VicLin
2002-12-21, 01:10 AM
Nero Version: 5.5.9.0
Recorder: <AOPEN CD-RW CRW2040> Version: 1.01 - HA 1 TA 0 - 5.5.9.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <PIONEER DVD-ROM DVD-116>Version: 1.22 - HA 0 TA 1 - 5.5.9.0
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 4K040H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : AOPEN CD-RW CRW2040 atapi Port 1 ID 0 DMA: On
=======================
AutoRun : 0
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261596kB)
Free physical memory: 164MB (167964kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
CD-ROM (ISO)
21.12.2002
上午 01:02:22 #1 Text 0 File Isodoc.cpp, Line 6002
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
上午 01:02:22 #2 Text 0 File Reader.cpp, Line 118
Reader running
上午 01:02:22 #3 Text 0 File Writer.cpp, Line 129
Writer AOPEN CD-RW CRW2040 running
上午 01:02:22 #4 Text 0 File Burncd.cpp, Line 3474
Turn on Track-At-Once, using CD-R/RW media
上午 01:02:22 #5 ISO9660GEN -11 File geniso.cpp, Line 4427
First writeable address = 0 (0x00000000)
上午 01:02:23 #6 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
上午 01:02:35 #7 Text 0 File DlgWaitCD.cpp, Line 198
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 599 ( 0:09.74)
上午 01:02:36 #8 Text 0 File DlgWaitCD.cpp, Line 1393
Recorder: AOPEN CD-RW CRW2040;
CDR code: 00 97 24 15; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 0F (LI 97:24.15), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
上午 01:02:38 #9 Text 0 File BurnCDUtil.h, Line 321
對於這張光碟，只能以12x 倍速燒錄，無法使用20x 倍速
上午 01:02:38 #10 Text 0 File ThreadedTransferInterface.cpp, Line 835
Prepare recorder AOPEN CD-RW CRW2040 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 1536000
上午 01:02:38 #11 Text 0 File ThreadedTransferInterface.cpp, Line 863
Removed 2 run-out blocks from end of track 1.
上午 01:02:38 #12 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [AOPEN CD-RW CRW2040 ]
--------------------------------------------------------------
上午 01:02:38 #13 Phase 24 File dlgbrnst.cpp, Line 1560
Caching of files started
上午 01:02:38 #14 Phase 25 File dlgbrnst.cpp, Line 1560
Caching of files completed
上午 01:02:38 #15 Phase 36 File dlgbrnst.cpp, Line 1560
Burn process started at 12x (1,800 KB/s)
上午 01:02:39 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1967
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
上午 01:02:39 #17 Text 0 File Mmc.cpp, Line 16205
Set BUFE: JustLink -> OFF , JustSpeed : ON
上午 01:02:49 #18 SCSI -1152 File Cdrdrv.cpp, Line 1406
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03610000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0
上午 01:02:49 #19 MMC -1152 File Writer.cpp, Line 330
Medium speed error
上午 01:02:49 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
上午 01:02:49 #21 CDR -201 File WriterStatus.cpp, Line 187
Invalid writestate
上午 01:02:49 #22 TRANSFER -18 File WriterStatus.cpp, Line 187
Could not perform EndTrack
上午 01:02:49 #23 SCSI -1176 File Cdrdrv.cpp, Line 1202
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x04
上午 01:02:49 #24 MMC -1176 File WriterStatus.cpp, Line 226
Session fixation error
上午 01:02:49 #25 TRANSFER -19 File WriterStatus.cpp, Line 226
Could not perform Fixation
上午 01:02:49 #26 Text 0 File WriterStatus.cpp, Line 235
falling back to disc fixation
上午 01:02:49 #27 SCSI -1176 File Cdrdrv.cpp, Line 1202
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x04
上午 01:02:49 #28 MMC -1176 File WriterStatus.cpp, Line 226
Session fixation error
上午 01:02:49 #29 TRANSFER -19 File WriterStatus.cpp, Line 226
Could not perform Fixation
上午 01:02:49 #30 Phase 38 File dlgbrnst.cpp, Line 1560
Burn process failed at 12x (1,800 KB/s)
上午 01:02:49 #31 Text 0 File Scsicmd.cpp, Line 383
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----------------------------------------
這是錯誤的訊習
這就是挑片嗎:confused:
我沒碰過挑片
所以不清楚
燒入小機機:AOpen CD-RW CR W2040 20x10x40x
騙子:Sony 40X 700MB 白金片
贊助商連結
Recorder: <AOPEN CD-RW CRW2040> Version: 1.01 - HA 1 TA 0 - 5.5.9.0
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <PIONEER DVD-ROM DVD-116>Version: 1.22 - HA 0 TA 1 - 5.5.9.0
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 4K040H2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : AOPEN CD-RW CRW2040 atapi Port 1 ID 0 DMA: On
=======================
AutoRun : 0
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261596kB)
Free physical memory: 164MB (167964kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
CD-ROM (ISO)
21.12.2002
上午 01:02:22 #1 Text 0 File Isodoc.cpp, Line 6002
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
上午 01:02:22 #2 Text 0 File Reader.cpp, Line 118
Reader running
上午 01:02:22 #3 Text 0 File Writer.cpp, Line 129
Writer AOPEN CD-RW CRW2040 running
上午 01:02:22 #4 Text 0 File Burncd.cpp, Line 3474
Turn on Track-At-Once, using CD-R/RW media
上午 01:02:22 #5 ISO9660GEN -11 File geniso.cpp, Line 4427
First writeable address = 0 (0x00000000)
上午 01:02:23 #6 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
上午 01:02:35 #7 Text 0 File DlgWaitCD.cpp, Line 198
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 599 ( 0:09.74)
上午 01:02:36 #8 Text 0 File DlgWaitCD.cpp, Line 1393
Recorder: AOPEN CD-RW CRW2040;
CDR code: 00 97 24 15; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 0F (LI 97:24.15), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
上午 01:02:38 #9 Text 0 File BurnCDUtil.h, Line 321
對於這張光碟，只能以12x 倍速燒錄，無法使用20x 倍速
上午 01:02:38 #10 Text 0 File ThreadedTransferInterface.cpp, Line 835
Prepare recorder AOPEN CD-RW CRW2040 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 1536000
上午 01:02:38 #11 Text 0 File ThreadedTransferInterface.cpp, Line 863
Removed 2 run-out blocks from end of track 1.
上午 01:02:38 #12 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 600 (600) = #600/0:8.0
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [AOPEN CD-RW CRW2040 ]
--------------------------------------------------------------
上午 01:02:38 #13 Phase 24 File dlgbrnst.cpp, Line 1560
Caching of files started
上午 01:02:38 #14 Phase 25 File dlgbrnst.cpp, Line 1560
Caching of files completed
上午 01:02:38 #15 Phase 36 File dlgbrnst.cpp, Line 1560
Burn process started at 12x (1,800 KB/s)
上午 01:02:39 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1967
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
上午 01:02:39 #17 Text 0 File Mmc.cpp, Line 16205
Set BUFE: JustLink -> OFF , JustSpeed : ON
上午 01:02:49 #18 SCSI -1152 File Cdrdrv.cpp, Line 1406
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03610000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0
上午 01:02:49 #19 MMC -1152 File Writer.cpp, Line 330
Medium speed error
上午 01:02:49 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
上午 01:02:49 #21 CDR -201 File WriterStatus.cpp, Line 187
Invalid writestate
上午 01:02:49 #22 TRANSFER -18 File WriterStatus.cpp, Line 187
Could not perform EndTrack
上午 01:02:49 #23 SCSI -1176 File Cdrdrv.cpp, Line 1202
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x04
上午 01:02:49 #24 MMC -1176 File WriterStatus.cpp, Line 226
Session fixation error
上午 01:02:49 #25 TRANSFER -19 File WriterStatus.cpp, Line 226
Could not perform Fixation
上午 01:02:49 #26 Text 0 File WriterStatus.cpp, Line 235
falling back to disc fixation
上午 01:02:49 #27 SCSI -1176 File Cdrdrv.cpp, Line 1202
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x04
上午 01:02:49 #28 MMC -1176 File WriterStatus.cpp, Line 226
Session fixation error
上午 01:02:49 #29 TRANSFER -19 File WriterStatus.cpp, Line 226
Could not perform Fixation
上午 01:02:49 #30 Phase 38 File dlgbrnst.cpp, Line 1560
Burn process failed at 12x (1,800 KB/s)
上午 01:02:49 #31 Text 0 File Scsicmd.cpp, Line 383
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----------------------------------------
這是錯誤的訊習
這就是挑片嗎:confused:
我沒碰過挑片
所以不清楚
燒入小機機:AOpen CD-RW CR W2040 20x10x40x
騙子:Sony 40X 700MB 白金片
贊助商連結