新的雷管2832版好刺眼啊...看來垂直更新率只有60Hz...怎麼辦呢...CHECK IT OUT！！

[OSCAR767676]

這玩意兒就是簡單鎖定更新率的軟體哦∼
安裝完了後
在C:\Program Files\MultiRes\裡面有一個MultiRes.inf
打開後
你就知道怎麼改啦∼
舉個例:
32-1024x768=75
32就是32位元色深的顏色
1024x768....不用解釋吧？
=75就是鎖定在75Hz，這項可以自由改∼
記得要把lock=0改成lock=1

還有三種方法：
是用PowerStrip註冊過的版本改
或用Regedit改
還有用NVidia Refresh Rate Fix改，樓下的賽法兄有貼修正檔

PS：此軟體適用其他牌的顯示卡。這軟體應該不用常駐吧！？


補上一個正確的用法：

You frequently run Direct3D or OpenGL games at 800x600x32bpp, but they default to 60Hz whereas you wish to run them at 100Hz. To resolve this problem with MultiRes, do the following:



enable “Lock refresh rates” in the MultiRes About box
switch your desktop to “TrueColor (32 bit) - 800x600” in the MultiRes menu
switch your desktop to a refresh rate of 100Hz in the MultiRes > Refresh Rate menu (this records 100Hz as your preferred refresh rate whenever the display switches to 800x600x32bpp)
switch back to your normal desktop resolution


In future, whenever you run a program that switches to 800x600x32bpp, MultiRes will attempt to impose a refresh rate of 100Hz on it, as well as on all resolutions below it for which a refresh rate has not been explicitly selected. For higher resolutions, steps 2 and 3 must be repeated as needed.



Example 2

Your monitor and graphics card support up to 1600x1200 at 85Hz, and you want all resolutions locked at 85Hz. Do the following:



enable “Lock refresh rates” in the MultiRes About box
witch your desktop to “TrueColor (32 bit) - 1600x1200” (or any other color depth) in the MultiRes menu
switch your desktop to a refresh rate of 85Hz in the MultiRes > Refresh Rate menu (this records 85Hz as your preferred refresh rate whenever the display switches to 1600x1200 and all lower resolutions)
switch back to your normal desktop resolution


Important!: If you cannot select a specific refresh rate for the desktop in Windows Display properties, MultiRes will not able to provide it, much less lock it down.

[Alive]

謝謝您的熱心

[foxbrian]

除了lock=0改成lock=1
還要改什麼呢,不好意思~麻煩教一下~謝謝!!

[Seifer]

方便po其他兩種方法嗎?
因為這一個程式要常駐覺得粉不方便^^"
NVidia Refresh Rate Fix用習慣了 不用掛程式常駐 蠻不錯的 只可惜不支援到28.32
所以想請您po其他方法
謝謝^^

[foxbrian]

另外,我比較了23.11跟28.32
發現23.11效能反而較好(GF3 ti 200)
多了一百分左右(3700-->3800,我的分數沒問題,因為CPU比較慢^^")
大陸網站的測試:
http://www.pcpop.com.cn/readnews.asp?id=6593

[OSCAR767676]

我已經把文章修改了，可以看看∼
至於有人堅持用效能 比較好的23.1x版，只因為3DMARK2001 ？其實我建議用28.32，它修正了很多臭蟲，也比較穩定，實質上在遊戲中效能真的比較好，看來已經有人被MadOnion 洗腦了...

[Seifer]

Nvidia 28.32 Detonator Drivers for Windows 2K/XP with the Refresh Rate Fix

[foxbrian]

最初由 OSCAR767676 發表
我已經把文章修改了，可以看看∼
至於有人堅持用效能 比較好的23.1x版，只因為3DMARK2001 ？其實我建議用28.32，它修正了很多臭蟲，也比較穩定，實質上在遊戲中效能真的比較好，看來已經有人被MadOnion 洗腦了...

-----------------------
其實我之前是用27.70,顯示卡剛買不久,穩定度尚未測試,
這兩天灌了28.32,看到有網友說23.11效能比較好,就親身比較了一下
既然28.32穩定度比較高,當然用這個版本~也多謝OSCAR767676兄賜教

3Dmark 2001的分數....老實說,還是會有點在意,但我注重穩定度更勝於
效能~~

[vik777]

最初由 Seifer 發表
Nvidia 28.32 Detonator Drivers for Windows 2K/XP with the Refresh Rate Fix

請問一下
要如何使用ㄋ??
thx~~~~~~~~

[Seifer]

最初由 vik777 發表


請問一下
要如何使用ㄋ??
thx~~~~~~~~

用WinRAR 把原本的Win2K-XP_23.11.exe解壓縮開來
然後把nv4_disp.zip檔也解壓縮 得到的nv4_disp.inf檔 覆蓋過去
再安裝 就ok嚕