幫我看一下....一堆英文字...



贊助商連結


cwj
2002-08-19, 02:05 AM
***STOP:0*0000000D1 (0*00000000,0*00000002,0*00000001,0*Fc99815F)
DRIVER_IRQL_NOT_OR_EQUAL
***Address Fc99815F base at fc996000,datestamp sa0cb46e-scsiport,sys
if this is the firsttime you've seen this stop error screen,
restart your computer,if this screen appears agin ,follow
these steps:
check to make sure any new hardware or software is properly installed for any windows 2000 updates you might need.
if problmes contine,disable or remove any newly installed
hardware or software,Disable BIOS memory options such as
caching or shadowing terminated . If you need to use safe mode to remove or disable components,restart your computer,press F8 to select Advanced startup options,and then select safe mode.

Refer to your Getting started manual for more information on troubleshooting stop errors.
幫我看一下這是怎麼回事丫....THX

贊助商連結


Schnaufer
2002-08-19, 02:14 AM
Interpreting the Message

  This Stop message has four parameters:

1. Memory referenced.
2. IRQL at time of reference.
3. Type of access (0x00000000 = read operation, 0x00000001 = write operation).
4. Address that referenced memory.

Resolving the Problem

  Stop 0xD1 messages can occur after installing faulty drivers or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error. If so, contact the manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.

  Error Message: STOP 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL (http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q293077&)
  Adding a Second Mylex AcceleRAID SCSI Controller Causes an Error Message (http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q314908&)

  還有其他很多可能的原因,你必須要補充說明一下更多的軟硬體資訊以及當機前有哪些事件發生,才能更進一步診斷。

cwj
2002-08-19, 02:19 AM
最初由 Schnaufer 發表
Interpreting the Message

  This Stop message has four parameters:

1. Memory referenced.
2. IRQL at time of reference.
3. Type of access (0x00000000 = read operation, 0x00000001 = write operation).
4. Address that referenced memory.

Resolving the Problem

  Stop 0xD1 messages can occur after installing faulty drivers or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error. If so, contact the manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.
謝謝你...請問你是怎麼查的丫....我查都查不到...

Schnaufer
2002-08-19, 02:24 AM
  你原文的錯字不少,不過能辨識出 0x000000D1 就可以找到很多的資訊,再輔以其他的文字說明及錯誤碼後面四個參數,原則上是可以有比較大的機會找到問題所在,但許多的電腦問題是無法 100 % 解決的。

皮耶
2002-08-19, 02:26 AM
我不知道問題出在哪,但我幫你翻譯一下,翻的不好請見諒...
-------------------------------------------------------------------------------------
如你果第一次看到這個錯誤訊息,重新開機,如果此畫面再次出現,請做以下這些步驟:
檢查並確定任何新安裝的硬體或軟體已預先安裝你可能需要的WINDOWS 2000修正檔。
如果問題仍然存在,關閉或移除任何新安裝的硬體或軟體,關閉BIOS記憶體選項裡的快取或映射,
如果你需要使用安全模式以移除或關閉元件,重新開機,按下F8選擇進階啟事選項,然後選擇安全模式。

查詢你的使用手冊以獲得疑難排解停止錯誤的更多資訊。

cwj
2002-08-19, 09:40 PM
有沒有可能是硬碟或者哪裡出錯丫..