我好久以前 把我的642R-51 改成硬撥
韌體如下
24.2.1
ZyNOS S/W Version: V2.50(AJ.3)Feb_2 | 2/2/2001
ADSL Chipset Vendor: Alcatel, Version 3.7.12
Zyxel> sys version
ZyNOS version: V2.50(AJ.3)Feb_2 | 2/2/2001
romRasSize: 1009000
system up time: 862:38:27 (1282a056 ticks)
bootbase version: V1.05 | 4/14/2000
詳細方法我已經忘記了
====
依稀彷彿好像是用ftp上傳韌體的
ip : 192.168.1.1
port : 21
username : root
password : 就是你telnet進去的passwd
有2個檔案
rom-0 <== 設定檔 (可讀寫) 16kb
ras <== 韌體 (僅可讀) 8xxkb
覆蓋ras應該就是更新韌體
ps. 參考 Menu 24.7.1 - System Maintenance - Upload System Firmware
====
再來是設定硬撥
我把我記得的寫出來
Menu 1 - General Setup
Route IP= Yes
Route IPX= No
Bridge= No
Menu 4 - Internet Access Setup
ISP's Name= urISP
Encapsulation= PPPoE
Multiplexing= LLC-based
VPI #= 0
VCI #= 33
Service Name= Any
My Login=
[email protected]
My Password= urpasswd
Single User Account= Yes
IP Address Assignment= Dynamic
IP Address= N/A
ENET ENCAP Gateway= N/A
Menu 11.1 - Remote Node Profile
Rem Node Name= urISP Route= IP
Active= Yes Bridge= No
Encapsulation= PPPoE Edit PPP Options= No
Multiplexing= LLC-based Rem IP Addr= 0.0.0.0
Incoming: Edit IP/IPX/Bridge= No
Rem Login=
Rem Password= ********
Outgoing: Session Options:
My Login=
[email protected] Edit Filter Sets= No
My Password= urpasswd PPPoE Idle Timeout(sec)= 0
Authen= CHAP/PAP PPPoE Service Name= Any
Schedule Sets= 1, 1, 1, 1
====
廢話很多 也不知道有沒有用
我比較好奇的是 新的韌體有什麼功能呢?
還有呀 642r-51 可以用 642r-11 的韌體嗎?