = 0: CRC mode (Default) x = 1: Checksum mode ATLOa,b,c,d Int/Trap Log Cmd ATSR System reboot |
回覆 |
|
類似的主題 | ||||
主題 | 主題作者 | 討論版 | 回覆 | 最後發表 |
【求助】請問有人對 ZyNOS debug mode 下 baudrate 設定成 115200 bps , 測過速率嗎? | uhdken | -- 網 路 硬 體 版 | 1 | 2010-06-17 02:09 PM |
【轉貼】642r Debug PPPoE Connection | purk | ---- ADSL 軟 硬 體 技 術 | 2 | 2002-10-16 01:28 AM |
DeBug Mode有哪些指令? | cry_a | ---- ADSL 軟 硬 體 技 術 | 5 | 2001-08-26 03:56 PM |
642R Debug Command Listing | Star69 | ---- ADSL 軟 硬 體 技 術 | 3 | 2001-03-29 02:33 AM |
關於 command mode & debug mode | simonyang | ---- ADSL 軟 硬 體 技 術 | 2 | 2001-03-28 05:50 PM |
XML | RSS 2.0 | RSS |
本論壇所有文章僅代表留言者個人意見,並不代表本站之立場,討論區以「即時留言」方式運作,故無法完全監察所有即時留言,若您發現文章可能有異議,請 email :[email protected] 處理。