kuarcis
2002-07-07, 11:12 AM
我在昨天用ricoh mp7240a +nero 5582來做cdrw的抹除
可是做完抹除後,燒錄機不管用甚麼片下去燒,通通都會回報Medium speed error
而且不只用nero燒,用clonecd或cdrwin都一樣會回報Medium speed error
經過我試了老半天的結果,我又發現
只有原來拿去做抹除的那種cdrw才能正常燒錄!!@@||
而且經我老爸一提我才想起,我那另一台mp7060也是這樣子之後就不吃任何片子了
不過連原來作抹除的那種cdrw都不吃了,為甚麼會這樣呢?
在最後附上nero存下來的log:
Windows XP 5.1
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 2002/5/6 上午 11:01:22
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.44, size=172099 bytes, created 2002/7/6 下午 01:01:43
Nero Version: 5.5.8.2
Recorder: <RICOH CD-R/RW MP7240A> Version: 2.02 - HA 2 TA 1 - 5.5.8.2
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <Copystar FANTOM DVDROM> Version: 1.0g - HA 0 TA 0 - 5.5.8.2
Adapter driver: <Copystar> HA 0
Bus Type : default (0) -> SCSI
=== Scsi-Device-Map ===
CdRomPeripheral : CopystarFANTOM DVDROM 1.0g Copystar Port 0 ID 0 DMA: ?
CdRomPeripheral : RICOH CD-R/RW MP7240A atapi Port 2 ID 1 DMA: On
DiskPeripheral : IBM-DTTA-350640 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD-165P atapi Port 3 ID 1 DMA: On
DiskPeripheral : QUANTUM FIREBALLP LM20.5 atapi Port 4 ID 0 DMA: On
DiskPeripheral : ST330620A atapi Port 4 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261600kB)
Free physical memory: 91MB (94004kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off
CD-ROM (ISO)
7.7.2002
上午 11:07:50 #1 Text 0 File Isodoc.cpp, Line 5383
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : Multibyte
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
上午 11:07:50 #2 Phase 75 File dlgbrnst.cpp, Line 1550
JustLink activated
上午 11:07:50 #3 Text 0 File Reader.cpp, Line 118
Reader running
上午 11:07:50 #4 Text 0 File Writer.cpp, Line 129
Writer RICOH CD-R/RW MP7240A running
上午 11:07:50 #5 Text 0 File Burncd.cpp, Line 2778
Turn on Track-At-Once, using CD-R/RW media
上午 11:07:50 #6 ISO9660GEN -11 File geniso.cpp, Line 4428
First writeable address = 0 (0x00000000)
上午 11:07:50 #7 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 9333 (9333) = #9333/2:4.33
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
上午 11:07:51 #8 Text 0 File DlgWaitCD.cpp, Line 199
Last possible write address on media: 336224 (74:44.74)
Last address to be written: 9332 ( 2:06.32)
上午 11:07:52 #9 Text 0 File DlgWaitCD.cpp, Line 1394
Recorder: RICOH CD-R/RW MP7240A;
CDR code: 00 97 31 01; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1F 01 (LI 97:31.01), 3: 4A 2D 00 (LO 74:45.00)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
上午 11:07:54 #10 Text 0 File ThreadedTransferInterface.cpp, Line 834
Prepare recorder RICOH CD-R/RW MP7240A for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 19421184
上午 11:07:54 #11 Text 0 File ThreadedTransferInterface.cpp, Line 862
Removed 2 run-out blocks from end of track 1.
上午 11:07:54 #12 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 9333 (9333) = #9333/2:4.33
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 9331 blocks [RICOH CD-R/RW MP7240A ]
--------------------------------------------------------------
上午 11:07:54 #13 Phase 24 File dlgbrnst.cpp, Line 1550
Caching of files started
上午 11:07:54 #14 Phase 25 File dlgbrnst.cpp, Line 1550
Caching of files completed
上午 11:07:54 #15 Phase 36 File dlgbrnst.cpp, Line 1550
Burn process started at 24x (3,600 KB/s)
上午 11:07:54 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1961
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
上午 11:07:54 #17 Text 0 File Mmc.cpp, Line 15735
Set BUFE: JustLink -> ON , JustSpeed : ON
上午 11:08:08 #18 SCSI -1152 File Cdrdrv.cpp, Line 1399
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x05050000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0
上午 11:08:08 #19 MMC -1152 File Writer.cpp, Line 330
Medium speed error
上午 11:08:08 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
上午 11:08:08 #21 CDR -201 File WriterStatus.cpp, Line 186
Invalid writestate
上午 11:08:08 #22 TRANSFER -18 File WriterStatus.cpp, Line 186
Could not perform EndTrack
上午 11:08:10 #23 Phase 38 File dlgbrnst.cpp, Line 1550
Burn process failed at 24x (3,600 KB/s)
上午 11:08:10 #24 Text 0 File Scsicmd.cpp, Line 386
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001) built by: WinDDK, size=16512 bytes, created 2002/5/6 上午 11:01:14
贊助商連結
可是做完抹除後,燒錄機不管用甚麼片下去燒,通通都會回報Medium speed error
而且不只用nero燒,用clonecd或cdrwin都一樣會回報Medium speed error
經過我試了老半天的結果,我又發現
只有原來拿去做抹除的那種cdrw才能正常燒錄!!@@||
而且經我老爸一提我才想起,我那另一台mp7060也是這樣子之後就不吃任何片子了
不過連原來作抹除的那種cdrw都不吃了,為甚麼會這樣呢?
在最後附上nero存下來的log:
Windows XP 5.1
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 2002/5/6 上午 11:01:22
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.44, size=172099 bytes, created 2002/7/6 下午 01:01:43
Nero Version: 5.5.8.2
Recorder: <RICOH CD-R/RW MP7240A> Version: 2.02 - HA 2 TA 1 - 5.5.8.2
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <Copystar FANTOM DVDROM> Version: 1.0g - HA 0 TA 0 - 5.5.8.2
Adapter driver: <Copystar> HA 0
Bus Type : default (0) -> SCSI
=== Scsi-Device-Map ===
CdRomPeripheral : CopystarFANTOM DVDROM 1.0g Copystar Port 0 ID 0 DMA: ?
CdRomPeripheral : RICOH CD-R/RW MP7240A atapi Port 2 ID 1 DMA: On
DiskPeripheral : IBM-DTTA-350640 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD-165P atapi Port 3 ID 1 DMA: On
DiskPeripheral : QUANTUM FIREBALLP LM20.5 atapi Port 4 ID 0 DMA: On
DiskPeripheral : ST330620A atapi Port 4 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 34603008 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261600kB)
Free physical memory: 91MB (94004kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off
CD-ROM (ISO)
7.7.2002
上午 11:07:50 #1 Text 0 File Isodoc.cpp, Line 5383
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : Multibyte
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
上午 11:07:50 #2 Phase 75 File dlgbrnst.cpp, Line 1550
JustLink activated
上午 11:07:50 #3 Text 0 File Reader.cpp, Line 118
Reader running
上午 11:07:50 #4 Text 0 File Writer.cpp, Line 129
Writer RICOH CD-R/RW MP7240A running
上午 11:07:50 #5 Text 0 File Burncd.cpp, Line 2778
Turn on Track-At-Once, using CD-R/RW media
上午 11:07:50 #6 ISO9660GEN -11 File geniso.cpp, Line 4428
First writeable address = 0 (0x00000000)
上午 11:07:50 #7 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 9333 (9333) = #9333/2:4.33
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
上午 11:07:51 #8 Text 0 File DlgWaitCD.cpp, Line 199
Last possible write address on media: 336224 (74:44.74)
Last address to be written: 9332 ( 2:06.32)
上午 11:07:52 #9 Text 0 File DlgWaitCD.cpp, Line 1394
Recorder: RICOH CD-R/RW MP7240A;
CDR code: 00 97 31 01; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1F 01 (LI 97:31.01), 3: 4A 2D 00 (LO 74:45.00)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
上午 11:07:54 #10 Text 0 File ThreadedTransferInterface.cpp, Line 834
Prepare recorder RICOH CD-R/RW MP7240A for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close CD
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 19421184
上午 11:07:54 #11 Text 0 File ThreadedTransferInterface.cpp, Line 862
Removed 2 run-out blocks from end of track 1.
上午 11:07:54 #12 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 9333 (9333) = #9333/2:4.33
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 9331 blocks [RICOH CD-R/RW MP7240A ]
--------------------------------------------------------------
上午 11:07:54 #13 Phase 24 File dlgbrnst.cpp, Line 1550
Caching of files started
上午 11:07:54 #14 Phase 25 File dlgbrnst.cpp, Line 1550
Caching of files completed
上午 11:07:54 #15 Phase 36 File dlgbrnst.cpp, Line 1550
Burn process started at 24x (3,600 KB/s)
上午 11:07:54 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1961
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
上午 11:07:54 #17 Text 0 File Mmc.cpp, Line 15735
Set BUFE: JustLink -> ON , JustSpeed : ON
上午 11:08:08 #18 SCSI -1152 File Cdrdrv.cpp, Line 1399
SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x05050000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x64
Sense Qual: 0xC0
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x64 0xC0
上午 11:08:08 #19 MMC -1152 File Writer.cpp, Line 330
Medium speed error
上午 11:08:08 #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion
上午 11:08:08 #21 CDR -201 File WriterStatus.cpp, Line 186
Invalid writestate
上午 11:08:08 #22 TRANSFER -18 File WriterStatus.cpp, Line 186
Could not perform EndTrack
上午 11:08:10 #23 Phase 38 File dlgbrnst.cpp, Line 1550
Burn process failed at 24x (3,600 KB/s)
上午 11:08:10 #24 Text 0 File Scsicmd.cpp, Line 386
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001) built by: WinDDK, size=16512 bytes, created 2002/5/6 上午 11:01:14
贊助商連結