http://home.kimo.com.tw/58402006/58402006/0220.jpg
我的XP一直狂當~~~
就會出現上圖的畫面~~~~
我己經重灌了好幾次了 :(
那位大大知道這是那裡出了問題~~~
請各位大大幫幫我~~~~

贊助商連結

最初由 威席史坦畢特 發表
http://home.gigigaga.com/chihhung340/58402006/0220.jpg
我的XP一直狂當~~~
就會出現上圖的畫面~~~~
我己經重灌了好幾次了 :(
那位大大知道這是那裡出了問題~~~
請各位大大幫幫我~~~~

圖片出不來呢~~~:(

我之前也會ㄝ
不過換一條記憶體就好了@@
不知道是不是記憶體壞掉ㄉ問題
試試看吧^^

最後幾行寫的是記憶體有問題~~
所以可以把記憶體換掉試試看唷~~

我的也會ㄝ 不知道是哪裡出了問題....

到底是記憶體還是顯示卡驅動程式出了問題ㄋ...

有人知道嗎?

For windows 2000的 參考一下

Error Message:
STOP: 0x00000044 (parameter, parameter, parameter, parameter) MULTIPLE_IRP_COMPLETE_REQUESTS

Explanation:
This is a Windows 2000 Executive character-mode STOP message. It indicates an attempt was made to complete an IRP (I/O request packet) more than once, possibly by more than one driver.

User Action:
If this is the first time you have booted after installing new hardware, remove the hardware and boot again. Check the Microsoft Hardware Compatibility List to verify that the hardware and its drivers are compatible with Windows 2000. For information about the hardware, contact the supplier. If you are installing Windows 2000 for the first time, check the Windows 2000 system requirements, including the amount of RAM and disk space required to load the operating system. Also, check the Hardware Compatibility List to verify that the system can run Windows 2000. If Windows 2000 is loaded and no new hardware has been installed, reboot with recovery options set to create a dump file. If the message continues to appear, select the Last Known Good option when you reboot. If there is no Last Known Good configuration, try using the Emergency Repair Disk. If you do not have an Emergency Repair Disk, contact your technical support group.

那這到底是哪出問題.........

建議你先從驅動程式著手

卻定是記憶體有問題:rolleyes:

我有遇過這樣的狀況 是在換新的CPU跟主機板的時候 後來FORMAT重灌XP之後就OK了 我想不是記憶體的關係吧