STOP: 0xC000026C



贊助商連結


頁 : [1] 2

mcgwier
2001-08-07, 06:02 PM
硬碟換上了80pin ultradam/100 ide的排線,出現籃底白字,無法排除,用2000PRO光碟裡的修復也不行,在重安裝一切順利軟體自行第一次的開機又是出現了籃底白字的晝面,無法排除只好又把排線換回來。

第二次把燒錄機裝在IDE 1和硬碟的同一線上的第二台,開機又是出現籃底白字,只好又是換回來,就能正常開機了。

第三次在家中另一台電腦灌2000PRO,硬碟拔到這一台開機,因是抽取式將這二台電腦硬碟對調開機,二台都不能開機又是籃底白字。

這一次在更新BIOS之後又無法開到WIN2000裡,出現籃底白STOP:c000026c Unkow Error......將BIOS改回原版本,還是進不去WIN2000裡,誰能解決這個問題呀!

小弟硬體如下:主機板ASUS CUV4X-E含音效
CPU Celeron800
硬碟MOXTOR14.3GB

贊助商連結


a650520
2002-03-08, 10:58 PM
各位高手
小弟我有一個硬碟灌W2K SERVER用了好幾個月了
突然現在無法開機..一進開機畫面跑了一半就出現藍色畫面..按F8選擇其他開機模式也一樣..用光碟修復也不行...
當成資料碟還可以讀取..
以下就是藍色畫面的文字..有人可以幫我一下嗎..如果要重灌我就毀了
感激

-------------------------------------------------------------------------
STOP:C000026c Unkown Hard Error
Unkown Hard Error
If this the first time you've seen this stop error screen restart your computer.
If this screen appears again,follow these setup:
Check to make sure any new hardware or software is properly installed.
If this is a new installation,ask your hardware or software manufacturer for any Windows 2000 updates you might need.
If problems continue,disable or remove any newly installed hardware or software .
Disable BIOS memory options so such as caching or shadowing.
If you need to use safe mode to remove or disable restart your computer,press F8 to select Advanced startup Options,and then select safe mode .
Refer to your getting started manual for more information on troubleshooting stop error.:confused:

daryl
2002-08-27, 06:15 PM
我在win2000pro上無法安裝亞邁公司的V-Gear My VCD TV plus電視卡,
安裝時會有windows無法載入...\system32\drivers\BT848.SYS...錯誤代碼為0xc000012f,
於是乎我就去尋求該公司的技術支援,
目前也無法找出解決辦法,
我另外去查尋有關"0xc000012f"這個錯誤代碼的意義,
查到了某網站所提供的訊息如下:
STOP c000026c unable to load device driver %SystemRoot%System32 Drivers<driver>.sys. Device driver could not be loaded, error status 0xc000012F.

<driver>.sys is the name of the malfunctioning driver. If this happens, you'll need to stop the driver from loading to allow Windows 2000 to boot correctly.

Boot your Windows 2000 CD-ROM, and select R and then C from the starting menu to start the Recovery Console. You'll need to provide the Administrator account password to continue.

At the Recovery Console command prompt, type disable <driver>.sys, where <driver>.sys is of course the name of the faulty driver. This flags the driver as disabled and keeps it from loading at the next reboot.

Type exit, reboot the system normally and check for any other errors.
Note: If this is a storage device driver that is required by the system to load the OS, it may have become corrupted and you may need to replace it with a fresh copy. You can use the Recovery Console to copy in an uncorrupted copy as you would from the command line in Windows.

意思好像是該硬體的驅動程式無法正常的工作!
裡面又教人如何停止該驅動程式在開機時被載入的方法,
其中有一段:
Boot your Windows 2000 CD-ROM, and select R and then C from the starting menu to start the Recovery Console.
我不太瞭解該段話的實際做法為何!?

請問有人知道該段話的做法嗎?

Schnaufer
2002-08-27, 07:53 PM
  參考一下 http://www.geocities.com/amethman/

daryl
2002-08-28, 01:23 AM
最初由 Schnaufer 發表
  參考一下 http://www.geocities.com/amethman/

Thank you!
I tried the driver but the problem remained!
I have contacted with the manufacturer for tech support!
They're tring to help me now! (they never meet such a problem!)
Maybe it is a problem can't be resolved~~:(
...Anyway...Thank you very much!

Schnaufer
2002-08-28, 01:26 AM
  有空我再來研究一下好了。

Schnaufer
2002-08-29, 12:55 AM
  試試看以下程序:
Start the computer by using the Windows 2000 CD. At the Welcome to Setup screen, press R for repair, and then press C for Recovery Console.
Enter the Administrator password and the number of the Windows 2000 installation that you want to repair.
At the Recovery Console command prompt, type disable BT848, and then press ENTER.
Type exit, and then press ENTER, to restart the computer.

daryl
2002-08-29, 01:35 AM
最初由 Schnaufer 發表
  試試看以下程序:
Start the computer by using the Windows 2000 CD. At the Welcome to Setup screen, press R for repair, and then press C for Recovery Console.
Enter the Administrator password and the number of the Windows 2000 installation that you want to repair.
At the Recovery Console command prompt, type disable BT848, and then press ENTER.
Type exit, and then press ENTER, to restart the computer.

多謝!已可以disable掉那個無法載入的driver了!
但是…該驅動程式是小弟所安裝的電視卡所必需的,
因此現在變成兩難的局面:
找到新的硬體需要該驅動程式(BT848.SYS),
安裝該檔案就會造成系統的重開機!
不想看到那錯誤的訊息只好將其disable!
但這就無法驅動我的電視卡了!!

無奈~~~~~~~~~
該公司的技術人員也說他們從未遇這樣的問題!
下載最新的driver也是同樣的情形!

目前該公司沒有進一步的通知,
不知道是還在研究還是…放棄了…

Schnaufer
2002-08-29, 01:44 AM
  我有上去看該公司的網頁,此產品應該有支援 Win2K 才對。如果都找不到其他原因,我想,你要不要換插另一個 PCI slot 看看,有時候 IRQ 相衝是很難抓到問題的,尤其 PCI slot 1 通常是和 AGP share IRQ 的,但實際狀況要看各主機板而定。

daryl
2002-08-29, 01:51 AM
最初由 Schnaufer 發表
  我有上去看該公司的網頁,此產品應該有支援 Win2K 才對。如果都找不到其他原因,我想,你要不要換插另一個 PCI slot 看看,有時候 IRQ 相衝是很難抓到問題的,尤其 PCI slot 1 通常是和 AGP share IRQ 的,但實際狀況要看各主機板而定。

Gigabyte 7ZXE
5PCI slot

除了AGP顯示卡外,
其它的PCI卡有:
瑞麗春之頌音效卡
Buffalo網路卡
以及這張一直在搞鬼的亞邁XXXXX電視卡

三張PCI卡"好像"緊鄰著三個slot
與AGP空一個slot
(可能得再打開check一下!)

若是這樣!要如何"插"才比較不會出問題呢?
謝謝指教~~~~~~~~~~~~:)